Top Bilge Pump Float Switches

AMRJ-32503 Mayfair Cartridge Bilge Pump - 500 GPH

  • Mayfair Cartridge Bilge Pumps make cleaning and maintenance easy! Cartridge Bilge Pumps can be removed for cleaning or replacement without the use of a single tool..
  • Lift a tab on the top, give the cartridge a twist, and pull it out.
  • that's all there is to it! Includes all-in-one motor/impeller unit with no loose parts. Feature a thermoplastic body, lip seal shaft seal and a stainless steel motor shaft..
  • 12V cartridge bilge pump with high impact housing. Easy installation and increased longevity. Corrosion, chemical and fuel resistant..
  • Permanent magnet motor along with permanent lubrication. T-Slot for easy float switch attachment.
  • 500 GPH, 3/4" Outer diameter discharge port, 5 Amp Fuse Size. Picture shows the 1000 GPH pump..
Check Stock

creatorele DC 12V 24V 32V Automatic Boat Bilge Float Switch Bilge Switches Flow Sensor for Automatic Electric Water Pump

  • 【Bilge Float Switch】:Can be connected to various submersible pumps, bilge pumps,and water pumps .Shells made of high quality ABS material, the internal metal contacts to ensure reliable start / stop..
  • 【Use with pumps】:Turn pump on when water level reaches 2″(51mm).
  • Turn pump off when water level reaches 3/4″(19mm)..
  • 【Performance】:Long life, switching frequency up to 10 million times.
  • Ultrasonic welding, forming a seal, reliable and secure, not leaking..
  • 【Specification】:Max Amps 12volts: 20A / Max Amps 24volts: 10A / Max Amps 32volts: 8A.
  • 【Easy to Clean】:Ideal flow sensor for bilge pumps Latest design includes a removable base for easy cleaning and servicing..
Check Stock

Premium Bilge Cleaner Concentrate for Boats Marine Boat Cleaner Soap Grease Oil Fuel and More

  • POWERFUL CONCENTRATE CLEANS BILGE AND REMOVES ODORS: Our bilge cleaner is a powerful oil eater that emulsifies boat oil, grease and transmission fluid to keep your bilge clean and odor-free. Simply pour in bilge pumps for boats and our oil eater cleaner degreaser works for emulsifying and deodorizing the bilge tank and bilge hose. This bilge degreaser super cleaner bilge pump cleaner dissolves fuel, sludge, scum and transmission fuel to keep your bilge pump operating smoothly and efficiently!.
  • EMULSIFIES & ELIMINATES GREASE & OIL: This oil eater degreaser works as a super clean degreaser for the inside of your bilge! Bilge pump boat juice is an essential staple to your boat cleaning supplies kit to keep your sludge pump odor free and running properly. Our concentrated oil eater cleaner and degreaser maintains a proper working marine bilge pump and boat bilge pump without harming fiberglass, plastic or metal on your boat. Regular use keeps an automatic bilge pump running smoothly..
  • FAST & EASY TO USE: Simply pour in and run boat for at least one hour. The natural motion of the boat works to scrub the bilge. Then drain or pump out into a container that is in accordance with the law. Repeat process until no sludge remains. To maintain, repeat process once....
Check Stock

Sailortenx Manual Bilge Pump For Boats Kayak Bilge Pump Hand Kayak Water Pump Manual For Boats Bilge Pump Manual Portable Floating Hand Bilge Pump For Kayak Etc

  • [Sturdy Durable] Manual kayak bilge pump is made of plastic, compact and lightweight, very easy to carry. The portable bilge pump Kayak manual is used to evacuate water from inside your kayak or hatch to prevent capsizing or swamping..
  • [Emergency Tool] Just connect the manual marine bilge pump for boats hose to either end of the kayak water pump, so manual bilge pumps kayaks with one end deep in the bilge and ejecting this bilge water overboard..
  • [How To use] Insert the bottom of the boat bilge pump for kayak (or hose) into the water, and use the handle to start pumping. The kayak bilge hand pump sucks water in when you pull the handle out, and disperses the water when you push the handle in..
  • [Ergonomic Design] The ergonomically designed handle is very easy to grip, boat bilge pumps manual is gear shape desingn and features a filtered nozzle to prevent seaweed, leaves and debris from clogging the manual hand bilge pump for boat..
  • [Scene To Be Used] Manual kayaks hand bilge pumps for boating perfect for emergency water removal in small boats, kayaks, canoes or dinghies..
Check Stock

Amarine Made 12V 1100 GPH Auto Submersible Boat Bilge Water Pump with Float Switch 3/4 inch Outlet, Automatic All-in-one 3.2A Ignition Protected Marine Emergency Pump for Saltwater Freshwater

  • Head: 2.5M, Wire Lead: 1M, Outlet Dia: 28.5mm(1-1/8"), Dimension: 155*90*115mm.
  • ✔Built-in float switch:Compact, automatic, fully submersible electric pump,Built-in float switch! (No separate float switch is needed).
  • ✔Long life motor :Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
  • ✔Durable: All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing..
  • ✔No power use until pump is activated by internal float switch (when water level rises).Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning.
Check Stock

Ogrmar Automatic Boat Bilge Pump Float Switch Moisture Tight Seals 12/24/32VDC Ignition Protected Mercury

  • Compact efficient long life motors: Small volumn and portable bilge pump is made of long life motors .It can Improve work efficiency.
  • Exclusive Moisture Ting Seals: Bilge pump is made from heavy duty marine sealant and corrosion material Protection.
  • Cleanable Strainer: The pump base is used by high qulity easy clean snap lock strainers. the life-span of the bilge pump could be prolonged..
  • Easy to Install: Design common installation location and it can use with the bilge switch.
  • Wide Application : Bilge pump can be used in aquarium,fishing boats,fountain and other places to easily drain the water.
Check Stock

Zoeller 807-0001 Shark Model 807 1 HP 115V Residential Grinder Pump

  • Made of high quality material for longer service life..
  • an essential tool in life, a good helper in life..
  • the product is compact in size,small and portable, carry it with you..
  • Be widely used to draw water in yacht, fishing-boat, industry, etc.Fully automatic bilge pump, no separate float switch is needed..
  • Stainless Booster Water Pump/Electric Water Transfer Pump designed to transfer water from tanks, pools, rain barrels, and groundwater. Easy to set up and let it drain away from the accumulated water, ideal for both in-ground and above-ground pools..
Check Stock

Zoeller 803-0001 Shark Model 803 1/2 HP 115V Residential Grinder Pump

  • This high efficient fuel pump is an perfect equipment for quick and clean oil-changes..
  • It works great for pumping engine oil, crude oil and heating oil..
  • This process is very simple and you can often do it by yourself to ensure your engine runs smoothly..
  • Be widely used to draw water in yacht, fishing-boat, industry, etc.Fully automatic bilge pump, no separate float switch is needed..
  • Stainless Booster Water Pump/Electric Water Transfer Pump designed to transfer water from tanks, pools, rain barrels, and groundwater. Easy to set up and let it drain away from the accumulated water, ideal for both in-ground and above-ground pools..
Check Stock

Hand Bilge Pump Manual Hand Water Pump for Kayaks Canoes and Boats Emergency Hand-Operated Marine Bilge Pump with Reversible Hose

  • ⛵HAND BILGE PUMP FOR BOATS: Our manual bilge pump length is 17", and the maximum unfolded length is 28.3", which is easy to store and takes up minimal space. It’s the perfect boating accessory for kayaks, canoes, dinghys and small boats. Our bilge pump remove water quickly and downward strokes for maximum efficiency and less fatigue.
  • ⛵MAKES WATER REMOVAL EASIER & FASTER: Our hand water pump features a 34.6" long hose with a 1.16" intake nozzle and 1.37" diameter hose that makes reaching the bottom of your boat easier and removing excess water faster. This hand suction pump works great to remove water from the bottom of a motorboat, canoe or dinghy.
  • ⛵EASY TO USE: Just simply connect the hose to the end of the pump, insert the bottom of the pump into the water, and use the handle to start pumping. It sucks water when you push the handle in, and disperses the water when you pull the handle out!.
  • ⛵NO CLOG FILTER & ANTI-LEAK DESIGN GASKET: Our marine bilge pump Features a filtered nozzle to prevent seaweed, leaves and debris from clogging this hand water pump. And The premium rubber sea....
Check Stock

attwood Sahara MK2 800 GPH 12-Volt Automatic Bilge Pump

  • 800 GPH, 12V, Fuse size: 4A, Outlet type: 3/4" & 1" barbs, Check valve: yes, Wire length: 29 1/2".
  • The easiest, most reliable automatic bilge pump ever designed.
  • The only automatic bilge pump that eliminates air-locks, Patented X-Air Impeller ejects trapped air in the pump and pipework.
  • Flexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation.
  • Single-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat’s hull.
  • Universal Backwards Compatible Design: 7-pump mounting hole pattern for replacing any top bilge pump in its category.
  • SteadySwitch: Buoyancy control reduces cycling, draining the bilge not the battery.
  • No Pipe Or Hose Removal Required: Reduces the time that it takes to replace the cartridge.
  • Improved Motor Cooling/Heat Dissipation: Prevents overheating that may cause failures, such as blown fuse, leaking, etc..
  • Includes straight outlet and check valve.
Check Stock

DasMarine 1100GPH 12V 3.2 AMP 5.0 AMP Fuse 29mm ID Hose Electric Marine Submersible Bilge Sump Water Pump for Boat Yacht

  • hose barb discharge outlet:1-1/8 inch (29millimeter).
  • 2. Fully submersible electric pump.Small size, high efficiency, low current (low cost switching power supply supporting).
  • 3.Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies submersible bilge pumps are tough enough for any bilge.
  • 4.Snap lock strainer base for easy installation and removal.
  • 5.Silent and vibrationless operation. Stainless steel shaft, completely submersible, rust and corrosion protection, need a separate float switch.
Check Stock

Gearlab Deck Pod - Kayak Deck Bag, Paddling Magazine Award (Holds Paddle Float, Bilge Pump)

  • Sip and Paddle: Gearlab Deck Pod fits a hydration bladder up to 3L. The large tube opening and see through mesh pocket holding the bite valve, paddlers could drink water easily and paddle farther.(Paddle Float, Pump, Hydration Bladder NOT Included.).
  • Snag-Free: The external holders on both sides of the Gearlab Deck Pod are designed to hold bilge pump and paddle float, providing direct access to pull out and insert the safety equipment from cockpit..
  • Sleek & Streamlined: Low profile design reduces wind resistance and stays away from paddling strokes..
  • Quick Deck Release: Mounting and removing the Gearlab Deck Pod is quick and easy with quick release buckles..
  • Grab It Right: The carry handle is placed beneath the pod, not visible when the Gearlab Deck Pod is secured on the deck. The discreet design eliminates the confusion with spray skirt handle in emergency situations..
Check Stock