Top Brake Pedal Switch Connector

Glodorm Upgrade Mod Brake and Throttle Pedal Spring Kit for LOGITECH G27 G29 G920 Racing Wheel

  • Design background of the Brake and Throttle Pedal Spring Kit: Many Logitech racing owners report that the original brake and throttle pedal is too soft or too hard, so it can not experience the real brake and throttle pedal.The modified solution is to improve the feel of the Brake and Throttle by replacing our specially designed Brake and Throttle springs and simulated vacuum hydraulics.This is by far the cheapest way to convert..
  • Advantage: Improve pedal feel with a balanced increase in firmness. Simulates the pedals in a real car.Improve lap time and consistancy when compared to an unmodified pedal..
  • Suitable for: Logitech G27 / G29 / G920 Racing Wheel( If you are not sure if your model can be installed, you can contact us to confirm.).
  • Glodorm Upgrade Mod Brake and Throttle Pedal Spring Kit for LOGITECH G27 G29 G920 Racing Wheel.
  • Packing includes:1 * Specially Designed Brake Spring, 1 * Specially Designed Throttle Spring, 2 * Wrenches.
Check Stock

Thrustmaster T80 Driveclub Edition Racing Wheel (PS4/ PS3)

  • PS4 / PS3 sliding switch (for full compatibility of the USB Racing Wheel on PS3.
  • 2 On-wheel sequential digital gear shift paddles.
  • Large optimized pedal set - Adjustable angle of inclination for each pedal & Brake pedal featuring progressive resistance.
  • Fully programmable: 2 sequential levers + 11 action buttons + D-Pad.
  • Large programmable, progressive pedal set with wide foot-rest for ultra-precise, comfortable acceleration and braking.
  • Adjustable wheel sensitivity for precise driving.
  • Central clamping system with wide jaws for optimal stability with all desk and table types.
Check Stock

NOWIGOT 2pcs,Red Accelerator Gas Pedal Brake No Drilling Pedal Cover Anti-Slip Performance Aluminum Alloy Foot Pads Kit Fit for for Dodge Challenger Charger Chrysler 300 2009-2021

  • ☛Fitment:Gas Brake Pedal cover fits for Dodge Challenger /Dodge Charger / Chrysler 300 2009-2021.(Not fit for SRT&2016 Charger)（Before placing an order, please make sure that the photo is the same.）.
  • ☛High Quality:The Made of high quality aluminum alloy with black anti-slip rubber, Non-slip surface design.NOTE:The original brake pedal rubber pad needs to be removed before installation.Otherwise, the brake pedal cannot be properly installed on our products..
  • ☛Safety Design:Black anti-slip rubber strip, increasing the friction between the soles and pedals, wear-proof and corrosion-proof, improve safe driving..
  • ☛Easy installation:No need tools, please remove the original brake pedal rubber pad after remove, can install brake pedal pad, gas pedal cover don't need to remove. (Note: Remove the factory brake rubber padel cover to add our brake pedal product.).
  • ☛Quality Guarantee:If you're not satisfied with our pedal, simply return it for a full refund in 30 days, no questions asked money back. We will reply within 24 hours and give you a satisfactory answer..
Check Stock

Allstar ALL76252 60-120 PSI Range 4-1/2 Amp Rating Pressure Type Brake Light Switch with 6-32 Screw Terminal

  • Brake light switch is a pressure type with a 1/8-27 thread.
  • Features 6-32 screw terminals and has a 4-1/2 amp rating.
  • Switch has male bullet terminals for easy, two-wire hook up and commonly used with under-floor mounted brake pedal assemblies.
Check Stock

NEW WILWOOD LONG REVERSE SWING MOUNT CLUTCH OR BRAKE PEDAL ASSEMBLY WITH ADJUSTABLE PEDAL PADS, 6 TO 1 RATIO

  • Brand New Wilwood Long Reverse Swing Mount Clutch Pedal or Brake Pedal with Adjustable Pedal Pads (Wilwood Part # 340-13574)..
  • Wilwood's new Reverse Mount Swing Pedal assembly can be used as a clutch pedal with a single outlet master cylinder or as a brake pedal with a tandem master cylinder..
  • It features all aluminum frame and forged aluminum pedal arms with ladder style construction. ..
  • Features: | Can be used: | * As a Clutch Pedal with a single outlet master cylinder | * As a Brake Pedal with a tandem master cylinder that has a horizontal mounting, when used with a Wilwood Part # 250-3677 (not included with this pedal).
  • Lightweight | * All aluminum frame and forged aluminum pedal arms with ladder-style construction | * New waffle style pedal pads are of special adjustable design that allows fine-tuning of the pedal location and clearance | * Features a 6:1 pedal ratio | * Easy mounting location | * Below you can view and download the instruction booklet for this assembly here..
Check Stock

Autogem Officially Licensed RAM Hitch Cover Black

  • Long life LED light powered Dodge Ram tailgate emblems.
  • Add a stylish touch to your vehicle with Officially licensed, LED Lighted Hitch Cover For a clean look, use an extension to place the wire behind the bumper on certain models..
  • Light-up insignia activates when running lights are on and brightens when brake pedal is pressed (Low illumination while you’re using tail lights & High illumination when you brake or turn on the hazard lights).
  • Durable plastic is corrosion resistant, Fast, easy installation-Some drilling required.
  • Wiring harness plugs into your vehicle’s existing 4-pole trailer connector & Hitch cover slides into receiver, keeping out dirt and grime..
Check Stock

NEW SOUTHWEST SPEED RACING BRAKE & CLUTCH PEDAL ASSEMBLY WITH MASTER CYLINDERS & BALANCE BAR, REVERSE SWING MOUNT, SHORT 5 TO 1 RATIO

  • Brand New Southwest Speed Short Reverse Swing Mount Brake & Clutch Pedal Combo Kit With 3 Aluminum Master Cylinders (SWS Part # 301-2663). This combo is very similar to the Wilwood Part # 340-4828X3, only about $50 cheaper..
  • Southwest Speed High Volume Aluminum Master Cylinders | * High pressure die-cast from high-grade aluminum, fully machined and assembled with extreme precision * Features the highest fluid capacity of any integral reservoir design * With a total capacity of 8.2 ounces, there is at least 26% more fluid than most competitive brands * More fluid volume means cooler temperatures and additional insurance for extreme conditions where high pad wear can compromise fluid levels during long runs.
  • Kit includes: | * 1 - Reverse swing mount dual pedal, short design, 5:1 ratio (# 301-266) * 1 - Aluminum clutch master cylinder, 3/4" bore (# 301-290) * 1 - Aluminum brake master cylinder, 7/8" bore (# 301-291) * 1 - Aluminum brake master cylinder, 1" bore (# 301-292).
  • Find more Pedals as well as many other high performance auto parts by visiting the Southwest Speed Amazon Store..
  • Southwest Speed Dual Brake and Clutch Pedal | * This pedal assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside t....
Check Stock

HQRP Foot Switch сompatible with Alesis SR-16 SR-18 Roland CR-1000 Drum Machine DP-2 Damper Sustain Pedal

  • For all electronic keyboards, synthesizers, tone modules or drum machines with 1/4" phone jack sustain-pedal input.
  • Compatible with: Alesis SR-16 SR-18 Roland CR-1000 Drum Machine DP-2 Damper Sustain Pedal.
Check Stock

Dr.Acces Golf Cart Accelerator Pedal Switch for EZGO RXV Cart OEM# 612889

  • If your golf cart cannot start after installation, you need to restart the power supply of the whole car to move it..
  • Load: Typical 3 Amps at 12-14 VDC, Max: 5 Amps at 12-14 VDC , 2 positions, 2 terminals.
  • Golf cart accelerator and brake pedal switch, is a part of accelerator pedal assembly.Replace EZGO RXV Part number: 612889, 609697，Also replace OEM 607605, 430-003, 612889, 575621101, 605538, AM143287, K7621-62251.
  • Check The Diagram To Kindly ensure you purchase the correct part, Our parts meet or exceed OEM quality,Easy Installation & 1 year Warranty. Return or Refund freely..
Check Stock

Dorman 20716 Brake Pedal Pad Compatible with Select Toyota Models

  • Direct replacement -this brake pedal pad matches the fit and appearance of the original equipment pedal cover.
  • Durable materials - this pedal cover is designed to withstand wear and tear caused by water, dirt and road salt from the driver's shoe.
  • Easy installation - this pad slides onto the brake pedal and requires no special tools or hardware.
  • Quality tested - this brake pedal pad has undergone validation testing to ensure proper fit for this vehicle's application.
Check Stock

FZONE Compact Sustain Pedal for Keyboards Digital Pianos Synthesizers,Tone Modules,Drum Machines All Metal Heavy Design,Non-Slip,with Polarity Switch

  • 003cp003e【Connector: 1/4 inch】FZONE sustain pedal For all digital piano,electronic keyboards, synthesizers, tone modules or drum machines with 1/4" jack sustain-pedal input.003c/p003e.
  • 003cp003e【All Metal Housing Heavy Design】All-metal body better stability and durability，Different from others pedal,FZONE compact pedal Sturdy structure support years of use.003c/p003e.
  • 003cp003e【Polarity Switch Style】Polarity switch provides compatible with ALL BRANDS keyboard piano with 1/4" jacks.003c/p003e.
  • 003cp003e【NON-SLIP】The large rubber anti-slip design gives the pedal a stronger grip on the hard flooring and blankets.003c/p003e.
  • 003cp003e【365-day Warranty】Because the quality of the product is so great, we are confident that offer a 365-day warranty, replacement only, no questions asked!003c/p003e.
Check Stock

CKE for Toyota Camry 2018-2022, RAV4/ Avalon 2019-2022, Highlander 2020-2022, Sienna/Venza 2021-2022, for Lexus ES/LS 2018-2022 Anti-Slip Foot Pedal Cover Brake and Gas Pedal Pad - Red

  • {Applicable Models} Fit for Toyota Camry LE SE XLE XSE Hybrid Nightshade 2018 2019 2020 2021 2022.(Not fit TRD/V6）, for Toyota RAV4/ Avalon 2019 2020 2021 2022, Highlander 2020 2021 2022, Sienna/ Venza 2021 2022, for Lexus ES/ LS 2018 2019 2020 2021 2022. ( Fit Automatic Transmission only. Please comfirm the car model and the same shape pedal before purchasing. It will not fit other models,not fit sport models and other shape pedal.).
  • {Practical} increase pedal friction, filter sand and water of shoe bottom, driving more safe..
  • {Material} Made of high quality aluminum alloy and non-slip rubber, the pedal will not be deformed for a long time..
  • {Easy to Install} No drilling or welding required, just REMOVE THE FACTORY BRAKE PEDAL COVER, and put our brake pedal cover on it. The gas pedal cover don't need to remove. (Tip: Easy install and non-slip, just remember to REMOVE THE FACTORY BRAKE PEDAL COVER to add our product.) Please look at the product display picture 3..
  • {Packaging} 1x gas pedal cover, 1x brake pedal cover..
Check Stock