Top Bilge Paint

Johnson Pumps - 22102 PROLINE Bilge Pump 1000 GPH 2.5A

  • No one wants to worry that their boat is slowly taking on water because the bilge pump has failed. Well, you can sleep soundly with the reliable 2000 bilge pump on the job.Small size, high efficiency, low current (low cost switching power supply supporting).
  • to achieve a small size perfect combination of high flow..
  • It is non-automatic and must be paired with a float switch or sensor and ON/OFF/AUTO switch. Unique automatic "discharge" function can bear the long-term continuous operation under nearly congestion condition Impact resistant ABS housing.
  • Used in a boat,you can also use it in solar powered waterfall for your backyard, in a battery back-up sump system,etc. It empties the bilge roughly 25% faster than 1500gph bilge pump,and will continue to pump even when it encounters some minor debris.
  • Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies submersible bilge pumps are tough enough for any bilge.Tough, efficient, long life motor.Offer high capacity output Water cooled long-life motors.
  • Ignition protection Water/moisture tight seals.
  • Snap lock strainer base for easy installation and removal.
Check Stock

Ogrmar Automatic Boat Bilge Pump Float Switch Moisture Tight Seals 12/24/32VDC Ignition Protected Mercury

  • Compact efficient long life motors: Small volumn and portable bilge pump is made of long life motors .It can Improve work efficiency.
  • Exclusive Moisture Ting Seals: Bilge pump is made from heavy duty marine sealant and corrosion material Protection.
  • Cleanable Strainer: The pump base is used by high qulity easy clean snap lock strainers. the life-span of the bilge pump could be prolonged..
  • Easy to Install: Design common installation location and it can use with the bilge switch.
  • Wide Application : Bilge pump can be used in aquarium,fishing boats,fountain and other places to easily drain the water.
Check Stock

Acouto Bilge Air Blower 12V 4inch 270CFM in‑Line Marine Bilge Air Blower 4\ DC Electric Fan Boat Accessory 12VDC White

  • 12V Bilge Air Blower---- This bilge air blower 12v is suitable for 4in diameter hose and provides ventilation for engine compartments, galleys, bilges and heads. 100% brand new, please be assured of your purchase.
  • High Efficiency---- Six‑blade fan maximizes airflow and efficiency, more reliable and practical. Very low current draw, high volume air flow, and long service life. Flow: 270 CFM.
  • Stable Performance---- Sealed motor shaft for moisture protection, to have better performance. Corrosion proof design and water resistant motor casing for use in the marine environment.
  • High Quality ABS---- 4" Marine Bilge Air Blower has white ABS plastic construction, wear-resistant and reliable in use. The manufacture of the 4" in-line marine bilge air blower meets the strict quality requirements.
  • Easy to Install---- The 4" in-line marine bilge air blower has built-in mounting feet for vertical or horizontal installation. Ideal and direct replacement for old or damaged bilge air blower, dependable to use.
Check Stock

Five Oceans Bilge Pump Three-Way Rocker Control Panel Switch with Circuit Breaker, Black, Automatic-Manual-OFF functions, LED light indicator, FO-3851

  • With this Three Way Bilge Pump Switch, you do not have to change a fuse. In case of having a short circuit, just press the button of the circuit breaker to restore the circuit.
  • PROVIDE remote control of automatic bilge pumps or bilge pumps with float switches.
  • 3-WAY Stylish Rocker Switch has Auto, OFF and Manual positions. Power indicator light confirms system power.
  • MANUAL position has spring back feature to prevent bilge pump from continuously running.
  • COMPATIBLE with bilge pumps that draw up to 10A - 12/24VDC. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

AMRM-4505-7 Attwood Sahara Automatic Bilge Pump - 500 GPH

  • The Attwood Sahara Bilge Pump is a durable, compact, and easy to install automatic bilge pump. The Sahara has everything contained in one compact yet durable package, making this pump a great option for tight spaces. This series of bilge pump features a 316 stainless steel motor shaft for corrosion resistance and a durable high-impact, glass-filled polyester impeller. The base of the pump has quick, one-handed removal for easy disassembly for cleaning..
  • Pumps include 36" lengths of 16-gauge caulked and tinned copper wire. An automatic-switch bilge pump is a requirement for any vessels 20’ especially those that accommodate overnight passengers and crew. All Attwood bilge pumps come with a 3 year manufacturer's warranty..
  • Mercury-free switch. Test knob for easy operational check Non-restrictive float movement. Larger filter area resists clogging.
  • Free flow of water around housing keeps motor cool. 316 Stainless Steel motor shaft for saltwater corrosion resistance. Durable high-impact, glass-filled polyester impeller.
  • Sahara S500 Part #: AMRA-4505-7, GPH at Open Flow: 500, GPH at 3.3' Head: 350, Hose Size: 3/4" I.D..
Check Stock

LINGVUM Bilge Pump for Kayak Canoe and Boat - 17 Inch Manual Portable Kayak Hand Water Pumps with Reversible Hose Orange

  • CONVENIENT BILGE MANUAL WATER PUMP --- Our manual bilge pump length is 16.5", the maximum unfolded length is 25.5", equipped with a 23.2"long hose. At the same time, Our bilge pump has two water inlets and a long hose that attaches to either end, removing water quickly and reducing your fatigue.
  • MAKES WATER REMOVAL EASIER --- The maximum displacement is 0.4L each time. The premium rubber seal creates a watertight seal that won't come loose or leak allowing for the maximum amount of suction and discharge that performs better than other hand bilge pumps. Suction spacers can allow water to flow into the manual water pump at the fastest speed.
  • SCENE TO BE USED --- Perfect for emergency water removal in boats, kayaks, canoes or dinghies. With our kayak bilge pump, rest easy knowing that you’ll have a quick and easy way of removing water in those difficult times. Spending time on the water is supposed to be fun! Perfect boating and kayaking accessory.
  • LIGHTWEIGHT & PORTABLE --- This kayak hand pump is light (Only 0.78 pounds), easy to carry and store. Foam padded handgrip is non-slip and provides buoyanc....
Check Stock

Amarine Made 1100gph 12v Boat Marine Plumbing Electric Bilge Pumps (1100gph 12v)

  • 【1100gph with 1-1/8 Hose】The Amarine-made submersible bilge pumps are tough enough for any bilge. Use together with a 1 1/8 inch hose..
  • 【High Flow】: for use from 22-234L / Min (1.32-14.04 cubic meters / hour).
  • 【Small but Efficient】Small size, high efficiency, low current (low cost switching power supply supporting).
  • to achieve a small size perfect combination of high flow.
  • 【Advantages】Built for the harsh marine environment, good for both saltwater and freshwater. The water-cooled engine ensures a long service life.Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies submersible bilge pumps are tough enough for any bilge.
  • 【Applications】Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, skiff, dingy, fish tank,as a portable shower, etc..
Check Stock

Hand Bilge Pump Manual Hand Water Pump for Kayaks Canoes and Boats Emergency Hand-Operated Marine Bilge Pump with Reversible Hose

  • ⛵HAND BILGE PUMP FOR BOATS: Our manual bilge pump length is 17", and the maximum unfolded length is 28.3", which is easy to store and takes up minimal space. It’s the perfect boating accessory for kayaks, canoes, dinghys and small boats. Our bilge pump remove water quickly and downward strokes for maximum efficiency and less fatigue.
  • ⛵MAKES WATER REMOVAL EASIER & FASTER: Our hand water pump features a 34.6" long hose with a 1.16" intake nozzle and 1.37" diameter hose that makes reaching the bottom of your boat easier and removing excess water faster. This hand suction pump works great to remove water from the bottom of a motorboat, canoe or dinghy.
  • ⛵EASY TO USE: Just simply connect the hose to the end of the pump, insert the bottom of the pump into the water, and use the handle to start pumping. It sucks water when you push the handle in, and disperses the water when you pull the handle out!.
  • ⛵NO CLOG FILTER & ANTI-LEAK DESIGN GASKET: Our marine bilge pump Features a filtered nozzle to prevent seaweed, leaves and debris from clogging this hand water pump. And The premium rubber sea....
Check Stock

attwood Sahara MK2 800 GPH 12-Volt Automatic Bilge Pump

  • 800 GPH, 12V, Fuse size: 4A, Outlet type: 3/4" & 1" barbs, Check valve: yes, Wire length: 29 1/2".
  • The easiest, most reliable automatic bilge pump ever designed.
  • The only automatic bilge pump that eliminates air-locks, Patented X-Air Impeller ejects trapped air in the pump and pipework.
  • Flexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation.
  • Single-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat’s hull.
  • Universal Backwards Compatible Design: 7-pump mounting hole pattern for replacing any top bilge pump in its category.
  • SteadySwitch: Buoyancy control reduces cycling, draining the bilge not the battery.
  • No Pipe Or Hose Removal Required: Reduces the time that it takes to replace the cartridge.
  • Improved Motor Cooling/Heat Dissipation: Prevents overheating that may cause failures, such as blown fuse, leaking, etc..
  • Includes straight outlet and check valve.
Check Stock

Erfo 3\ in-Line Marine Bilge Air Blower Electric for Boat Bilges and Heads, DC12V, 2.5A, 130CFM, 3\ Outlet Hose

  • 【Durable】 In-line marine blower use anti-aging, anti-ultraviolet ABS thermoplastic and strong reinforcement materials to achieve maximum durability and reliability..
  • 【Low Noise】 Marine bilge air blower adopts durable plastic fan shell and blades, which is small in size but quiet operation..
  • 【Energy Saving】Bilge blower has a compact structure, high air volume and a long service life. Easy to install on any surface, which can provide higher airflow and lower current consumption..
  • 【Effective Ventilation】Powerful blower, four-blade fan, air flow is 130CFM. The fan is made of high-strength nylon, which can maximize airflow and efficiency..
  • 【Widely Application】In-line marine bilge air blower is suitable for boats bilge, engine compartments, channels, yachts, RVs other space ventilation applications..
Check Stock

Boat Marine Manual Hand Bilge Waste Water Transfer Pump Qiilu Plastic Handle Marine Manual Diaphragm Hand Bilge Water Pump for Boat Yacht

  • Excellent Design------Boat Marine Manual Hand Bilge Waste Water Transfer Pump is suitable for compact manual self-priming pump. Provides flow rates up to 12 gallons per minute (45 liters per minute)..
  • Durable and Reliable------Boat Marine Manual Hand Bilge Waste Water Transfer Pump has a robust and durable construction designed for marine applications. Ideal as a backup bilge pump in case your electronic bilge pump fails..
  • Specifications------ Manual Diaphragm Pump, Material: ABS, Diaphragm Manual Pump with Two Position Handle, Packing List: 1 x Manual Diaphragm Pump, 2 Adapters, 2 Seals..
  • Dimensions ------- Hose Inlet: Approx. OD. 1.36" (34.5 mm), Hose Outlet: Approx. OD. 1.36" (34.5mm), Max Suction Lift: Approx. 10ft (3m), Max Discharge Head: 13ft (4m). Flow: 720GPH (2724 LPH).
  • Easy to use------fixed handle with rubber handle, easy to use. Installation can be done without complicated steps..
Check Stock

AMRJ-32903 Mayfair Cartridge Bilge Pump - 1000 GPH

  • Mayfair Cartridge Bilge Pumps make cleaning and maintenance easy! Cartridge Bilge Pumps can be removed for cleaning or replacement without the use of a single tool..
  • Lift a tab on the top, give the cartridge a twist, and pull it out.
  • that's all there is to it! Includes all-in-one motor/impeller unit with no loose parts. Feature a thermoplastic body, lip seal shaft seal and a stainless steel motor shaft..
  • 12V cartridge bilge pump with high impact housing. Easy installation and increased longevity. Corrosion, chemical and fuel resistant..
  • Permanent magnet motor along with permanent lubrication. T-Slot for easy float switch attachment.
  • 1000 GPH, 3/4" Outer diameter discharge port, 5 Amp Fuse Size. Picture shows the 1000 GPH pump..
Check Stock