Top Burma Teak Engineered Flooring

AQUARM EVA Foam Teak Boat Flooring Decking for Sea Deck Marine Flooring, Yacht, RV, Skid Self-Adhesive and Easy Clean, 94.5x31.5 inch

  • ⭐【HIGH QUALITY MATERIAL】This boat marine flooring mat is made of EVA foam faux teak sheets. EVA has advantages of heat insulation, non-skid, shock absorption, salt water proof. Not easy deformation tear or damage, it is safe and durable..
  • ⭐【EASY TO INSTALL】Adhesive backing makes it very easy to apply to your flooring. You also can be cut with a sharp knife to fit a number of most deck sheet, perfectly decorate your boat..
  • ⭐【EASY TO CLEAN】This boat flooring mat is not easily soiled and easy to clean. It can be washed with vacuum cleaner or be pressure washed. It is natural and comfortable..
  • ⭐【NON-SLIPPERY】The sea deck boat flooring is with deep ditches, which will help to increase friction and prevent sliding. You can walk on it and no need to worry about slipping..
  • ⭐【WIDE APPLICATION】Take away the pain from standing on the hard deck of your boat with this comfortable soft EVA deck foam.Recommended using at the yacht flooring, boat flooring, RV flooring, car flooring, swimming pool flooring, garden flooring and other decoration..
Check Stock

Acacia Teak Wood Flooring Floor Tile - Great Backyard Decor to Update Your Look! Replace That Vinyl Flooring or a Great Way To Cover That Old Decking or Paver Floors. 10 SQ/FT Per Box. 12' x 12' Tiles

  • Patio Tiles, outdoor flooring and indoor flooring, especially this hardwood flooring, will update any decor. Wood Tiles bring in a rich new look that will amaze your guests!.
  • Acacia wood flooring tiles interlock together without the need for floor adhesive! Use as a floor covering to hide the unsightly concrete below! Made from premium Acacia Teak wood..
  • Tired of floor pops, or that nasty vinyl flooring peel and stick? DIY Friendly! Peel and stick flooring is a thing of the past, interlocking floor tiles make for a lifeproof flooring..
  • Use in your garden shed, plastic storage shed, as basement flooring, underneath your patio storage boxes, as your bathroom floor tile (bathroom flooring), or as pavers outdoor, the possibilities are endless!.
  • Deck Tiles will last infinitely longer than your typical patio flooring or vinyl floor and they are so easy to install, just snap them together and lay them down! Replace your linoleum flooring or tile flooring by setting this wood floor over the top..
Check Stock

Flash Furniture 3 Piece Patio Dining Table Set - Indoor/Outdoor Black Steel Framed 30\ Square Faux Teak Table - 2 Stacking Club Chairs with Teak Accented Arms

  • 3 Piece all-weather faux teak table and 2 chair patio set.
  • Black steel frame with square pedestal base.
  • 2 CHAIRS WITH ARMS: Faux teak slatted backs and seats and accented arms.
  • Lightweight aluminum frame with welded construction.
  • ALL-WEATHER CONSTRUCTION: Powder coated all-weather frames resist marring.
  • Plastic floor glides protect hard flooring surfaces when used indoors.
  • Cleans easily with water and a neutral detergent.
  • PRODUCT MEASUREMENTS: Table Size: 30"W x 30"D x 30"H.
  • Table Top: 30"W x 30"D x 1.375"H | Chair Size (2): 18.75"W x 22"D x 33.5"H.
Check Stock

MYOYAY EVA Foam Boat Flooring Sheet, 86.6"×23.6" Self-Adhesive Comfort Floor Mat, Non-Slip Marine Boat Deck Carpet, DIY Traction Pads Grip Mat for for Boat Motorboat RV Yacht Kayak(Black)

  • ...rable materials with a simple, robust peel-and-stick backing，good looking & easy maintain..
  • ⛵【Self-adhesive, Easy to Install】The boat decking sheet adopts peel-and-stick backing, strong pressure self-adhesive to install it to the floor surface. This boat marine flooring mat can easily be cut down to fit nearly any surface on a boat where non-skid, or protection for the boat's surface is required..
  • ⛵【Easy to Cut&Clean】Easy to cut to any size you need. Also, our rug is designed naturally stain-resistant. You can easily wipe any dirt on it.This boat marine flooring mat is not easily soiled, it is easy to clean. It can be washed with vacuum cleaner, or be pressure washed..
  • ⛵【Wildly Application】The eva teak foam is universal for wood, metal and glass flooring ect. Also suitable for marine yacht swim platforms , cockpit , aft deck , bows , steps , helm station pads ,surfboard, poling platforms , trailer and pontoon. etc. It can be installed independently by DIY and easy to operate..
Check Stock

WOOWAVE EVA Foam Teak Floor Decking Sheet for Boat Yacht Non-Slip and Self-Adhesive Sea Deck Boat Flooring Pad RV Swimming Pool Mat Strong Glue 94.5''x31.5''

  • ☞【EASY TO INSTALL】You can use a cutting tool to cut any size for installation. This pad with strong glue on the back (please keep the installation site clean). Very easy to cut and hard to fall off after cutting, and it is flat and beautiful. Note: The boat flooring can be flattened with heavy objects before being installed to prevent it from curling to affect the installation effect..
  • ☞【PERFECT PERFORMANCE】Our boat non slip flooring stain resistant and easy to clean, you can easily wipe and dirt on it, washed with vacuum cleaner or be pressure washed. The thickness of 6MM provides unparalleled comfort and excellent traction for your ship deck floor and motorboat, strip grooves is conducive to the drainage of stagnant water to keep dry, avoid slipping and protect you and your companions..
  • ☞【WIDE APPLICATION】Premium foam teak floor decking sheet can be perfectly decorated and highlight your boat. No more blemishes, cracks and other imperfections after laying down EVA marine boat flooring. Sea deck boat flooring perfect for boat flooring, car flooring, garden flooring, pontoon boat flooring, golf c....
Check Stock

EAB Tool 2100010 EAB Tool Professional Floor Cutter, 13", Black

  • Bonus installation Kit and double-sided honing stone included! Designed to cut laminate, solid wood and engineered flooring up to 15mm (5/8"). will also cut vinyl tile and fiber cement siding such as hardy plank..
  • Cuts laminate flooring, wood flooring and engineered flooring up to 15 mm (5/8"), vinyl tile, pressboard siding and fiber cement siding such as hardier plank.
  • Angle gauge allows for cuts up to 45 degrees.
  • Quiet, dust free operation, No electricity required.Replaceable blade 2100011 can be re-sharpened with included sharpening stone.Installation Kit: tapping block, Wedge SPACER, pull bar and double-sided honing stone.Ships to the US only.Professional level.
Check Stock

Pewter Flasks and Potato Salad

  • The MARSHALLTOWN Ultra-Lite Flooring Cutter 9" is essential for your next vinyl, laminate, or engineered hardwood flooring installation..
  • Cuts products up to 9" wide, 12 mm thick, and a Janka hardness of 1200..
  • At 14 pounds, this handy shear allows you to cut where you work without dust, noise, or electricity..
  • Unique features include an integrated handle for easy, single hand carry..
  • Flooring Cutter, laminate cutter, laminate flooring cutter, vinyl floor cutter, guillotine laminate floor cutter, laminate cutter tool, vinyl flooring cutter, vinyl plank flooring cutter, vinyl plank floor cutter, vinyl flooring cutter,.
Check Stock

DRICORE Insul-Armor Premium Subfloor with Air Gap Technology, Helps Protect Water Leaks, Warmer & Soft Finished Floors 23 ¼" x 47 ¼" x 1" Covers 76 Sq. Feet (Bundle of 10)

  • ...LITY: Our DRICORE Insul-Armor floor panels are equipped with Air Gap Technology that helps protect against moisture and small water leaks. The basement subfloor panel, for home flooring, is designed with a high-density material for an insulated subfloor which is best for basement flooring, laminate flooring and for engineered wood floors..
  • EASY TO INSTALL: The advanced tongue and groove design of our lightweight subfloor panels makes the installation easy and fast. It is made with inorganic material and a 500 sq. ft. room can be completed in an afternoon! Ideal for renovation, refinishing floors, basement refinishing, floor insulation underlayment, carpet padding, and floor padding, the easy cut flooring panel requires no power tools, no taping and leaves no sawdust or mess behind..
  • INSULATED FOR WARMTH: Our insulated subfloor panels elevate your finished floors to create a thermal break from the cold concrete floors. The premium flooring panel makes floors feel warm with an R-value of 4.1 thus helping you stay comfortable with floors that feel warmer all year round. Feel confident with our premium subfloor panels..
Check Stock

DRICORE Insul-Armor Premium Subfloor with Air Gap Technology, Helps Protect Water Leaks, Warmer & Soft Finished Floors 23 ¼" x 47 ¼" x 1" Covers 76 Sq. Feet (Bundle of 10)

  • ...LITY: Our DRICORE Insul-Armor floor panels are equipped with Air Gap Technology that helps protect against moisture and small water leaks. The basement subfloor panel, for home flooring, is designed with a high-density material for an insulated subfloor which is best for basement flooring, laminate flooring and for engineered wood floors..
  • EASY TO INSTALL: The advanced tongue and groove design of our lightweight subfloor panels makes the installation easy and fast. It is made with inorganic material and a 500 sq. ft. room can be completed in an afternoon! Ideal for renovation, refinishing floors, basement refinishing, floor insulation underlayment, carpet padding, and floor padding, the easy cut flooring panel requires no power tools, no taping and leaves no sawdust or mess behind..
  • INSULATED FOR WARMTH: Our insulated subfloor panels elevate your finished floors to create a thermal break from the cold concrete floors. The premium flooring panel makes floors feel warm with an R-value of 4.1 thus helping you stay comfortable with floors that feel warmer all year round. Feel confident with our premium subfloor panels..
Check Stock

NuMax S50LSDH Pneumatic 2-in-1 15.5-Gauge and 16-Gauge 2\ Dual Handle Flooring Nailer and Stapler, Grey and Black

  • Nailed It: This 2-in-1 flooring nailer and stapler works with 16 gauge L-cleats and 15.5 gauge 1/2" crown flooring staples. It features a dual handle design to suit your installation method for solid wood or engineered flooring..
  • Pro Design: This pneumatic nailer features a durable and lightweight aluminum construction, light strike bumper, semi-quick release nose to easily clear jams, and interchangeable base plates enabling you to install solid or engineered flooring from 1/2" to 3/4"..
  • The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between..
  • Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and DeWalt..
Check Stock

Le Click - Teak Interlocking Flooring Tiles - Windmill Pattern - Natural Finish 50 Square Feet

  • Install on your Patio, Deck, or Yard. No Tools Required. Low Maintenance..
  • Each Box Contains 10 tiles. Dimensions: 11.8. X 11.8 in (essentially 10 Square Per Box).
Check Stock

Powernail 50F Pneumatic 18 Gauge Trigger Pull L-Cleat Flooring Nailer (Installs 3/8\ to 3/4\ Hardwood & Engineered)

  • Put the Hammer Down! This 18-gauge flooring nailer takes all of the intimidation out of a floor installation with the pull of a trigger. No mallet is required to operate this tool, but it still drives an 18-gauge floor cleat! It is perfect for today's top brands of engineered flooring..
  • Install the widest variety of Wood Floor. Featuring Powernail's patented FLEX Foot technology, this 18-ga floor nailer is fully adjustable and installs engineered wood flooring from 3/4" to 3/8"..
  • Protect your floor! This Powernailer's adjustable foot will not scratch or damage prefinished floor, nor will it loosen half-way through an installation. The Flex foot keeps this tool off of the subfloor so when adhesive is used your tool will not drag or catch..
  • This trigger-pull cleat nailer is sold as a kit and includes one model 50F nailer, one large tapping block and a Heavy-Duty Carrying Case..
  • Install your floor with a nail designed specifically for floors! The Powernail Model 50F drives 18-gauge, L-shaped Floor Cleats (Floor Nails) in lengths from 1-3/4" to 1". The model 50F can install traditional tongue and groove Engineered Wood Flooring as well as Interlocking systems. Use with 18-gauge Powernail PowerCleats or similar brands 18-ga L-shaped steel cleats..
Check Stock