Top Cable Ribbon Flex Cables

D-FLIFE GPS Antenna WiFi Signal Flex Ribbon Cable Replacement Kit + Module for iPhone 6 (for iPhone 6)

  • GPS Antenna WiFi Signal Flex Ribbon Cable Replacement Kit + Module + Screws for iPhone 6 4.7".
  • Easy installation: Accurate Replacement part used to Replace the broken damaged part! Perfect fit Guaranteed..
  • Compatibility: Compatible ONLY with iPhone 6 A1549 A1586 A1589 NOT with iPhone 6 Plus.
  • Compatible ONLY with iPhone 6 A1549 A1586 A1589 NOT with iPhone 6 Plus.
  • High quality wifi flex ribbon cable for best quality signal reception.
Check Stock

19.6 inch Camera Cable for Raspberry Pi 4 B FFC FPC Ribbon 15 pin Extension Cord Flexible Flat Wire Cable Connection for LCD,Car Navigation,Car Audio,DVD Player,Recorder,Printer 19.6''/ 50cm (2 Pcs)

  • This ribbon flat cable is specially designed for stock long flex cable from a Raspberry Pi Camera for 19.6inch (50cm )..
  • The cable usually consists of a flat and flexible plastic film base, with multiple metallic conductors bonded to one surface..
  • Each order comes with two cables, the raspberry pi and pi camera shown in the picture are not included (but we have Pi camera in the shop)..
  • This cable is perfectly compatible for Raspberry Pi 3, 3 model b, 2, 2b and B+..
  • Also applicable for LCD, LCD TV, car navigation, car audio, laptop, PC, DVD player, recorder, printer, copy machine, etc..
Check Stock

Aoicrie for Raspberry pi Zero Camera Module 5MP 1080p OV5647 Sensor Video Compatible with Pi Zero Ribbon Cable&FPC Cable for Raspberry Pi Model A/B/B+,Pi 2 for Raspberry Pi 3,3B+ Pi Zero/Zero W Pi 4

  • ...p @ 30fps, 720p @ 60fps and 640x480p 60/90 HD video recording.Easy plug and play type capability，Can be applied to image recognition and image tracking..
  • Both cables 2 cables included between the camera connectors for the Pi Zero and Model A&B series,The module attaches to for Raspberry Pi, by way of a 15 Pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI), which was designed especially for interfacing to cameras.15CM Golden Ribben Flex Cable for Raspberry Pi Zero Zerow, model: FPC.
  • 5.90in/15cm and 19.68in/50cm white camera cable for Raspberry Pi Model A/B/B+, Pi 2 and for Raspberry Pi 4 3, 3B+, model: FFC.The C.
  • Connect the included ribbon cable to the CSI (Camera Serial Interface) port on your for Raspberry Pi.HD video Can be directly connected to the for raspberry pie control panel via soft cable, capable of recording 1080p Full HD video at 30 frames per second.Easy setup with paper instructions to help you activate the camera feature on Raspbian. Also works like the official ones on systems like..
  • The camera module board itself is tiny, making it perfect for mobile or other applications where size and weight are important. for Raspberry pi camera is really good for learning program, monitor real-time experiment a....
Check Stock

CableCreation Internal Mini SAS HD Cable, 1.6FT Mini SAS SFF-8643 to Mini SAS 36Pin SFF-8087 Cable, Mini SAS 36Pin to SFF-8643 Cable, 0.5M

  • ...nd 4x SAS 29 pin SFF-8482 data and power Target drive connectors.
  • DIY or pro installers require a forward fan-out cable with an internal mSAS connector when expanding storage needs for Storage Area Network (SAN) or Direct Attached Storage (DAS) applications.
  • Sturdy molded connectors provide a secure connection.
  • Slim ribbon cables in a woven mesh sheath minimize airflow impact in a computer case.
  • Integrated SATA power supply cables make it easy to see what is connected.
Check Stock

NSLikey R2 L2 L1 R1 Replacement Cable for Sony PS5 Controller Flex Cable Adaptive Trigger Right

  • L2 R2 Motor Connect Ribbon Flex Cable Left and Right Adaptive Trigger Cable For PS5 Controller.
  • Replacement flex cable,great to replace the defective/broken one, makes your PS5 controller work in a good condition.
Check Stock

MMOBIEL Charging Port Replacement for PlayStation PS4 Controller Dualshock 4 Model JDS-011 12 Pin Flex Cable Incl + Screwdriver

  • High Quality PlayStation USB charging port socket board adapter Replacement for PlayStation PS4 Model: JDS-011 with 12 pin flex ribbon cable.....
  • Compatibility: Only with Sony PlayStation PS4 Console CUH-1100, CUH-1115A, CUH-1115B..
  • Kindly reminder: Sony has launched 5th edition of this DualShock 4 controller. Each model comes with a different built-in charger module. It is highly....
  • Package includes: 1x Micro-USB charging port socket JDS-011. 1x 12 Pin flex ribbon cable. 1x (+) Screwdriver. Professional installation is....
  • High Quality Product all Items tested before shipment. Item in Stock..
Check Stock

Tab A 8.0 T387 USB Charging Port Flex Cable Replacement T387V T387W T387P T387T microUSB Charger Dock Board Flex Cable Connector for Samsung Galaxy Tab A 8.0 (2018) SM-T387 Port Flex Cable Repair Part

  • ...ger Board Repair Part With Tools,Don't Fit For Samsung Galaxy Tab A 8.0 (2017) SM-T380 SM-T385..
  • ★ HIGH QUALITY --- The T387 Charging Port microUSB Flex Cable USB Charger Port 100% Tested Well Before Shipping Out .100% Perfect Fit for Samsung Galaxy Tab A 8.0 2018 SM-T387 SM-T387W SM-T387V Charging Port Flex Cable Ribbon..
  • ★ WHAT YOU GET --- 1 Piece T387 Charging Port Flex Cable Replacement SM-T387 USB Charging Port Board Flex Cable for Galaxy TAB A 8.0 2018 T387V. 1 Set Repair Tools..
  • ★ IMPOTANT --- Please Double Make Sure Your Phone Model is SM-T387 Before Buy the Replacement USB Charging Port Board Flex Cable for Samsung Galaxy Tab A 8.0 2018 SM-T387 SM-T387W SM-T387V .It is Don't Fit Don't Fit For Samsung Galaxy Tab A 8.0 (2017) SM-T380 SM-T385..
  • ★ ATTENTION: The T387 Charging Port Don'T Include The Installation Instructions. Please Make Sure That You Can Repair It Before Buy The TAB A 8.0 2018 T387 Charging Port Flex Cable.The SM-T387V USB Port Flex Cable Is Replacement Part For Your Damage Or No Working SM-T387 Charging Connector Port Board Flex Cable For Samsung Galaxy Tab A 8.0 T387 Port Flex Cable Repair Part With Tools.
Check Stock

MMOBIEL Charging USB Port Replacement compatible with PlayStation PS4 Controller Dualshock 4 Model JDS-030 12 Pin Flex Cable Incl + Screwdriver

  • High Quality PlayStation USB charging port socket board adapter.
  • Model: JDS-030 with 12 pin flex ribbon cable. Replacement part for the wireless....
  • Compatibility: Only with Sony PlayStation PS4 CUH-12XX full series: CUH-1200 CUH-1200AB01 CUH-1200AB02 CUH-1215A CUH-1215B..
  • Kindly reminder: Sony has launched 5th edition of this DualShock 4 controller. Each model comes with a different built-in charger module. It is highly....
  • Package includes: 1x Micro-USB charging port socket JDS-030. 1x 12 Pin flex ribbon cable. 1x (+) Screwdriver. Professional installation is....
  • High Quality Product all Items tested before shipment. Item in Stock..
Check Stock

BIGTREETECH Octopus V1.1 32Bit Control Board + TFT35 E3 V3.0 Touch Screen+ 8PCS TMC2209 v1.2 Stepper Motor Driver DIY Voron 3D Printer Controllers for Raspberry Pi Model

  • 5MP camera module for 3D printer projects with Raspberry Pi, natively compatible with the official Raspberry Pi camera modules and motherboards.
  • Used on OctoPi, Raspbian, MotionEye for 3D printer monitoring, surveillance camera or other Pi cam projects.
  • 100cm/3.28ft extension cable included, long enough for mounting the camera, especially useful when you don’t want to place the camera near the....
  • Work on raspicam commands and python scripts as you would expect for a new project or drop-in replacement.
  • Package includes 2 flex ribbon cables (15cm/100cm) for Raspberry Pi A&B series. Cable for Pi zero is not included. Search ASIN B087FDJ2RP to get 100cm....
Check Stock

USB Charging Port Socket Board JDS-040 JDS 040 for Sony Playstion 4 PS4 Controller + 12 Pin Ribbon Cable

  • Support model : Sony Playstion 4 PS4 (4th Generation DualShock 4).
  • Replace Your Damaged PS4 USB Charging Port Socket Board JDS-040 with 12 Pin Cable.
  • Package include:1 X Charging Port Board + 1 X Flex Cable+ 1 X Screwdriver.
  • Handle Line Flex Cable with USB Port (Handle line Ribbon).
Check Stock

MELIFE Octoprint Octopi Webcam Mini Camera Video Module 5 Megapixels Monitor 3D Printer with 3.28FT/100CM Long Extension Flex Ribbon Cable for Raspberry Pi A/B/A+/B+, 2, 3, 3B+

  • 5MP camera module for 3D printer projects with Raspberry Pi, natively compatible with the official Raspberry Pi camera modules and motherboards..
  • Come with extra 100cm/3.28ft extension cable, long enough for mounting the camera, especially useful when you don¡¯t want to place the camera near the Raspberry Pi..
  • Work on raspicam commands and python scripts as you would expect for a new project or drop-in replacement..
  • Used on OctoPi, Raspbian, MotionEye for 3D printer monitoring, surveillance camera or other Pi cam projects..
  • Package includes 2 flex ribbon cables (15cm/100cm) for Raspberry Pi A&B series and 1 5MP camera module. Cable for Pi zero is not included..
Check Stock

MMOBIEL Charging USB Port Replacement compatible with PlayStation PS4 Controller Dualshock 4 Model JDS-050 / JDS-055 12 Pin Flex Cable Incl + Screwdriver

  • High Quality PlayStation USB charging port socket board adapter.
  • Model: JDS-050 / JDS-055 with 12 pin flex ribbon cable. Replacement part for the....
  • Compatibility: Only with Sony PlayStation PS4 Pro CUH-7xxx Series: CUH-7000BB01, CUH-7000BB02, CUH-7015B, CUH-7100BB01, CUH-7100BB02, CUH-7100BA50,....
  • Kindly reminder: Sony has launched 5th edition of this DualShock 4 controller. Each model comes with a different built-in charger module. It is highly....
  • Package includes: 1x Micro-USB charging port socket JDS-050 / JDS-055. 1x 12 Pin flex ribbon cable. 1x (+) Screwdriver. Professional installation is....
  • High Quality Product all Items tested before shipment. Item in Stock..
Check Stock