Top Dual Exhaust Tailpipe Kit

IFOKA 2.5 Inch Inlet Exhaust Tip , 2.5' Inlet x 3' Outlet 6 Inch Long Diesel Exhaust Tips, Stainless Steel Polished Finish Exhaust Tailpipe Extension, Clamp-on Design

  • Dimension: Exhaust tips 2.5 inch inlet, 3 inch outlet, 6 inches overall length. Note: Fits tailpipe with 2.5 inches outlet diameter only, please measure the outlet diameter of your pipe before purchase.
  • Material: Stainless steel with mirror polished surface treatment, anti-corrosive, high temperature resistance, and not easy to scratch & fall off. Prevent the original exhaust tailpipe from sun and rain..
  • Easy to install: Cleaning tailpipe and exhaust tips, unscrew the bolt but not remove it, slide the tip into place on the tailpipe, move the clamp to a place flush with the entry port, then tighten the screw and clamps..
  • Unique Driving Pleasure: Rolled edge and angled cut design, and elegant chrome can perfectly decorate your vehicle. Thicker inner waller design makes the vehicle sounds rumble and crackle, give you the unique driving pleasure..
  • Rustproof Design: There is a drainage hole on the bottom of the exhaust tips, not easy to accumulate water and avoid rust effectively. In order to prolong the service life of the product, clean up once a month..
Check Stock

Dsycar Universal 1.5-2.25 Inch Adjustable Inlet Exhaust Tips, Bolt-On Design Chrome Plated Stainless Steel Exhaust Tailpipe Tips (Silver Curved )

  • 【 Note 1 】Only fit 1.5’’-2.25’’ inlet pipes, please measure the outlet diameter of your pipe prior before purchase this exhaust tip. ( For all tailpipes, if the outlet size is 1.5 - 2.25 inch, then this exhaust tip can fit, no matter of your Year/Make/Model).
  • 【 Note 2 】Please check your original tailpipe's type. Straight tailpipe is for straight type, and curved tailpipe is for curved type. This one is suitable for curved exhaust pipes. (Pay attention: This exhaust tip is oval outlet, not round outlet).
  • 【 Note 3 】View product details with image,Understand the installation and size of the product, can view the other seven exhaust pipe products,Choose the right product size and your favorite color..
  • 【Easy to Install】 There is no need to replace any parts,No weld needed. No drill needed.Super Easy to Install! Three Bolt Fit the tip to your Pipe..
  • 【Car Decoration】Surface polishing process. More Car decoration can search Dsycar. Tips again, please measure your exhaust pipe diameter to make sure our products fit your vehicle..
Check Stock

Exhaust Tip 2.5 Inlet 6 Outlet 8 Long Black Coated inish Muffler Tip for Truck Tailpipe Stainless Steel Rolled Edge 2.5 inch for A6 Black Coating 2 Pair

  • 2.5" ID EXHAUST TIP: 2.5" inlet diameter 6" outlet diameter 8" overall length, universal fits 2.5" outer diameter tailpipe..
  • MATERIAL: Made of stainless steel to protect the existing tailpipe from corrosion and deformation. Black coating prevents rain erosion..
  • APPEARANCE: The pure and elegant black exterior can perfectly decorate your vehicle..
  • EASY TO INSTALLATION:welding is required for installation,perfectly decorate the exhaust pipe of your car..
  • NOTE: Only Fits 2.5 Inch Outside Tailpipe. Please check the size of your vehicles tailpipe before purchasing..
Check Stock

Milwaukee 48-38-0010 Cutter Wheel 2-Pack Sold as 4 Pack

  • CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe or tailpipe with our pipe cutters.
  • EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
  • EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw....
  • NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
  • Work in cramped spaces with one-handed....
  • BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
  • The head of the exhaust cutting tool won’t bend from....
Check Stock

Exhaust Tip 3 inch Inlet, MONOKING 3 inch Exhaust Tip Stainless Steel Black Tailpipe for Truck Cars 3' Inlet 4' Outlet 12' Long Bolt On

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • BOLT ON INSTALL – Holds up long time! Direct Bolt-on, it takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and tighten screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and arrive within 2-3 days.
Check Stock

4 inch Inlet Diesel Truck Tailtip, 8 inch Outlet Exhaust Tip, 15 inch Length Muffler Tip, Rolled End Angle Cut

  • Dimension: standard 4" x 8" x 15"(inlet, outlet and overall length).
  • ONLY universal fit for vehicles with 4-inch outside diameter exhaust pipes (Notice: Please make sure the Outside Diameter of your vehicle tailpipe outlet is 4.0" before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the chrome-plated and polished finish would make your car tailpipe shine brightly.
  • Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M8 Allen Key, no drilling or welding needed.
  • Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

3 inch Exhaust Tip, MONOKING Black Exhaust Tip 3 inch Inlet Stainless Steel Clamp On Tailpipes for Truck Car 3″ Inlet 4″ Outlet 12″ Long

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • CLAMP ON INSTALL – Holds up long time! Well thought out clamping mounting. It takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and clamps down tightly by tightening screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and....
Check Stock

Dual Outlet Exhaust Tip 2.5" Inlet, A-KARCK Polished Double Wall Tailpipe Tip 2.5" Inlet Dual 4" Outlet 9.5" Long, Angle Cut Design

  • DIMENSION: 2.5 inch inlet to 4 inch outlet, 9.5 inch overall length. Universal fits 2.5 inch outer diameter tailpipe..
  • UPGRADE APPEARANCE: Dual outlet with angle cut design, endowing the vehicle with high-end quality..
  • DUAL WALL DESIGN: Double wall design, which is durable and wear-resistant. After polishing treatment, will effectively drain water and prevent rust..
  • HIGH-QUALITY MATERIAL: Made of corrosion-resistant stainless steel to protect the existing tailpipe from the sun and rain, and avoids rust and deformation..
  • WELD ON INSTALLATION: Welding design ensures long-term use. Prevents the exhaust tip from falling during off-road or city cruises..
Check Stock

Autarboor Exhaust Tip 3 Inch Inlet, 3' Inlet 4' Outlet 12' Long Mirror Polish Stainless Steel Bolt-On Exhaust Tailpipe Tip Slant Cut, Rolled Edge

  • 【Dimension】 Standard with 3 inch Inlet, 4 inch outlet, 12 inch overall length, bolt-on exhaust tips. Universally applicable to vehicles with 3 inch outer diameter of exhaust pipe..
  • 【Special Design】With elaborately mirror polished to keep your vehicle look cool style and new shiny look instead of the rusted old tailpipe. Slant cut design can drain your exhaust tailpipe timely.
  • 【High-grade Material】Made of high quality material stainless steel, strong anti-corrosive, durable exhaust tip, can greatly protect your original pipe from the sun and rain, avoid rusting and deformation.
  • 【Easy installation】Bolt-On exhaust tip don’t require welding or drilling operations, just simply slide the exhaust tip into the exhaust pipe and tighten it with a wrench.
  • 【Warranty】12 months warranty: Feel free to contact our customer service if you have any problem with our product.
Check Stock

Dsycar Universal Stainless Steel 1.5 - 2.25 Inlet Exhaust Tip - Fit Pipes Diameter 1.5 - 2.25 inch Adjustable Car Decoration Chrome-Plated Finish Exhaust Tailpipe Tip 3.3 Outlet 5.4 Long

  • 【 Measure Your Tailpipe Diameter】Please measure the outside diameter of your exhaust pipe before purchase, otherwise our product will not fit your....
  • 【 Note 2 】Please check your original tailpipe's type. Straight tailpipe is for straight type, and curved tailpipe is for curved type..
  • 【 Note 3 】View product details image,Understand the installation and size of the product, can view the other seven exhaust pipe products,Choose....
  • 【Easy to Install】 There is no need to replace any parts,No weld needed. No drill needed.Super Easy to Install! Three Bolt Fit the tip to your....
  • 【Car Decoration】Surface polishing process. The most important thing for us is that you 100% love your purchase. Tips again, please measure your....
Check Stock

FLBETYY 38-51mm Universal Black Motorcycle Dual-outlet Exhaust Tail Pipe Muffler Fits Yamaha YZF-R6 Kawasaki Z1000 Suzuki GSX-R

  • 【HIGH QUALITY】: Made of high quality stainless steel, durable, corrosion resistant, rust proof..
  • 【SOUND】: Sounds amazing, nice growl, loud without being too annoying.
  • 【STYLISH DESIGN】: Designed to push exhaust gases downwards away from vehicle..
  • 【APPLICATION】: Suitable for most motorcycles with a diameter of 51mm / 2 inches, such as for Yamaha YZF-R6 / for Suzuki GSX-R GSX-S1000 / for BMW....
  • 【DUAL-AIR-OUT】: The motorcycle muffler tailpipe with dual-outlet exhaust pipe design, reducing overall weight for top performance to obtain max....
Check Stock

Stainless Steel Car Exhaust Tip, 5.5″ Universal Exhaust Pipe, Modification Tail Throat Tail Pipe, Steel Exhaust Tips Chrome Plated Finish Tailpipe, Replacement Accessory for All Cars (Blue/Bend)

  • 【High Quality】: This exhaust pipe is made of high quality stainless steel with a smooth and hard surface, does not deform easily. Compared with other pipes which is prone to rust, this one can use for a long time. The tailpipe is designed with rounded and smooth edges, which is not easy to scratch when installed. The edges are thick and curved, and the appearance is sleek and fresh, making your car look more luxurious..
  • 【Stylish Decoration】: This car exhaust tip has a stylish design and is not only exquisitely made, but also has a polished and baked blue surface with attractive colors in the sunlight. It is a perfect vehicle decoration. It adds a personal touch to your car, making it even more unique compared to other cars. It also protects your exhaust pipes from rain and dust..
  • 【Protect Your Exhaust Tip】: This product is installed to prevent deformation and oxidation of the exhaust pipe. Each of our stainless steel chrome muffler tip has a small drain hole at the bottom of the tip to prevent water buildup. And it is a nice sound modifier. This tip is very easy to install, built of high quality material, and looks cool with long service life..
  • 【Easy to Install】: The installation is easy for you. Using the screw connection method, loosen....
Check Stock