Top Brazed Carbide Tools

CRAFTSMAN 10-Inch Miter Saw Blade, Combo Pack (CMAS210CMB)

  • DURABILITY: Induction-brazed carbide tips of 10-inch miter saw blade are made for durability and long life.
  • NO MORE WARPING: Heat-treated plate eliminates warping.
  • ACCURATE CUTS: Precision ground teeth for smooth, accurate cuts.
  • CORROSION RESISTANT: Corrosion resistant coating designed to prevent rust.
Check Stock

BINSTAK CNC Spoilboard Surfacing Router Bit 1/4 Shank Slab Flattening Router Bit with 1-3/8 Cutting Diameter 2+2 Flutes Insert Carbide Wood Planer Router Bits Planing Bit for Woodworking

  • Carbide Inserts: 12*12mm. 2+2 inserts design, resulting in a more balanced tool while running and get a smoother surface. The Router Bit comes with insert blades. For more blades, please purchase the K1222 model. ASIN：B0B1MJ9Z9P.
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 4 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

Outdoor Power Deals Solid Carbide 18\ Chainsaw Chain .325 50G 72 DL H30-72 SP33G Read Description for Some Husqvarna Jonsered and Others

  • .325 pitch 0.050 gauge - 72 Drive Link - Semi Chisel Type Chain - Very Aggressive Teeth.
  • Fit's 18" 435 440 445 and some others with the chain specs listed above ONLY.
  • Solid carbide tipped chain is brazed to case hardened saw chain for the ultimate in life and cutting ability. NOTE Designed for woodcutting keep it up and out of the dirt and avoid hitting solid objects this can break or chip the carbide tooth. Do not use for Stumping.
  • Also DO NOT USE in extreme cold weather the teeth will break off.
Check Stock

The Lathe Of Heaven

  • The VINWOX Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The VINWOX Carbide Lathe Tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head. Start your easy wood turning on your Wood Lathe with VINWOX Carbide Turning tools now.
  • Including One set Replaceable Carbide Tip Insert installed on chisel. Rougher: 11.1x11.1x1.75mm 4 sided Square Shape Carbide Tip. Finisher: 12mm Diameter Round Shape Carbide Tip. Detailer: 28x10mm Diamond shape Carbide Tip. Peach Square Radius: 11.3x11.3x1.75mm with 4 sided 2" Arc Square Radius Carbide Tip. Blade images on product picture are only for Clear Vision..
  • 1/2/3/4 Indexed Carbide tip design always offer sharpest edge for turning and maximum cutting life.
  • Top quality and Long cutting life Guaranteed.
Check Stock

Outdoor Power Deals Carbide Chainsaw Saw Chain 20\ 3/8\ 33R-72 050 for Some Stihl MS290 MS291 MS311 MS390

  • 3/8 pitch 0.050 gauge - 72 Drive Link - Semi Chisel Type Chain - Very Aggressive Teeth.
  • Solid carbide tipped chain is brazed to case hardened saw chain for the ultimate in life and cutting ability. Designed for woodcutting keep it up and out of the dirt and avoid hitting solid objects this can break or chip the carbide tooth.
  • ( READ ) MS290 and MS291 can have .325 pitch and this will not fit. Buyer is responsible for verify what pitch chain your saw has.
  • Also NOTE Correct use you must allow the chain to cool back to ambient temperature between uses the teeth with break off if you stop using the chain for any amount of time and then pick it up and start going again. Allow chain to cool a minimum of 3 hours.
Check Stock

YUFUTOL Carbide Tipped Wood Turning tools Lathe set （Finisher/Rougher/Detailer/Hollower Swan Neck Hollower with Solid Wood Handle）and Diamond/Round/Square Carbide Inserts

  • 【Upgraded Carbide Turning Tools Material】High-density tungsten carbide blades are made with high-speed steel blade material which will not wear off easily, stainless steel aluminum handles and a beautiful aluminum alloy case with sponge liner, excellent ergonomics and reliable grip, increased stability and shock resistance.
  • 【Adjustable Aluminum Handle Length】You can freely adjust the length of wood turning tools for lathe according to your preference, just fasten the two screws of the lathe turning tools with the accessory wrench then you can work which is convenient and flexible.
  • 【Replaceable Carbide Blade&Adjustable Sharpe Edges】Our carbide lathe tools matching carbide blades can be replaceable and we provide you with new cutting inserts and maximize cutting life. Each lathe chisel has a tungsten carbide tip with a rotatable, sharp edge. Once the edge becomes dull, you can always rotate the bit to get a new, sharper edge.
  • 【Carbide Lathe Tools Package】You will get 11" tool handle*1, 9.8" connected handle extension*1, 9.8"round turning tool*1, 9.8"diamond turning tool*1, 9.8"square turning tool*1, 9.8"r-shape turning tool*1, interchangeable carbide inserts*8, T15 wrench*1, allen wrench*1,screw*2, aluminum protective case with high elasti....
Check Stock

Savannah Hollower Replacement Carbide Cutter for Savannah Hollower Carbide Turning Tools

  • Carbide turning tools have a couple of advantages of standard turning tools. One of the most satisfying advantages is that we don’t have to sharpen....
  • Carbide cutters will stay sharper for a longer period of time when compared to standard turning tools. When the carbide cutter finally dulls, simply....
  • Carbide cutters don’t so much cut your wood or material like standard turning tools. The idea is that the razor sharp carbide shears the material to....
  • This cutter comes with two screws that are sized for Savannah turning tools, but depending on your turning tool thread size, you may need to use the....
  • While carbide cutters are designed to be disposed of when they are no longer sharp enough to cut into your material, you can sharpen these cutters by....
Check Stock

BOSCH RCB8DG 1-Piece 9 In. Grit 50 TPI Diamond for Cast Iron and Block Reciprocating Saw Blade

  • Diamond Grit cutting edge for cutting cinder block, brick, cast iron, pipe and other abrasive materials..
  • Up to 3-times faster and 3-times longer life than carbide grit blades.
  • Vacuum brazed diamond grit blade for heavy use.
Check Stock

VINWOX 20\ Full Size 4 PCS Carbide Wood Lathe Turning Tool Set, Carbide Lathe Turning Tool, Carbide Turning Tool, Including Rougher, Finisher, Square Radius, Detailer

  • PRESS ✅PROMOTION or ✅EXTRA SAVING FOR FREE GIFT! The VINWOX Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The VINWOX Carbide Lathe Tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head. Start your easy wood turning on your Wood Lathe with VINWOX Carbide Turning tools now.
  • Including One set Replaceable Carbide Tip Insert installed on chisel. Rougher: 11.1x11.1x1.75mm 4 sided Square Shape Carbide Tip. Finisher: 12mm Diameter Round Shape Carbide Tip. Detailer: 28x10mm Diamond shape Carbide Tip. Peach Square Radius: 11.3x11.3x1.75mm with 4 sided 2" Arc Square Radius Carbide Tip. Blade images on product picture are only for Clear Vision..
  • 1/2/3/4 Indexed Carbide tip design always offer sharpest edge for turning and maximum cutting life.
  • Top quality and Long cutting life Guaranteed.
Check Stock

Woodturning Carbide Lathe Tools 17” Full Size Wood Turning Tool Set of 3 Rougher Detailer Finisher Includes Replacement Cutter Inserts 6 pcs – Diamond Round and Square Screws and Key Star Wrenches

  • ✅ CARBIDE WOODTURNING TOOLS - Our lathe turning tools has greatly simplified wood turning, This set of carbide lathe tools is ideal for turners at any skill level, making woodturning fast and more enjoyable. Each lathe chisel features a carbide tip with multiple sharp edges that can be rotated several times, Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood..
  • ✅ CARBIDE TURNING TOOLS SET - Premium quality CNC machined from ½” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor.
  • ✅ ERGONOMICS TOOL HANDLE - Hard and Solid beech wood，Ergonomics design makes it more comfortable while doing turning job. Unlike the aluminum handle wood turning tool on the market which comes with only one handle, which means you have to change out the bar every time you want to switch tools..
  • ✅ WOODTURNING TOOLS & ACCESSORIES - Set includes 3 turning tools : rougher tip – Square 15 x 15 x 2.5mm R50, detailer tip – Diamond 10x28m with Radius point , finisher, with extra sets of carbide inserts. Set comes with extra replaceable carbide insert: 3 Sets of indexable Re....
Check Stock

1 3/8 Diamond Hole Saw Core Heavy Duty Diamond Drill Bit Concrete Granite Quartz Porcelain Slab Countertops Ceramic Tile Brick Brazed with 5/8″-11 Thread 1-3/8 in

  • Heavy duty. pro grade, vacuum brazed diamond hole saw for quartz, granite, concrete, cinder block, brick drilling..
  • Diameter is 1-3/8 inch with 5/8 inch – 11 threaded connection, maximum depth of cut is 1-3/8 inches..
  • Diamond vacuum brazed commercial grade, long life diamond core drill bit hole saw. For heavy duty professional applications..
  • Tile core bits used with core hole drill tools with 5/8 inch -11 threaded angle grinder or other tools..
  • Commercial grade, professional quality heavy duty diamond bits for drilling stone, diamond hole saw bits, diamond drill bit for granite bits for drill.
Check Stock

3 piece Large Carbide Turning Tool Replacement Cutter Set 1 each Square Round and Diamond Shaped Cutters

  • Carbide turning tools have a couple of advantages of standard turning tools. One of the most satisfying advantages is that we don’t have to sharpen....
  • Carbide cutters will stay sharper for a longer period of time when compared to standard turning tools. When the carbide cutter finally dulls, simply....
  • Carbide cutters don’t so much cut your wood or material like standard turning tools. The idea is that the razor sharp carbide shears the material to....
  • These three cutters have been designed to replace the 3 cutters that come with the Savannah 3 piece large carbide turning tool set. However, the....
  • We offer the cutters in a 3 pack that includes 1 each of the most commonly used profiles. This pack also includes 2 screws for securing the cutters to....
Check Stock