Top Black Exhaust Wrap Kit

Universal 4 Turbo Dual Smoker Diesel Exhaust Stack T Pipe System with 2Pcs 4 Inlet 8 Outlet Gloss Black Stainless Steel Miter Angle Cut Diesel Smoker Stack Tips

  • Universal 4" Turbo Dual Smoker Diesel Exhaust Stack T Pipe Kit + 4"Inlet 8"OutLet Cut Stack Tips Gross Black.
  • Designed For Chevy/Dodge/Ford Full Size Pickup Truck.
  • Smoke kits:T409 Stainless Steel & Coated Black.
  • Cut Exhaust Stack Tip：Inlet: 4" (101.6mm), Outlet: 8" (203.2mm), Total length: 36" (914.4mm) Gloss Black Finish.
  • Professional installation is highly recommended.
  • Package includes1 Set Smoke kit with 2 Cut Exhaust Stack Tip.
Check Stock

LucaSng Universal 5' Turbo Dual Smoker Diesel Exhaust Stack T Pipe System with 2Pcs 5' Inlet 8' Outlet Gloss Black Stainless Steel Miter Angle Cut Diesel Smoker Stack Tips

  • Universal 5" Turbo Dual Smoker Diesel Exhaust Stack T Pipe Kit + 5"Inlet 8"OutLet Cut Stack Tips Gross Black.
  • Designed For Chevy/Dodge/Ford Full Size Pickup Truck.
  • Smoke kits:T409 Stainless Steel & Coated Black.
  • Cut Exhaust Stack Tip：Inlet: 5" (127mm), Outlet: 8" (203.2mm), Total length: 36" (914.4mm) Gloss Black Finish.
  • Professional installation is highly recommended.
  • Package includes1 Set Smoke kit with 2 Cut Exhaust Stack Tip.
Check Stock

Cobra 2\ Diameter Chrome Heat Shield 99-0165P

  • 2"X50' Titanium exhaust wrap with (pack of 15)11.8" Stainless Steel(304) Locking Ties.0.08" thickness.
  • Before installing, soak the header heat wrap in water so that the fiberglass will not flying about. Wear gloves to avoid itching. Wrap it around your exhaust pipe, using overlap to hold it in place and simply use stainless ties to secure the ends in place..
  • High resistance to abrasions, oil spills, temperatures and vibration breakdown..
  • The exhaust heat wrap tape can withstand 1800F direct/2500F radiant heat..
  • Car heat shield wrap can reduces heat under hood up to 50% and improving car and motorcycle performance.
Check Stock

J-B Weld ExhaustWeld 2\ x 72\ Repair Wrap

  • J-B WELD EXHAUSTWELD: A high strength fiberglass wrap, impregnated with a specially formulated resin for high temperature resistant repairs. ExhaustWeld can resist up to 1100°F once it is fully cured!.
  • CURE AND SET TIME: ExhaustWeld can cure with or without heat! It will cure within 20 minutes if heat is applied to it with either a heat gun or by letting the engine run. Without heat, ExhaustWeld will set in 20 minutes and cure in 2 hours..
  • HIGH HEAT RESISTANCE: Once fully cured, J-B Weld ExhaustWeld Exhaust System Repair Wrap has a temperature resistance of 1100°F, allowing it to be used on every part of the exhaust system!.
  • APPLICATIONS: Manifolds, Catalytic Converters, Mufflers, Tailpipes and more!.
  • EVERYTHING YOU NEED: The kit includes a pair of gloves and a .5" x 24" piece of aluminum tape!.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

LucaSng Universal 4 Turbo Dual Smoker Diesel Exhaust Stack T Pipe System with 2Pcs 4 Inlet 7 Outlet Gloss Black Stainless Steel Miter Cut Diesel Smoker Stack Tips 5 ID Inlet 36 Long With Clamps

  • Universal 4" Turbo Dual Smoker Diesel Exhaust Stack T Pipe Kit + 4"Inlet 7"OutLet Cut Stack Tips Gross Black.
  • Smoke kits:T409 Stainless Steel & Coated Black.
  • Cut Exhaust Stack Tip：Inlet: 4" (101.6mm), Outlet: 7" (177.8mm), Total length: 36" (914.4mm) Gloss Black Finish.
  • Fitment: Universal,For Truck, Dodge, Chevy.
  • Installation should depend on the inside diameter and outside size.
  • Professional installation is highly recommended.
  • Package includes1 Set Smoke kit with 2 Cut Exhaust Stack Tips.
Check Stock

LEDAUT 2"x 100'Titanium Exhaust Heat Wrap For Car & Motorcycle Exhaust Tape With Stainless Ties

  • 2"X 100' titanium exhaust wrap with 16 x 11.8" stainless steel(304) locking ties..
  • Before installing, soak the header heat wrap in water so that the fiberglass will not flying about. Wear gloves to avoid itching. Wrap it around your exhaust pipe, using overlap to hold it in place and simply use stainless ties to secure the ends in place..
  • Heat shield are highly resist to abrasions, oil spills, temperatures and vibration breakdown..
  • The exhaust heat wrap tape can withstand 1800F direct/2500F radiant heat..
  • The thermal heat wrap reduces heat under hood up to 50% and improve car and motorcycle performance.
Check Stock

Stark Thermal Wrap 1\ Wide x 50' Long - Fiberglass Heat Shield Exhaust Manifold/Header Wrap - Yellow

  • Reduce up to 90% Radiant Heat - helps shield fuel lines, brake lines, wire looms and more from radiant heat.
  • Rated for 1350°F continuous, 2000°F intermittent. Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this exhaust header wrap.
  • Fiberglass exhaust header wrap can create more horsepower and reduce under hood temperatures.
  • 1/16" x 1" x 50' Roll fiberglass exhaust heat wrap wiht 11-3/4" stainless ties (pack of 5).
  • Special weave makes it easier to wrap around bends, and gives carbon fiber look..
Check Stock

Stark Thermal Wrap 2\ Wide x 50' Long - Fiberglass Heat Shield Exhaust Manifold/Header Wrap - Yellow

  • Reduce up to 90% Radiant Heat - helps shield fuel lines, brake lines, wire looms and more from radiant heat.
  • Rated for 1350°F continuous, 2000°F intermittent. Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this exhaust header wrap.
  • Fiberglass exhaust header wrap can create more horsepower and reduce under hood temperatures.
  • 1/16" x 2" x 50' Roll fiberglass exhaust heat wrap wiht 11-3/4" stainless ties (pack of 5).
  • Special weave makes it easier to wrap around bends, and gives carbon fiber look..
Check Stock

Design Engineering 010095 Titanium Exhaust Heat Wrap Kit with LR Technology 2 2 x 50 Rolls 12 Locking Ties and Locking Tie Tool

  • Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability.
  • Withstands 1800 degrees Fahrenheit direct heat and 2500-degree intermittent heat.
  • Promotes increased flow for improved performance.
  • reduces temperature & vibration breakdown.
  • Extremely pliable for a tight and secure wrap.
  • Kit includes all you need for any set of V8 headers: two 2" x 50' rolls of Exhaust Wrap, eight 8" and four 4" stainless steel Locking Ties, and....
Check Stock

LEDAUT 2\x 50' Twill Weave Motorcycle ATV Titanium Exhaust Heat Shield Wrap with 11.8\ Locking Ties (Pack of 15)

  • Reduce up to 90% Radiant Heat - helps shield fuel lines, brake lines, wire looms and more from radiant heat.
  • Rated for 1350°F continuous, 2000°F intermittent. Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this exhaust header wrap.
  • Fiberglass exhaust header wrap can create more horsepower and reduce under hood temperatures.
  • 1/16" x 1" x 50' Roll fiberglass exhaust heat wrap wiht 11-3/4" stainless ties (pack of 5).
  • Special weave makes it easier to wrap around bends, and gives carbon fiber look..
Check Stock

DEGEOBERLIN 2 x 17 Feet Exhaust Header Wrap Motorcycle Exhaust Tape Thermal Protection Kit with 4pcs 8Inch Stainless Steel Locking Ties

  • 2 inch wide and 17 feet long titanium exhaust wrap with (pack of 4)8" Stainless Steel(304) Locking Ties..
  • The exhaust heat wrap tape can withstand 1800F direct/2500F radiant heat.Thermal heat wrap reduces heat under hood up to 50%.Make your motorcycle cooler in summer.
  • Basalt refractory superior to cheap aftermarket colored fiberglass tape . Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability.
  • Heat shield protects drivers and mechanics from burns and improve car And motorcycle performance..
  • Before installing, soak the header heat wrap in water so that the fiberglass will not flying about. Wear gloves to avoid itching. Wrap it around your exhaust pipe, using overlap to hold it in place and simply use stainless ties to secure the ends in place..
Check Stock

Design Engineering 010330 Motorcycle Exhaust Pipe Wrap Kit with Hi-Temp Silicone Coating Spray - Black Wrap / Black Spray

  • A simple and effective way to control heat, protect against serious leg burns and improve performance.
  • Improve exhaust flow for better performance and increase horsepower.
  • Withstands direct continuous heat up to 1200 degrees Fahrenheit.
  • Prevents burns and protects against abrasions, hot oil spills, road grime and more.
  • Kit includes two rolls of 2" x 15 ft exhaust wrap, 1 can of Hi-Temp silicone coating spray, eight 8" stainless steel locking ties, and four 14"....
Check Stock