Top Boring Bar For Power Cutting

ASZLBYM 5/8'' x 7'' Carbide Indexable Boring Bar Turning Tool Holder S16Q-MCLNR12 with 10pcs CNMG431 / CNMG120404 Indexable Carbide Turning Inserts

  • ★S16Q-MCLNR12 boring bar : material is alloy steel, shank Diameter 5/8'' , overall Length 7'' ,cutting direction：right hand..
  • ★CNMG431 turning insert : material is carbide, coating is TIN, can be used to process stainless steel, cast iron, steel parts..
  • ★The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
  • ★Package : 1pc S16Q-MCLNR12 boring bar + 10pcs CNMG431 carbide insert + 1pcs wrench.
Check Stock

ASZLBYM 5/8'' x 7'' Carbide Indexable Boring Bar Turning Tool Holder S16Q-MTJNR16 with 10pcs TNMG331 / TNMG160404 Indexable Carbide Turning Inserts

  • ★S16Q-MTJLNR16 boring bar : material is alloy steel, shank Diameter 5/8'' , overall Length 7'' ,cutting direction：right hand..
  • ★TNMG331 turning insert : material is carbide, coating is TIN, can be used to process stainless steel, cast iron, steel parts..
  • ★The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
  • ★Package : 1pc S16Q-MTJLNR16 boring bar + 10pcs TNMG331 carbide insert + 2pcs wrench.
Check Stock

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

  • ...he turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
  • Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Check Stock

Auliuakz Boring Bar Set,9pcs HSS Material 1/2 inches Round Shank Boring Bar Set Machine Tool Accessories

  • Boring Bar Set:Made of high quality HSS material, high hardness, wear resistance and heat resistance..
  • Boring Bar Set:9 kinds of boring bar of different lengths to meet your different needs..
  • Boring Bar Set:Boring bar can be used on boring machine, lathe or milling machine..
  • Boring Bar Set:Excellent workmanship to ensure high accuracy..
  • Boring Bar Set:The handle of boring bar is thicker, more durable..
Check Stock

TJATSE 1/2\ Round Shank Boring Bar Set Premium Indexable Carbide Inserts with Boring Bars CNC Turning Lathe Tool Set for Metal Lathe - 4 Pieces/Set

  • 【Industrial Quality Boring Bar Set】: TJATSE Boring Bar Set are made of Chilled Steel bar holders combine with Tin-coated carbide inserts, sturdy and durable for long time use. Great for semi-finishing on the existing hole cutter, fit boring machine, lathe machine..
  • 【Round Shanks Bar Holder】: Designed with round shank holders which allow the operator to set positve or negative rake, chip breaker eliminates long stringer chips. Positive rake 90-degree lead. Supplied with wrench..
  • 【Indexable Inserts Included】: Come with TCMT21.51 inserts and it can be indexed, when it is dull use another sided, a new cutting edge may be presented by simply indexing the insert. It is versatile and economical..
  • 【Easy Organization And Storage】: Easy reference guide for insert number, screw and other accessories is printed on the tool shank, and The entire turning tool set is contained in a alumium carrying case that protects and organizes each tool and stacks and stores easily..
  • 【TJATSE BRAND WARRANTY】: TJATSE provides an one-year no questions asked replacement warranty and friendly customer service. We aim to provide solutions for industry through both our products and professional service..
Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • ...he turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
  • Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Check Stock

Accusize Industrial Tools 3/8'' by 4.33'' Right-Hand Sclcr Coolant Through Indexable Boring Bar with Ccmt Insert 21.51, 2800-0035

  • General purpose boring bar fitted with rhomboidal positive inserts (80°angle) which are free cutting with strong cutting edges..
  • The coolant hole with a diameter range varying between 3/32" and 5/32" in accordance to the bar size allows to cool the cutting edge and remove chips..
  • The inserts is set with a 0° rake angle and an inclination angle shown in the table below..
  • Made of tool steel with nitrogen superficial treatment, Hardness 60 HRC, blackening by PVD coating, thickness 0.0002"..
  • Extreme gloss finish, Bar hardness approximately 45HRC.
Check Stock

OSCARBIDE 1/2'' x 7''Indexable Boring Bar,Right-Hand Sclcr Boring Bar with Carbide Insert CCMT09T304(CCMT32.5),1 Piece

  • Sclcr Boring Bar 1/2" Shank Diameter, Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.
Check Stock

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

  • ...he turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
  • Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Check Stock

OSCARBIDE Indexable Boring Bar 3/4 x 10 Overall Length,Right-Hand Sclcr Boring Bar S12S-SCLCR3 with CCMT09T304 CCMT32.5 ,1 Piece

  • Sclcr Boring Bar 3/4" Shank Diameter, Overall Length 10”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.
Check Stock

ASZLBYM S06K/S07K/S08K/S10K/S12M-SCLCR06 Lathe Indexable Internal Boring Bar Set Lathe Turning Tools Holder Set with CCMT21.51/CCMT060204 Carbide Indexable Boring Turning Inserts + 5pcs T8 Wrench

  • ♥PACKAGE INCLUDES : 5pcs lathe turning tools (S12M-SCLCR06 + S10K-SCLCR06 + S08K-SCLCR06 + S07K-SCLCR06 + S06K-SCLCR06 )+ 5PCS CCMT21.51( = ISO CCMT060204 ) carbide inserts + 5PCS T8 wrench , Comes with individual package, packed in Plastic box with Size mark on the box..
  • ♥5PCS BORING BAR : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining..
  • ♥Lead cutting angle: 95 Degree, cutting direction: right hand, turning insert: CCMT21.51( = ISO CCMT060204 ), clear mark on the wrench, easy to identify bar holder..
  • ♥ 5PCS CCMT21.51 INDEXABLE INSERTS : inserts are made of carbide and the coating material is Multilayer ,the Inserts can be used for finishing or semi-finishing stainless steel and cast iron..
  • ♥ADVANTAGE : the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability .If you need more CCMT21.51/CCMT060204,you can search for ASIN: B09495PCR6.
Check Stock

7PCS Carbide Turning Inserts Lathe Threading Tool Set, 12mm Mini Indexable Shank Lathe Drill Bar Turning Tool with Carbide Inserts for Finishing Operations

  • High-Quality Materials: Made of durable high-quality alloy steel materials with hardened and sharp carbide blades for effective processing..
  • Durability and Sharpness: Tungsten carbide blades are tinned to provide long life and sharpness, and have a higher temperature than ordinary steel tools. The turning tool holder is made of high-quality steel and plated with nickel, which has durability, moisture resistance, rust resistance and corrosion resistance..
  • Excellent Cutting Performance: Each tool holder has a cemented carbide insert with a positive cutting angle and a built-in chip breaker, which is very suitable for general cutting operations..
  • Usage Scenarios: It is used for turning inner holes, reaming, boring, etc. Used for semi-finishing machining on the basis of existing holes on boring machines or lathes..
  • Product Packaging: Including Shank Lathe Drill Bar Turning Tool model S12M-SCLCR06 / SER1212H16 / SCL1212H06 / MGEHR1212-2 / SNR0012M11 / SDNCN1212H07 / SDJCR1212H07.
Check Stock