Top Battery Connector For Arduino

6Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 LED Strip Light Power Module 6F22 6LR61 mn1604 pp3 Baterries

  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
  • With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
  • Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
  • Not fit for Arduino Nano, Effect pedals..
  • Any quality issues, please feel free to contact US..
Check Stock

SunFounder 2560 R3 Project Super Starter Kit with 2560 Controller Board and R3 Controller Board

  • For Arduino kits and Affordable Price - This is a complete Kit with more than 200pcs components for adults, students and beginners.. Includes 2560 controller board and USB cable, 100% compatible with Arduino Mega 2560 R3 Mega328 Nano for Arduino kit..
  • Detailed Instructions - This 2560 Kit with detailed pdf tutorial in the CD, you can learn to code and program faster and easier with all the components..
  • 25 Projects Provided - As an upgraded starter kit compatible with arduino 2560 controller board, more than 20 interesting lessons are included. Allowing for a dynamic creative learning experience..
  • Compatible with Arduino- R3 board compatible with Arduino,use ATMEGA16U2 chip, Faster transfer rates and more memory..
  • Control using r3 ATmega328P chip, Includes new pin configuration (SCL, SDA, IOREF) Clearly print on the female header connector, more precise and easier to use the wire..
Check Stock

ACEIRMC 3pcs Type-C USB CH340 5V 16MHz for Nano 3.0 ATmega328P Controller Board Compatible for Arduino Nano CH340 USB Driver Nano V3.0 ATmega328

  • for ARDUINO COMPATIBLE - Use the Nano-C with the for Arduino development IDE on your PC, Mac or Linux computer (USB driver installation required on some OSes).
  • PERFECT FOR BEGINNER OR EXPERT - Learn electronics and programming or jump start your latest project. Get started with the Nano-C in just minutes.
  • The Nano-C is breadboard-friendly and can be powered by USB, regulated 5V supply or unregulated 7-12V source. Connectors shipped unsoldered to fit the smallest of spaces.
  • Nano C for Arduino | USB Type-C Connector | ATmega328P | 5V | 16MHz | Without Cable | Connectors Unsoldered.
  • Uses the latest USB Type-C connector for compatibility with modern laptop and desktop computers. The Type-C connector is fully reversible which makes connecting a breeze.
Check Stock

SDTC Tech 2-Set 4X 1.5V AA Battery Holder and I Type Battery Snap Connector Kit 6 Volt Thicken Plastic Battery Case Box

  • The AA Battery Holder suit for 4x 1.5V AA batteries, and ouput voltage is 6 volt..
  • I Type Battery Snap Connector with hard plastic shell, 15 cm / 6 inch length, easy to solder or connect..
  • Made of thicken plastic shell, copper conductor and nickel-plated steel spring, to ensure effective good contact, sturdy and durable..
  • 4 AA Battery Case Size is 57 * 32 * 29mm, widely used in electronic circuit experiment, Arduino projects, led devices, household appliances etc..
  • Package includes 2pcs 4x AA Battery Holder, 2pcs I Type Battery Snap Wire Leads..
Check Stock

SDTC Tech 2-Set 8X 1.5V AA Battery Holder and I Type Battery Snap Connector Kit 12 Volt Thicken Plastic Battery Case Box

  • The AA Battery Holder suit for 8x 1.5V AA batteries, and ouput voltage is 12 volt..
  • I Type Battery Snap Connector with hard plastic shell, 15 cm / 6 inch length, easy to solder or connect..
  • Made of thicken plastic shell, copper conductor and nickel-plated steel spring, to ensure effective good contact, sturdy and durable..
  • 8 AA Battery Case Size is 63 * 58 * 30mm, widely used in electronic circuit experiment, Arduino projects, led devices, household appliances etc..
  • Package includes 2pcs 8x AA Battery Holder, 2pcs I Type Battery Snap Wire Leads..
Check Stock

9V Battery Holder E-outstanding 2PCS Black 6F22 9V Battery Storage Case Box with 2.1x5.5mm DC Male Plug and Wire Leads for Arduino UNO R3 Battery Clip Container

  • Made of high quality materials. Lightweight and easy to carry..
  • Designed with spring clips for easy battery installation and removal..
  • EASY TO INSTALL AND SAVE WORK: The cable comes with a 9V battery holder and 3 screw fixing holes on the base for easy fixation.
  • With this snap cable you can save yourself the work of soldering the battery snap to the DC coax plug.
  • Widely used in Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, Development Boards, Evaluation Boards, Breadboards, Arduino DIY,....
Check Stock

ZRM&E 6V Power Box 4xAA Battery Holder Case with DC 5.5x2.1 Connector Mate with Barrel Jack Connector on Arduino

  • Package includes: 1 x 4xAA Battery Holder Case.
  • The connector is paired with the barrel jack on Arduino to supply power to your device, power supply to LED lamp power supply, etc., and you can also go to DIY for more play.
  • 5 inch cable termination standard 5.5x2.1mm center positive barrel jack connector.
Check Stock

SparkFun RedBoard Artemis Nano Machine Learning Development Board Includes BLE 1 megabyte of Flash USB-C Qwiic I2C MEMS Microphone Compatible with Arduino IDE TenserFlow Models Small Footprint

  • A light weight, 0.8mm thick PCB, with on board LiPo-battery charging and a Qwiic connector.
  • Dual row of ground connections make it easy to add lots of buttons, LEDs, and anything that requires its own GND connection.
  • Fully compatible with the SparkFun's compatible with Arduino core and can be programmed easily under the Arduino IDE platform.
  • With 1MB flash and 384k RAM you'll have plenty of room for your sketches..
  • The Artemis module runs at 48MHz with a 96MHz turbo mode available and compatible with Bluetooth to boot. FCC/IC/CE Certified 8/16/2019 (ID Number 2ASW8-ART3MIS).
Check Stock

Screw Terminal Block Breakout Shield Module for Arduino UNO R3

  • Terminal Block Breakout Shield Module - for Arduino UNO R3. the item has been soldered and assembled..
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
  • Standard IDC40 pitch 0.1" header, you can use 40pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment..
  • With power on LED indicating. red reset button on the side. with a ICSP adapter connect header. FR-4 fiber glass PCB, dual copper layers..
  • NOTE: the item not include Arduino Uno module..
Check Stock

BESPORTBLE Air Blower, Mini Fan Blower for Dinosaur Costume or Doll Mascot Head or Other Inflatable Costume, 6V Powered by 4xAA Dry Battery (Without Battery)

  • Package includes: 1 x 4xAA Battery Holder Case.
  • The connector is paired with the barrel jack on Arduino to supply power to your device, power supply to LED lamp power supply, etc., and you can also go to DIY for more play.
  • 5 inch cable termination standard 5.5x2.1mm center positive barrel jack connector.
Check Stock

Arduino MKR Zero with Headers [ABX00012]

  • The Central Board for your Electronic Project.
  • Powerful 32-bit Microcontroller and Micro SD Memory Card Connector.
  • Ideal for: Music, Audio processing, robotics, art installations.
  • Part of the Arduino Maker Board Family for IoT Devices, easy to configure with Arduino Software..
Check Stock

Arduino MKR GPS Shield [ASX00017]

  • A plug 'n' play shield for experimenting with monitoring fleets, high-altitude measurements, or any kind of project requiring localization of devices..
  • Arduino MKR GPS Shield uses the u-blox SAM-M8Q GNSS (Global Navigation Satellite System) module. It is meant to be used on top of boards in the Arduino MKR boards, but thanks to its Eslov connector, it is also possible to hook it up to any board..
  • It comes with a dedicated library that allows two different interfaces and offers a consistent set of APIs designed for a full usage of the GPS acquired information..
  • Operating voltage is 3.3V, but this shield comes also with an on-board holder for CR1216 batteries..
  • The MKR GPS Shield has an additional connector meant as an extension of the I2C bus. The extra I2C port, also referred to as the Eslov self-identification port comes with: SDA, SCL, GND, +5V, and an extra digital pin, meant to send an alarm to the otherwise plain I2C devices connected to it..
Check Stock