Top Cam Clutch Bearing

Coast To Coast 619005 Hydraulic Clutch Bearing with Slave Cylinder

  • The Centerforce design applies proven principles of weight and centrifugal force to develop the increased clamping loads modern clutch facings require while maintaining easy pedal effort and eliminating old-style diaphragm “over-center” problems disastrous to high-performance engines..
  • To ensure the highest level of quality, every clutch design that Centerforce offers is run through a gauntlet of testing procedures. We continually monitor and evaluate clutch-holding capacity by utilizing specific friction materials and accurate Pressure Plate clamp-load measurements..
  • Centerforce uses the latest in CAD/CAM technology for all of our in/house product designs. This coupled with precise measurement and strict manufacturing control means you get parts right - the first time..
  • Centerforce regularly test components and materials through independent test labs to further ensure we not only meet, but also exceed industry standards..
  • Centerforce provides innovative leadership in clutch technology by creating patented processes like their DYAD multi-disc coupling system..
Check Stock

Coast To Coast 619004 Hydraulic Clutch Bearing with Slave Cylinder

  • The Centerforce design applies proven principles of weight and centrifugal force to develop the increased clamping loads modern clutch facings require while maintaining easy pedal effort and eliminating old-style diaphragm “over-center” problems disastrous to high-performance engines.
  • To ensure the highest level of quality every clutch design that Centerforce offers is run through a gauntlet of testing procedures We continually monitor and evaluate clutch-holding capacity by utilizing specific friction materials and accurate Pressure Plate clamp-load measurements.
  • Centerforce uses the latest in CAD/CAM technology for all of our in/house product designs This coupled with precise measurement and strict manufacturing control means you get parts right - the first time.
  • Centerforce regularly test components and materials through independent test labs to further ensure we not only meet but also exceed industry standards.
  • Centerforce provides innovative leadership in clutch technology by creating patented processes like their DYAD mutli-disc coupling system.
Check Stock

Powerbuilt Alltrade 648649 Kit 21 Clutch Pilot SAE/MM Tool Set Silver

  • Made to be the most reliable tools in the market today.
  • Tool set for aligning clutch components when installing a new clutch.
  • Aligns clutch plate and disc to pilot bearing.
  • Includes tapered cone clutch plate adapter and centering shaft.
  • Adapters included: 1.18/0.984-Inch, 17/15mm, 15.8/12mm, 0.874/0.812-Inch, 0.787/0.749-Inch, 0.718/0.668-Inch, 0.624/0.614-Inch and 0.590/0.561-Inch.
  • Kit 21 includes 8-Piece for aligning clutch components when installing a new clutch.
Check Stock

MIZUGIWA Sailboat Cam Cleat Kayak Anchor Cam Cleat Sailing Composite 2 Row Hardware (Normal)

  • Sailboat Cam Cleat Kayak Anchor Cam Cleat Sailing Composite 2 Row Hardware, Pack of 2.
  • Cam cleats sailing hardware is more reliable, better operation. Clamp the rope more easily.
  • Boat Cam Cleat Width:2.5"/63mm Height:1.1"/28mm Center to center holes:1.5"/38mm for rope diameter: 0.12"-0.47"(3-12mm).
  • Marine cam cleats Max working load: 66lbs Breaking load:1984bs. (width 64 mm, height28 mm. for rope diameter: 3-12mm.).
  • Cam Cleat Sailing Fast Entry Sailboat Equipment Composite 2 Row Matic Ball Bearing Cam Cleat Pilates Max Line Sizes 5/8".
Check Stock

Glixal High Performance Racing Clutch Assy with Clutch Bell for GY6 49cc 50cc 139QMA 139QMB Engine Scooter Moped ATV Go-Kart

  • Assembly Comes with 2000RPM Clutch Springs.
  • ID of bearing in clutch shoe assy: 12mm (6901RS).
  • Please Note: The exact performance of upgrade parts will be affected by many other factor.
Check Stock

Performance Tool W1157P SAE Clutch Alignment Tool

  • SAE shaft and bushings to fit 8 SAE pilot bearing sizes..
  • Plated aligning cone with graduated 1" and 1 1/8" diameters for "automatic" fit to most clutch plates..
  • W1158P shaft & bushings to fit 10 metric pilot bearing sizes. Tapered cone for all others..
  • Sizes SAE: .590, .612, .624, .668, .749, .786, .808 & .904".
  • Plated aligning cone with graduated diameters for "automatic" fit to most clutch plates..
Check Stock

SR Performance Clutch Alignment Tool; 10 Spline

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 1-3/4 inch O.D. shaft, 1 inch pilot, 10 splines.
Check Stock

Red Line 42904 V-Twin Primary Case Oil - Engine Oil 1 Quart Bottle

  • PRIMARY CASE OIL - For 1984-to-present V-Twin American motorcycle engines, including Evolution, Twin Cam, and aftermarket engines of similar design.
  • BOOSTS VEHICLE PERFORMANCE - Improves clutch operation while reducing wear and temperature, providing a longer clutch lifespan.
  • PERFORM & PROTECT - This product is for use in the primary chaincase with wet-diaphragm spring clutches. Perfect for Motorcycles, ATVs, and....
  • WHY RED LINE - Established in 1979, Red Line Products perform & protect better than any on the market. No compromises.
  • FRICTION BALANCED CASE OIL - Most synthetics are too slippery for clutch operation. Our V-Twin Primary Case Oil is a balanced oil limiting slip and....
Check Stock

Ugly Stik 0011-2612 GX2 Spinning Fishing Combo Medium 6-Ft - Quantity 1

  • 3 ball bearings plus one-way clutch instant??anti-reverse bearing for smoother gear feel and instant hook sets.
  • Reel??sizes 40 and 50 feature 2 ball bearings plus one-way clutch instant??anti-reverse bearing.
  • Machined double anodized aluminum spool with??oversized bail wire for improved durability.
Check Stock

Centerforce 50058 Centerforce ® Accessories, Clutch Alignment Tool \90-97 Honda Accord 2.2L 5-Spd\

  • The Centerforce design applies proven principles of weight and centrifugal force to develop the increased clamping loads modern clutch facings require while maintaining easy pedal effort and eliminating old-style diaphragm “over-center” problems disastrous to high-performance engines..
  • To ensure the highest level of quality, every clutch design that Centerforce offers is run through a gauntlet of testing procedures. We continually monitor and evaluate clutch-holding capacity by utilizing specific friction materials and accurate Pressure Plate clamp-load measurements..
  • Centerforce uses the latest in CAD/CAM technology for all of our in/house product designs. This coupled with precise measurement and strict manufacturing control means you get parts right - the first time..
  • Centerforce regularly test components and materials through independent test labs to further ensure we not only meet, but also exceed industry standards..
  • Centerforce provides innovative leadership in clutch technology by creating patented processes like their DYAD multi-disc coupling system..
Check Stock

Bishop Rotary Microangelo Rotary Tattoo Machine Cams and Bearings Kit

  • TATTOO MACHINE CAM BEARING – The Bishop Rotary Tattoo Machine Cam Kit is designed for the Bishop Rotary Microangelo Tattoo Machine. It allows you to easily adjust the stroke of your machine..
  • MAGNETIC EASY SNAP-ON – The cams for tattoo machines are magnetic and allow for an easy snap-on installation. The kit comes with one 3.5mm tattoo cam and one 4.2mm tattoo cam..
  • 3.5MM STROKE CAM– The 3.5 stroke tattoo cam is the standard stroke that comes with every Microangelo tattoo machine. It’s ideal for black and grey shading and for color packing and clean linework..
  • 4.2MM STROKE CAM – The 4.2 extra-long stroke tattoo cam is designed for solid color packing and tribal black tattooing. It’s also more effective at bold linework than the 3.5mm cam..
  • KIT INCLUDES – Microangelo Rotary Tattoo Machine Cams Bearings Kit includes 2 tattoo machine cams with bearings, 2 drive bars, 2 Allen keys, 2 O-rings, and 3 Snug-fit rubber nipples..
Check Stock

Dorman 14505 Clutch Alignment Tool Compatible with Select Models

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long.
Check Stock