Top Brake Blade

Grizzly Industrial G0701-19 5 HP Ultimate Bandsaw

  • Blade tension indicator quick change blade release/tensioning with blade tracking window.
  • Deluxe cast iron fence with extruded aluminum re-saw fence w.
  • Deluxe cast iron fence with extruded aluminum re-saw fence with precision-ground cast iron table.
  • Fence adjusts for blade lead includes scale magnifying window and 1-Inch blade.
  • Micro adjusting rack and pinion table tilt and height scale measurement.
  • Miter gauge foot brake stop rack and pinion upper guide adjustment and 4-Inch dust port x 2.
Check Stock

Klein Tools Tape Measure, 25-Foot Single-Hook

  • Tape Measure with 13-Foot standout of wide, tough and durable blade.
  • Uncluttered, easy-to-read bold lines marked on blade every 1/8-Inch.
  • Heavy-duty, tough, durable nylon-coating protects blade printing and delivers longer blade life.
  • Retraction speed brake controls blade speed and protects fingers from touching blade.
  • The impact resistant housing is over-molded with a soft touch finish for excellent grip and stands up to jobsite demands.
  • Single hook attaches easily to studs, conduit, pipes, etc..
  • Metal belt-clip securely holds tape measure to belts, pockets, or pouches.
Check Stock

KAKA Industrial BP-1650,50-Inch 16Gauge Box and Pan Sheet Metal Brake

  • Lift gate service will have extra charges and can be requested for you at a discounted rate, please send us a message stating you need the service. A valid phone number is REQUIRED. The carrier will contact you one day before the delivery, please provide a valid phone number..
  • VERSATILITY PAN BOX BRKAE. With fingers installed, this high quality brake can be used as a full-length nose bar, turning the machine into a straight bending brake.
  • EASY OPERATING BRAKE. Sectioned fingers are easily removed for box bending and special forming operations. Stop rod is designed for repeatable bending.
  • HIGH FLEXIBILITY BRAKE. This 50-Inch box and pan brake has 16 assorted size section fingers which allows producing many sizes of boxed and pans. when bending at full capacity, the counterweight apron lift assist facilitates the process with little effort.
  • BRAOD APPLICATION. Thickness adjustment can be achieve merely via adjusting blade gap. This solid build sheet metal pan box brake incorporates all the features of our standard hand brakes but with greater range of applications.
Check Stock

Ryobi RTS10 10\ Table Saw Replacement Rip Fence Assembly # 089037007706

  • Revolutionary SawStop protection: Standard brake cartridge stops the spinning blade on contact with skin reducing the chances of a catastrophic injury.
  • Compatible with all standard 10″ blades. Replaces TSBC-10R2 (equivalent to TSBC-10R2). Not compatible with CB Model Saws (CB Model Saws use TSBC-10L).
  • Compatible with all woods and other non-conductive materials.
  • 1 locking key allows the user to quickly and easily switch between the standard brake cartridge and dado brake cartridge when making standard or dado cuts.
Check Stock

Klein Tools 86225 Tape Measure, 25-Foot Double Hook Magnetic with Finger Brake, Easy to Read Bold Lines

  • Uncluttered, easy-to-read bold lines marked on blade every 1/8-Inch.
  • Dual angle magnetic hooks attach to conduit and steel studs.
  • Heavy-duty nylon-coating protects blade printing.
  • Retraction speed brake controls blade speed and protects fingers from touching blade.
  • Blade printed Conduit Bending Table helps calculate offsets and saddles.
Check Stock

AILEETE Brake Cable 115-8439 for Toro 22 Personal Pace Recycler Lawn Mower 20333 20333C 20373 20376 20958 Replaces 290-923

  • Replaces OEM Parts: Toro 115-8439, Stens 290-923.
  • Fits Models: Toro 20333 (2009 and Newer), 20333C (2010-2012), 20373 (2012-2013), 20376 (2013), 20958 (2010 and Newer) Walk Behind Lawn Mower.
  • Control Brake Cable Length: 63-1/2", Conduit Length: 53-1/2", Cable Ends Eyelet One End, Spring On Other.
  • Replacement For Toro Recycler Engeine Blade Brake Cable.
  • 115-8439 Brake Cable Fits Toro 22" Personal Pace Recycler Lawn Mowers.
Check Stock

Tektro HD-e350 eBike Hydraulic Disc Brake with 2Pcs 160/180mm Rotor

  • 【Electric Induction Control System】With power cut-off sensor, when braking, the signal is sent to the electronic control system to power off the motor. Cable length 190mm. Please pay attention to check whether the segment of the wiring port matches..
  • right rear 1850mm. This hydraulic disc brake is only suitable for ebikes. 【Oil】Non-corrosive environmentally friendly mineral oil..
  • 【Caliper】 Forged aluminum body. Open system, 2 piston. Weight Front: 302g / Rear: 322g. 【Brake Lever】:Cast aluminum lever & bracket. Two-pieces clamp. 3 finger blade..
  • 【Rotor】Diameter 180mm. Thickness 1.8mm. Weight 150g each. Lightweight polygonal guide design. High heat dissipation and heat resistance. 【Pads】High-performance metal-ceramic composites, low noise resin pad..
  • Note: the rear calipers and lever came in separate pieces so you can route internally. The brake hose were already filled with brake fluid, so you need to be careful not to spill the brake fluid when you install it..
Check Stock

Motorcycle Locks Heavy Duty Anti Theft,Cable Locks with Combination,Heavy Duty Bike Lock with Key Seatylock,Mini Lock,Wheel Disc Lock,Disk Brake Lock Accessories for Adult Bikes and Cables

  • ...out any splicing, strengthened firmness, anti-smashing, anti-hydraulic clamp, waterproof, anti-drilling, and no rust! The appearance is exquisite, like the boots of an old cowboy full of stories!.
  • 【Automatic positioning】Automatic positioning design, no key is needed for locking, no need to press, insert the disc brake lock into the disc brake disc and it will be locked when it encounters the hole, which is convenient and quick!.
  • 【Scope of use】Bicycles or motorcycles with disc brakes, battery cars, etc.! The disc brake lock hole must be larger than 5.5mm, and the disc brake disc with the disc brake hole less than 19mm from the edge can be used! Product size.
  • bottom length 60mm, width 25mm, height 53mm, top length 35mm! It weighs about 300g and can be used with a reminder rope (length 1.3M)!.
Check Stock

KREG ACS-SAW Adaptive Cutting System Plunge Saw

  • Plunge-cutting circular saw for cutting solid wood and plywood when paired with the Kreg 62" Guide Track.
  • Powerful 12-amp, 120-volt variable speed motor with load compensation.
  • Safe with fully-shrouded , retracting blade, riving knife, electronic blade brake, and anti-kickback control.
  • Blade-left design is optimized for right-handed users, and provides superior cutting visibility and control.
  • High-capacity cutting with 2-1/8" maximum cut at 90° and 1 1/2" at 45°.
Check Stock

KAKA Industrial BP-1650, 50" x 16 Gauge Bench Model Box & Pan Brake,Max Box Depth 4-Inch, Beam Adjustment 5/8” Pan and Box Brake Machine

  • Lift gate service will have extra charges and can be requested for you at a discounted rate, please send us a message stating you need the service. A valid phone number is REQUIRED. The carrier will contact you one day before the delivery, please provide a valid phone number..
  • VERSATILITY PAN BOX BRKAE. With fingers installed, this high quality brake can be used as a full-length nose bar, turning the machine into a straight bending brake.
  • EASY OPERATING BRAKE. Sectioned fingers are easily removed for box bending and special forming operations. Stop rod is designed for repeatable bending.
  • HIGH FLEXIBILITY BRAKE. This 50-Inch box and pan brake has 16 assorted size section fingers which allows producing many sizes of boxed and pans. when bending at full capacity, the counterweight apron lift assist facilitates the process with little effort.
  • BRAOD APPLICATION. Thickness adjustment can be achieve merely via adjusting blade gap. This solid build sheet metal pan box brake incorporates all the features of our standard hand brakes but with greater range of applications.
Check Stock

ITEQ Brake Lining Thickness Gauge 8 Piece SAE & Metric Steel Constructions

  • Color coded brake pad gauge to identify thickness level ranges for brake lining inspection.
  • The brake measuring tool can be used to quickly gauge any vehicle including trucks and heavy duty transportation.
  • Set of 8 gauges denoting 3 thickness levels: Green, Yellow & Red, which indentify if the brakes are still good (Green), should be serviced (Yellow) and must be serviced (Red).
  • Each gauge blade has both Metric & SAE: 3 green (12, 10, 8 mm & 0.4724, 0.3937, 0.3150 inch), 3 yellow (6, 5, 4 mm & 0.2362, 0.1969, 0.1575 inch), and 2 red (3, 2 mm & 0.1181, 0.0787 inch).
  • Constructed out of steel with powder coat riveted together for extra strength and durability.
Check Stock

Milwaukee 2786-20 M18 FUEL Lithium-Ion 9 in Cut-Off Saw w/ONE-KEY Tool Only

  • Up To 50% Lighter Than Gas with Power To Cut Reinforced Concrete.
Check Stock