Top Blade Mcpx Battery Connector
1S LiPo Battery USB Charger 3.7V/4.20V 6 Channel 1S LiPo Charger Tiny Whoop Blade Inductrix Micro JST 1.25 JST-PH 2.0 mCX mCPX Connectors
- Support 0.2A/0.6A charge current by switch button ( Suggest using 0.2A if you charge six at the same time and 0.6A if you only do 2).
- USB interface input suggested range: 5V±5% on 0.5-2.4A, suggested 2.4A or above.
- Charger plug: Micro 1.25 and JST-PH 2.0, AKA mCX and mCPX, Charging max 6 batteries at the same time. ( Need to consider width of battery).
- The 6 LED lights indicate the charging state of the six channels independently, LED solid indicates charging, LED off indicates full charged..
Check StockUpgrade 1S LiPo Battery USB 3.8V/4.35V Charger 6 Channel 1S LiHV Charger for EMAX Tinyhawk Blade Inductrix Tiny Whoop Inductrix FPV Plus Battery Micro JST 1.25 JST-PH 2.0 mCX mCPX Connectors
- ONLY support LiHV 3.8V/4.35V 1S battery, not for 3.7V/4.20V 1S LiPo battery.
- Support 0.2A/0.6A charge current by switch button ( Suggest using 0.2A if you charge six at the same time and 0.6A if you only do 2).
- USB interface input suggested range: 5V±5% on 0.5-2.4A, suggested 2.4A or above.
- Charger plug: Micro 1.25 and JST-PH 2.0, AKA mCX and mCPX, Charging max 6 batteries at the same time. ( Need to consider width of battery).
- The 6 LED lights indicate the charging state of the six channels independently, LED solid indicates charging, LED off indicates full charged..
Check StockDPI 36volt 18 Amp Golf Cart Battery Charger with Crowfoot Connector
- 36Vdc 18Adc Output, 120Vac 60 Hz Input MADE IN USA!.
- Fully Automatic, 5 stage golf cart battery charger.
- 9ft Length Input and Output cords, UL Listed, BC Rated.
- Reverse Battery Protection, charges most lead-acid batteries.
Check Stock4pcs 520mAh 1S LiPo Battery 80C HV 3.8v LiHV Battery JST-PH2.0 Connector Upgraded for Inductrix FPV Racing Drone Like EMAX Tinyhawk 2 etc
- Updated 1S HV 660mAh battery is the great choice of Tiny Whoop Blade inductrix with the connector plug of JST-PH2.0 PowerWhoop connector.
- C-rate up to 90c burst 180c better than other 80C lipo battery, compact size of 61 * 18 * 7 mm, many charges on these with no sagging.
- The weight of the 660mAh 1S Lipo battery only 81g, it is 81g lighter than the 450mAh 1s lipo battery, but better performance than it.
- This was a huge upgrade from the EMAX 450mah 1S batteries, your flight time can upwards of 5 mins on these batteries compared to a previous max of 2 mins.
- Fit for EMAX Tinyhawk series, like TinyHawk 2, EZ Pilot, TinyHawk S. Also work with other 1S micro FPV racing drone.
Check StockBETAFPV 8pcs 300mAh 1S Lipo Battery 4.35V LiHV 30C/60C Continuous Discharge with PH2.0 Connector Compatible for 1S RC Racing FPV Whoop Drone Quadcopter with PH2.0 Connector
- The upgrade version 1S 300mAh battery is the great choice of Tiny Whoop Blade inductrix with the connector plug of JST-PH2.0 PowerWhoop connector..
- Compared with 260mAh battery, you can get a longer flight time of 5’10” and more power if you use it on Beta65s BNF..
- This BETAFPV 1S 300mAh battery’s weight is 7.7g with the larger capacity of 30C..
- Newly developed chemistry 1S Battery, longer flight time and safer charging situation. Safer, higher quality and more powerful rate brings you higher speed flying experience..
- Please Note: As a FPV battery, Don’t over-charge, or over-discharge batteries. Don’t put it beside the high temperature condition. Don’t throw it into fire. Don’t throw it into water..
Check StockECO-WORTHY 1400W 24V Solar Wind Generator Kit for Home/Farm/Shed: 1pc 400W Wind Turbine +10pcs 100W Solar Panels +1pc 3500W 24V Inverter + 2pcs 100AH 24V Lithium Batteries +1pc 6 String Combiner Box
- ...built-in Battery Management System (BMS) that can protect it from overcharging, deep discharge, overload, overheating and short circuit. Can be used in parallel, more suitable for 24V solar panel kit, less wires, less heat loss and less balance issue..
- [Package Includes]:1* 400W Wind Turbine + 1* 29ft Wind Turbine Connector Cable + 10* 100 Mono Solar Panels + 6* Solar Cables + 10* Z Brackets + 1* Controller Connector Cable + 1* 6 String PV Combiner Box + 1* 3500W 24V Inverter + 2* 24V 100AH litium batteries + 2* Battery Connector Cables. Every accessories needed with 1 year warranty..
Check StockNOCO GC014 X-Connect XL Battery Clamp Accessory with Integrated M10 Eyelets Genius Battery Chargers
- Dual purpose battery clamp accessory with integrated M10 eyelet terminal connectors..
- Needle-nose battery clamp to fit battery terminals of any shape or size..
- Built-in 20A micro-blade fuse for increased safety and protection..
- Rugged, watertight connector for maximum performance..
- Compatible with G750, G1100, G3500, G7200 and G4 models, as well as, GENIUS1, GENIUS2, GENIUS2X2, GENIUS2X4, GENIUS5, and GENIUS10. Not compatible....
Check StockSolsop Network Cable Tester RJ45 Crimp Tool Kit CAT5 CAT5e CAT6 Crimping Tool Kit, 50PCS RJ45 CAT6 Connector Plug Modular Crimp Crimper for RJ11/RJ12 6P 8P Modular Standard and RJ45 Connectors
- Fast, Reliable Modular Crimp-Fast, Reliable Modular Crimp-connector Install Tool for voice and data applications & 6P 8P RJ45 connector plugs, and Crimps 6 and 8 position modular connectors (RJ11/RJ12 standard and RJ45 CAT5 CAT5e, CAT6 connectors).
- Cable Tester & Replaceable Blade - Network Cable Tester for cables with RJ45/RJ11/RJ12 Connector (9V battery not included), textured handle grips reduce hand fatigue and prevent slipping during cutting, stripping and crimping.
- Precision Crimp Die and Direct lateral crimp action provides more even, precise contact termination across all pins.
- Wire stripper, crimper, and cutter all-in-one tool for paired-conductor data cables.
- The blades are made of high quality steel blade, sharp, durable and replaceable which maintains razor sharpness.
- All-in-one design and Compact, ergonomic design for natural, single-hand operation.
Check StockNOCO GC001 X-Connect Battery Clamp Accessory with Integrated M6 Eyelets for NOCO Genius Smart Battery Chargers
- Dual-purpose battery clamp accessory with integrated M6 eyelet terminal connectors..
- Needle-nose battery clamp to fit battery terminals of any shape or size..
- Built-in 20A micro-blade fuse for increased safety and protection..
- Rugged, watertight connector for maximum performance..
- Compatible with G750, G1100, G3500, G7200, and G4 models, as well as GENIUS1, GENIUS2, GENIUS2X2 GENIUS2X4, GENIUS5, and GENIUS10. Not compatible with NOCO Boost or Boost X UltraSafe Lithium Jump Starters..
Check StockLightsaber - Light Sabers For Adults Dueling Lightsaber Rgb 15 Colors Rechargeable 2-In-1 Fx Double Bladed Legacy Lightsaber For Halloween Cosplay,Birthday Christmas Party Gift Real Lightsaber Toy
- 【Upgraded 2-in-1 Light Sabers】2 pack of metal hilt light sabers that can be used alone or connected to a longer double-bladed lightsaber【Upgraded 2-in-1 Light Sabers】2 pack of metal hilt light sabers that can be used alone or connected to a longer double-bladed lightsaber with the connector.Very cool. Both adults and children like it very much. with the connector.Very cool. Both adults and children like it very much.Colors Changeable.
- 【Lightsabers For Kids】Newly upgraded grip vibration, longer blade, combined with special battle sound and light flash mode.After holding the switch to turn on the RGB Light, click the switch to switch the color, double-click the switch to switch to the flash mode, three-click switch to switch to silent mode, Make you feel more interesting..
- 【15 Colors and 3 Modes】The lightsaber toy is available in 15 colors and 3 sound modes, the colors can be switched at any time and the sound can be turned off. The light saber sword has a real blaster sound, super sensitive, louder and brighter. When you double click to power button to activate, Let you cross into the real movie..
- 【Dueling Experience】The blade of the light saber is made of high-quality thickened polycarbonate, and the handle is composed of aluminum al....
Check StockTop Post Battery Terminals End for Marine Car Boat RV Vehicles Negative and Positive Post 2PCS
- Function: This battery terminal is used as a connector to increase the efficiency and reduce corrosion..
- Size: The battery terminal ends have a 3/8’’ lugs mounting with a 5/16’’ diameter short bolt..
- Fitment: The terminal ends can be used on car, vehicle, RV and boats. They can also be used on the devices which has 19mm tapering positive & 17mm tapering negative..
- Material: The battery ends are made of zinc alloy, which is totally rust and corrosion resistant..
- Warranty: We offer one year warranty for the blade switch. If you are not satisfied with it, simply contact us and get your refund..
Check StockLAMPVPATH (Pack of 5) I-Type 9V Battery Connector, 9 Volt Battery Clip, 9V Battery Clip Connector with Wire and Hard Buckle Plastic Housing
- Package: Includes 5 pcs I TYPE 9v battery connector.
- All these 9 volt battery connectors are with bare leads, all these 9 volt battery clip are with hard buckle plastic housing, no 9V battery is included in the package..
- Good Material of 9v battery clip: Very Hard Plastic ABS and Metal to make the sturdy house for 9v battery snap connector.(Means these 9v battery clip connector is designed not easy to pull apart when removing from the battery, they have longer life than other 9v snap connector that are just fixed on soft material).
- Size of 9 volt battery clips with wires( Each ): 2.4 x 1.2 x 0.7cm/0.94" x 0.47" x 0.28" with wire length approx. 15 cm/ 5.9 inches.
- Connection wires color of 9v connector: black and red..
- Function: These 9 volt battery connectors with clips are easy replace a broken battery connector on your electronic device, making removable power connections in home projects, they should be part of any experimenter or maker's kit..
- Attention: All these 9 volt battery clip connector are only suitable for 9v battery and 9v battery holders, please make sure this when buying this item, please do not apply them when your hands are wet..
Check Stock