Top Silver Brazed Blades

XtremepowerUS Multi-Purpose 14\ Diamond Blade Metal Steel Iron Cut Off Saw Wheel Abrasive, 1\ Arbor Ultra Fast Cutting Blade

  • Able to cut 2-3 more concrete than lower quality blades dues to Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced cut life, cut rate, cut precision, power demands & heat buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
  • Can be used for ferrous metals, iron, steel, stainless steel, rebar, copper, and other high tensile alloy.
  • Longer, Faster and Reliably than other blades that may warp or prematurely wear.
  • Vacuum brazed technology for a longer life span and maintains the blade's diameter.
  • Each blade is engineered to work at 5,500 RPM and a maximum cutting depth of 1" to 1-1/4 inch Max RPM: 5,500.
Check Stock

Stark Elite 14\ Inch Premium Multi-Purpose Diamond Metal Steel Iron Cut Off Wheel Abrasive, 1\ Arbor Ultra Fast Cutting

  • Able to cut 2-3 more concrete than lower quality blades dues to Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced cut life, cut rate, cut precision, power demands & heat buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
  • Can be used for ferrous metals, iron, steel, stainless steel, rebar, copper, and other high tensile alloy.
  • Longer, Faster and Reliably than other blades that may warp or prematurely wear.
  • Vacuum brazed technology for a longer life span and maintains the blade's diameter.
  • Each blade is engineered to work at 5,500 RPM and a maximum cutting depth of 1" to 1-1/4 inch Max RPM: 5,500.
Check Stock

Virginia Abrasives 425-07388 UV Multi-Purpose High Speed Diamond Blade (14\) Asphalt/Concrete Cutter - Wet or Dry - High Speed Cutoff - Performance Cutting Blades (14\ x .125\ x 1\/20mm DP - 10mm Segments)

  • HIGH-SPEED DIAMOND BLADE: Virginia Abrasives laser welded diamond blades are ideal for concrete cutting, or dry cutting, due to their high welding strength. Our laser welded diamond Blade will have a longer life span and stronger cut than brazed diamond blades as the bond between the segment and core is significantly stronger..
  • LASER WELDED SEGMENTS: Rather than sintered blades that have a shorter life and do not cut as efficiently, the Virginia Abrasives diamond saw blades are laser welded to extend the life of every saw diamond blade as well having the ability to cut faster..
  • HIGH-LEVEL PRECISION: As well as reducing the strain on the concrete structure, the high-performance nature of our diamond concrete saw blades make sure it gives it a smooth cut. For more comfort and high-speed cutting, choose our saws blades for your next project..
  • DURABLE: Virginia Abrasives diamond saw blades are highly durable compared to other types of concrete cutting blades out there. Our diamond blade is made using a circular steel cutting disc with huge 12-mm segments on the outer edge that will maintain precision and performance for a long time.
  • OUR STORY: Virginia Abrasives' roots date back to the early 1970s when a hard rock garnet mining business in the Adirondac....
Check Stock

Delta Diamond Extreme 14 Inch 2-Pack Metal Cutting Diamond Blade Heavy-Duty All Purpose Cut Off Wheel for Rebar Steel Sheet Metal Angle Iron Stainless Steel & More 1 -20MM Arbor 14 2pcs

  • HEAVY-DUTY VACUUM BRAZED DIAMONDS - Diamonds are permanently bonded to the heat-treated hi-speed steel core by our advanced vacuum brazing process to create the strongest bond possible in even the most demanding conditions and is extremely resistant to heat. Use for cutting and grinding metal such as rebar, copper, galvanized steel, conduit, angle iron, ductile iron, stainless steel, and more. Will also cut through plastic, PVC, drywall, concrete, granite, and more..
  • LASTS 100X LONGER - A single Diamond Extreme blade outlasts and out performs up to 100 abrasive cut-off wheels. Save time by using one blade without having to constantly put on a new disc after a few cuts. Diamond Extreme blades use a heavy-duty vacuum brazed diamond bonded segment and will not wear out as fast as other diamond discs..
  • CONSTANT CUTTING DEPTH & SAFER - Abrasive discs wear down and will shrink which can be dangerous. Diamond Extreme maintains a constant cutting depth, giving you the maximum cutting depth throughout the life of the blade. The steel core makes the blade much safer to use and produces far fewer sparks and dust. Commonly used by fire departments for fire/rescue situations across the country..
  • SPECIFICATIONS - 2 Pack of 14" diameter X .140 thick with a 1"....
Check Stock

Delta Diamond Extreme 14 Inch Metal Cutting Diamond Blade .135 Wide X 1 Arbor with 20MM Bushing Heavy-Duty All Purpose Cut Off Wheel for Rebar Steel Sheet Metal Angle Iron Stainless Steel & More 14

  • HEAVY-DUTY VACUUM BRAZED DIAMONDS - Diamonds are permanently bonded to the heat-treated hi-speed steel core by our advanced vacuum brazing process to create the strongest bond possible in even the most demanding conditions and is extremely resistant to heat. Use for cutting and grinding metal such as rebar, copper, galvanized steel, conduit, angle iron, ductile iron, stainless steel, and more. Will also cut through plastic, PVC, drywall, concrete, granite, and more..
  • LASTS 100X LONGER - A single Diamond Extreme blade outlasts and out performs up to 100 abrasive cut-off wheels. Save time by using one blade without having to constantly put on a new disc after a few cuts. Diamond Extreme blades use a heavy-duty vacuum brazed diamond bonded segment and will not wear out as fast as other diamond discs..
  • CONSTANT CUTTING DEPTH & SAFER - Abrasive discs wear down and will shrink which can be dangerous. Diamond Extreme maintains a constant cutting depth, giving you the maximum cutting depth throughout the life of the blade. The steel core makes the blade much safer to use and produces far fewer sparks and dust. Commonly used by fire departments for fire/rescue situations across the country..
  • SPECIFICATIONS - 14" diameter X .140 thick with a 1" arbor. In....
Check Stock

SHDIATOOL 5-Piece 4 in Diamond Jig Saw Blades for Tile Ceramic Brick Granite Marble with T-Shank 46 Grit

  • 4 in.(100mm) overall length, Color: golden, 5 pieces pack..
  • 46 grit diamond matrix for fine, straight or curved cuts..
  • Designed for cutting granite marble ceramic tile brick plastic.
  • High Professional Quality Vacuum Brazed Diamond Jig Saw Blades.
  • If you have any needs or questions about our products,please contact to us firstly, thanks, we have good After-sales service.
Check Stock

KURSTOL Diamond Mortar Raking Bit - 2pcs 7.2mm x 74mm Round Shank Tuck Point Pin for Brickwork Joint Mortar Removal Masonry,Stone,Concrete Drill Bit

  • 【Package Includes】2pcs Diamond Glitter Bits,Diameter 7.2mm,6.35mm long x 1/4" round shank,Diamond Height 74mm,Grit 45/50,Machine:Drills,RPM:2000-5000.
  • 【Vacuum Brazed Technology】 Fully exposed diamonds joined by a vacuum brazing process,this diamond bit will grind faster, last longer and less cost..
  • 【Suitable for intricate and delicate work】 Tuck Point Pin cuts away mortar in hard-to-reach inside corners or irregular joints that blades cannot reach. Precise, fast, controlled mortar removal.
  • 【Easy to operate】Easier and less dangerous to operate than diamond blade,it couldn't cause damage to important brickwork or valuable stone but diamond blades can..
  • 【Wide Compatibility】Get close to window or door frames without over-cutting.Easily remove mortar around a single brick without cutting into other mortar..
Check Stock

BINSTAK CNC Spoilboard Surfacing Router Bit 1/4 Shank Slab Flattening Router Bit with 1-3/8 Cutting Diameter 2+2 Flutes Insert Carbide Wood Planer Router Bits Planing Bit for Woodworking

  • Carbide Inserts: 12*12mm. 2+2 inserts design, resulting in a more balanced tool while running and get a smoother surface. The Router Bit comes with insert blades. For more blades, please purchase the K1222 model. ASIN:B0B1MJ9Z9P.
  • INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 4 cutting blades..
  • COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide inserts. All 4 edges of carbide inserts can be used, use a screwdriver to make other blade edge outside. Replace the carbide inserts when needed, instead of replacing the whole bit. Cost effective solution compared to brazed router bits and solid carbide spiral bits..
  • This planer router bit is perfect for wood slabs flattening, resurface or plane the top surface of the spoilboard. Used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic and etc..
  • Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc..
Check Stock

Harris Ironworker 510 DLX Oxygen Acetylene Torch Kit 4400366

  • Cutting Attachments feature solid forged heads that resist damage from abuse and flashbacks. Solid Brass cutting lever flips forward for fast convenient and positive connecting to handle even when wearing gloves..
  • Model 85 Torch Handles feature silver-brazed, twin-tube construction for safety and durability and easily replaceable Flashguard checkvalves..
  • Regulators are equipped with an encapsulated Teflon seat for safety and extended service life and have a 7-year warranty..
  • Two-piece Cutting Tip is easy to clean and produces higher preheats and is manufactured with a copper shell to withstand higher heat with less damage to the tip..
Check Stock

Diamond Cup Grinding Wheel 4-1/2 Inch Double Row Grinding Wheel 4 Inch 12-Segment Turbo Row Grinding Wheel Angle Grinder Disc for Grinder Polishing and Cleaning Stone (2, Elegant Style)

  • Strong and sturdy: made of heat-treated steel body and high concentration of diamond, these diamond cup grinding wheels are rust and corrode resistant, not easy to deform, removing materials quickly.
  • Fast sanding efficiency: at a height of 5 mm, the brazed double-row fan or brazed corrugated turbo row fan is designed for a fluent grinding experience, the diamond wheel with air holes design can help maintain and cool the cutting pattern to reduce wear, improving the work efficiency.
  • Easy to operate: diamond grinding wheels are easy to operate and install, which are suitable for grinders and angle grinders.
  • Please follow the using instruction of angle grinders and grinders during use to avoid accidents.
  • Widely applied: these grinding wheels are suitable for various types of stone, which can be applied for dry or wet grinding of concrete, granite, marble, ceramic tile, masonry and some other construction materials, smoothing uneven surfaces and removing flash.
  • Double row and turbo row: you will get 2 pieces of diamond cup grinding wheels in 1 package, each is equipped with 1 piece of silver ring, one is 4-1/2-Inch double row grinding wheel, and the other is 4 inch turbo row grinding wheel, which helps you to easily cope with different occasion.
Check Stock

Harris Ironworker 4400370 HHD 300 CGA Acetylene Cutting Torch Outfit

  • Cutting Attachments feature solid forged heads that resist damage from abuse and flashbacks. Solid Brass cutting lever flips forward for fast convenient and positive connecting to handle even when wearing gloves..
  • Model 85 Torch Handles feature silver-brazed, twin-tube construction for safety and durability and easily replaceable Flashguard checkvalves..
  • Regulators are equipped with an encapsulated Teflon seat for safety and extended service life and have a 7-year warranty..
  • Two-piece Cutting Tip is easy to clean and produces higher preheats and is manufactured with a copper shell to withstand higher heat with less damage to the tip..
Check Stock

Harris Ironworker CGA 300 DLX Oxygen Acetylene Torch Kit 4400369

  • Cutting Attachments feature solid forged heads that resist damage from abuse and flashbacks. Solid Brass cutting lever flips forward for fast convenient and positive connecting to handle even when wearing gloves..
  • Model 85 Torch Handles feature silver-brazed, twin-tube construction for safety and durability and easily replaceable Flashguard checkvalves..
  • Regulators are equipped with an encapsulated Teflon seat for safety and extended service life and have a 7-year warranty..
  • Two-piece Cutting Tip is easy to clean and produces higher preheats and is manufactured with a copper shell to withstand higher heat with less damage to the tip..
Check Stock