Top Compression Fitting

Hilitchi 8Sizes Tube OD 4mm-16mm Brass Compression Sleeves Ferrules Compression Fitting Kit Metric 220Pcs

  • ✅ [QUALITY MATERIAL] Made of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅ [FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅ [HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅ [APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon t....
Check Stock

Hilitchi 3Sizes Tube OD 1/4 5/16 3/8 Brass Compression Sleeves Ferrules Compression Fitting Kit (SAE, 105Pcs)

  • ✅[QUALITY MATERIAL] Made of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube ....
Check Stock

Mens Workout Compression Set Pants and Long Sleeve Shirts Winter Warm Thermal Base Layer Top & Bottom Black

  • MESH MATERIAL: 2pcs compression sets are made of Soft, breathable and moisture-wicking fabrics, Ergonomic compression fit for enhanced range of motion.
  • SWEAT-WICKING & QUICK-DRY: Breathable, Compression shirt and pants can wicks away moisture from the body in fast and accelerate evaporation of the sweat, keep you dry and comfortable while workout and practice.
  • HIGH ELASTICITY: High-Elastic fabric effectively protect muscles, prevent muscle vibration, maintaining physical function. Non-allergenic, slim & tight fit perfect showing off muscle and physique.
  • APPLICATION: Sport clothes for men are great to wear for indoor/outdoor activities (running, cycling, jogging, baseball, basketball, yoga, soccer, hockey, training, tubing, camping, hiking, workout, climbing and any sports.
  • SKIN-FRIENDLY: Mens Compression Pants and Long Sleeve Shirts Featuring Tight Fitting, Soft, Like A Second Skin, if You Prefer Regular Fitting, Pls Order One Size Up. Nice Thermal Set for Men, Thermal Base Layer Men..
Check Stock

Frogwill Mens Posture Correction/Support/Pain Relief Slimming Body Vest Shirt L Black-New

  • Figure-Flattering Trimmer. Smoothing compression fabrics that tuck, boost,.
  • Relaxed-fitting top for smooth comfort across the chest.
  • Creates a lean appearance & build abdominal muscle..
  • Stretchy Firm Tummy Belly Control Slimming Body Shaper Vest Undershirt Magic Compression Muscle Shirt.
  • Relaxed-fitting top for smooth comfort across the chest..
Check Stock

Parker A-Lok 4NU4-B Brass Compression Tube Fitting, Nut, 1/4\ Tube OD

  • Nut tightens and provides compression on the ferrule of a flareless fitting.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • For use with a twin ferrule compression fitting set for a leak-resistant seal in high-pressure applications.
Check Stock

Maxline M8067 Elbow Fitting for 3/4-Inch Tubing (3 Pack)

  • 3 Pack of the MaxLine M8067 Elbow Fitting for 3/4" Tubing.
  • Nickel plated brass fitting guards against corrosion.
  • Double O-ring compression style fitting, tubing can be removed from fitting if needed.
Check Stock

Maxline M8067 Elbow Fitting for 3/4-Inch Tubing (2-Pack)

  • 2 Pack of the MaxLine M8067 Elbow Fitting for 3/4" Tubing.
  • Nickel plated brass fitting guards against corrosion.
  • Double O-ring compression style fitting, tubing can be removed from fitting if needed.
Check Stock

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

  • 【No Damage To Walls & Copper & Supply Lines】This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
  • 【Easy & Fast Remove】1.Remove the ....
Check Stock

Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool

  • 【No Damage To Walls & Copper & Supply Lines】This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut....
Check Stock

Parker A-Lok 8NU8-316 316 Stainless Steel Compression Tube Fitting, Nut, 1/2\ Tube OD

  • Nut tightens and provides compression on the ferrule of a flareless fitting.
  • Chemically hardened type 316 stainless steel for higher strength and greater corrosion resistance than untreated stainless steel.
  • For use with a twin ferrule compression fitting set for a leak-resistant seal in high-pressure applications.
Check Stock

Quickun Brass Compression Fitting Ferrule Sleeve, 3/16\ Tube OD (Pack of 30)

  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
  • 3000 PSI working pressure, Temperature range of -55°F to 250°F (-53°C to 121°C).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Quickun Brass Compression Fitting Ferrule Sleeve, 1/8\ Tube OD (Pack of 30)

  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
  • 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock