Top Bevel Gear Angle

2Pcs Tapered Bevel Pinion Gear Bevel Gears 12mm Hole 1.5 Module 16 Teeth for Hardware Mechanical Rotation

  • ✅【Widely Usage】Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.Suitable for all kinds of mechanical transmission occasions..
  • ✅【16 Teeth Tapered Bevel Pinion Gear 】This mechanical bevel gears only can fits for 1.5 module gear,16 teeth,90 degrees,12mm Hole Diameter..
  • ✅【Easy to Use】The bevel gear set comes with two M5 screws for simplicity and convenience to use.Lower contact ratio between gears, higher load capacity..
  • ✅【Robust and Durable】The Bevel Gears Wheel are made of 45# steel with high wear-resistance,strong and durable..
  • ✅【Note】Please note that this 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
Check Stock

PGFUN 2 Pcs 1M 20 Teeth 5/6/8mm Shaft Hole Tapered Bevel Gear 1:1# 45 Steel 1 Module 90 Degree Steering Gear with M5 Fixing Hole (5 mm)

  • 18 teeth for use with L152BY-G mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

Ingersoll Rand 3445MAX Air Angle Grinder, 4.5\ Wheel, 5/8 in.- 11 Thread, 12000 RPM, Rear Exhaust, 0.88 HP

  • Comfort: With a lightweight composite housing, enhanced grip and ergonomic design, the Max Series Angle Grinders are easier to work with for long periods of time..
  • Power: With an ideal power-to-weight ratio, the Max Series Angle Grinders are great for high-performance material removal. Its 0.88 hp and 12,000 rpm motor delivers the power you need to grind through the toughest jobs..
  • Versatile: The Max Series Angle Grinders are a versatile set of tools you can use in most major markets, from vehicle repair and body work to construction and metal fabrication..
  • Internal governor maximizes speed under load, thus increasing your rate of material removal.
  • Built-in lubricating wick optimizes the life of the angle gear set by improving lubrication to the bevel and pinion gear set.
Check Stock

Boston Gear HL148Y-P Bevel Pinion Gear, 2:1 Ratio, 0.375\ Bore, 16 Pitch, 12 Teeth, 20 Degree Pressure Angle, Straight Bevel, Keyway, Steel with Case-Hardened Teeth

  • 12 teeth for use with HL148Y-G mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Case-hardened teeth for applications where hardness and strength are needed to transmit torque and motion.
Check Stock

uxcell® 90 Degree Shaft Angle Replacement Part Spiral Bevel Helical Gear Set 3pcs

  • Ring Gear Size: 44 x 13mm/1.73'' x 0.51''(Max.D*T).
  • Pinion Gear Size: 19 x 12.5mm/0.75'' x 0.49''(Max.D*T).
Check Stock

Keylights Key Blank Specialty Bagged Sc1 Purple Plastic Head, Yellow Light

  • Ring Gear Size: 46 x 14mm/1.8'' x 0.55''(Max.D*T).
  • Pinion Gear Size: 17 x 12mm/0.67'' x 0.47''(Max.D*T).
Check Stock

Saw, Miter - 10 Electric Miter Saw: Single Cut, Saws - Power

  • MOTOR: 12 amp motor for professional power.
  • BEVEL: 0-45 degree bevel angle range, to the right and left allowing users to quickly and easily flip the saw blade and leave the material in place.
  • MITER: 57 degree miter angle to the right, for ultra flexibility with 45 Degree miter angle to the left.
  • MITER SCALE: White on black miter scale for superior accuracy and visibility.
  • SLIDE SYSTEM: Linear ball bearing slide system.
  • POSITIVE STOPS: Positive stops on miter and bevel scale, for easy to read measurements and quick settings.
  • METABO HPT: Same tools. New name. Hitachi power tools has renamed to Metabo HPT.
Check Stock

Westcott 7-Inch Goniometer Quick Angle Protractor Measuring Tool (GO-180)

  • 【Dimension】- Vernier Bevel Protractor.
  • Measure angle: 320 Degrees；Material: Tool Steel.
  • 【High Quality】- This product is made of high-quality tool steel, practical and durable. It is not easy to rust, easy to carry and easy to store..
  • 【Easy Operation】- Universal angle ruler consists of ruler body, 90° square ruler, cursor, brake, base ruler, straight ruler, card block etc.Easy to operate and versatile, very practical..
  • 【Design】- 0-320 Measurement Angle.This universal bevel protractor is used to measure precise angle or angle measurements inside and outside the scriber. Measuring range is 0-320 degrees, easy to use..
  • 【Practicality】- Perfect for construction jobs, cabinet-making and fine carpentry, where a standard protractor or t-bevel won't fit.It is suitable for measuring tools of precise workpiece angle..
Check Stock

Metabo HPT MultiVolt 36V Sliding Miter Saw 10-Inch Blade Dual Bevel Includes Battery & Charger C3610DRAQA

  • MULTIVOLT: Miter saw can be powered by a MultiVolt 36 Volt battery (included) or the MultiVolt AC adapter(sold separately).
  • FEATURING: Dual bevel sliding miter saw providing the power and precision a pro demands.
  • INCLUDES: 36 volt miter saw, 4 AH battery and charger.
  • AWARD: Rated Best 10-Inch Miter Saw by Pro Tool Reviews 2020.
  • MITER AND BEVEL: Miter and bevel: 0-60 degree miter angle to the right and 0-55 degree miter angle to the left and also 0-48 degree bevel angle range....
Check Stock

Advanced Build Quality Veritas Mk.II Honing System -- by Veritas

  • Integral blade registration squares the blade and sets the bevel angle in one easy step.
  • Designed to accept flat and tapered blades, as well as blades with irregular geometry.
  • Three-position eccentric roller allows a micro-bevel to be honed quickly and accurately.
Check Stock

Digital Angle Finder Protractor 0-360 Degree T-Bevel Gauge & Protractor with Horizontal Vertical Bubble & Full LCD Display for Woodworking, Metalworking, Construction

  • Four Large Control Buttons: Pressing hold button on the digital angle finder to hold the measurement at any angle, it helps the users effectively record the angle values. In addition, including power on/off, read reverse angle, flip display, and clear readout..
  • Digital Sliding T-bevel: Turn the center knob to lock the angle, and use the protractor to copy any angle from 0 to 360 degrees, In addition, easily get 45 degree angle with a T bevel gauge..
  • LCD Display & Bubble Level: This highly protractor tool is equipped with a large LCD display for easy reading and integrates a steel locking knob for adjustment. There is a perfectly positioned bubble level on the end of the digital angle finder body to ensure the level before tracing any angles and making any cuts..
  • Worry Free Customer Service: We back each T bevel gauge with a free 1 year exchange service plus lifetime technology support, giving you complete peace of mind. Please don’t hesitate to contact us for support or questions..
Check Stock

Digital Angle Finder Protractor 0-360 Degree T-Bevel Gauge & Protractor with Horizontal Vertical Bubble & Full LCD Display for Woodworking Metalworking Construction

  • ... requirements for different accuracy..
  • Four Large Control Buttons: Pressing hold button on the digital angle finder to hold the measurement at any angle, it helps the users effectively record the angle values. In addition, including power on/off, read reverse angle, flip display, and clear readout..
  • Digital Sliding T-bevel: Turn the center knob to lock the angle, and use the protractor to copy any angle from 0 to 360 degrees, In addition, easily get 45 degree angle with a T bevel gauge..
  • LCD Display & Bubble Level: This highly protractor tool is equipped with a large LCD display for easy reading and integrates a steel locking knob for adjustment. There is a perfectly positioned bubble level on the end of the digital angle finder body to ensure the level before tracing any angles and making any cuts..
  • Worry Free Customer Service: We back each T bevel gauge with a free 1 year exchange service plus lifetime technology support, giving you complete peace of mind. Please don’t hesitate to contact us for support or questions..
Check Stock