Top Carbide Brazed Inserts

20 Pieces Carbide Turning Inserts TCMT110204 TCMT21.51 TCMT Insert Tain Coated CNC Lathe Inserts for Lathe Turning Tool Holder

  • Carbide Turning Inserts are made of high quality carbide material, not easy to rust and durable..
  • Carbide Inserts are hard and sharp, cutting faster and more efficient..
  • Suitable for turning and finishing machining steel, stainless steel, cast iron and non-ferrous metals materials..
  • 20 pieces gold carbide inserts in a plastic box, easy to store..
  • Size: TCMT110204 TCMT21.51, 3/32" Thick, 1/64" Radius, 7 degrees relief angle.
Check Stock

ASZLBYM SNR0013M16 CNC Lathe Internal Threading Boring Bar Turning Tool Holder With 10pcs 16IR AG60 Carbide turning insert

  • ♥Package includes ：1PC SNR0013M16 boring bar + 11PCS 16IR AG60 carbide thrading turning insert + 1PC T15 wrench.
  • ♥SNR0013M16 : overall length : 150mm=5.9inch , shank diameter : 13mm=0.51inch, cutting direction : internal thread right cutting.
  • ♥ Thredaing boring bar : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining..
  • ♥16IR AG60 carbide inserts : 16IR AG60 inserts are made of carbide and the coating material is TiN , processing pitch range : 0.5~3.0mm.
  • ♥16IR AG60 carbide inserts Can be used for processing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
Check Stock

Lenox Tools 1211932DGHS 32 Diamond Grit Hole Saw 2-Inch or 50.8mm red

  • LENOX Diamond hole saw has a brazed diamond edge for more holes in tile and stone.
  • Diamond-tip hole saw has a durable, robust design for greater versatility in tough applications.
  • Diamond-tipped hole saw cuts holes in less time than carbide-grit or carbide-tipped hole saws.
  • Round holes make removing plugs faster and easier.
  • Uses a 2L, 3L, 6L or 7L standard arbor or a 2L or 6L SNAP-BACK arbor.
Check Stock

2 T/C OLSEN HEGAR NEEDLE HOLDER 4.5\ + 5.5\ WITH TUNGSTEN CARBIDE INSERTS O.R PREMIUM GRADE(HTI BRAND)

  • T/C OLSEN HEGAR NEEDLE HOLDER 4.5" WITH TUNGSTEN CARBIDE INSERTS O.R PREMIUM GRADE ( HTI BRAND).
  • T/C OLSEN HEGAR NEEDLE HOLDER 5.5" WITH TUNGSTEN CARBIDE INSERTS O.R PREMIUM GRADE ( HTI BRAND).
Check Stock

OSCARBIDE 5/16

  • Mini Turning Tool holders with 1/16'' Shank, 5ps/set AL, AR, BL, BR, and E Tool Holders with 5 TCMT C-6 Inserts.
  • Multiple cutting surfaces available provide longer tool life,Carbide Inserts can be rotated to a new cutting edge without changing the position of the tool holder.
  • Positive rake cutting and built-in chip breaker groove,for Turning, Cutting, Facing, Boring, and Chamfering.
  • Carbide insert is coated with tin to provide long life and sharpness,higher temperatures than ordinary steel tools .turning tool holder is made of high-quality steel, coated with nickel for durability,moisture proof and resistant to rusting and corrosion..
  • 5pcs in a wooden case for safe storage, the carbide inserts replacement TCMT090204,please search the Asin B07SJX9YNR to buy it on amazon..
Check Stock

HHIP 3900-5259 AXA-16E Threading Holder (250-116)

  • Unique design allows you to use both sides for threading cuts.
  • Supplied with a fully adjustable carbide chip breaker and carbide Shims.
  • Two Triangular carbide inserts are included.
  • Interchangeable with Aloris and Dorian AXA Series.
  • Replacement inserts are part # 6004-6031.
Check Stock

ASZLBYM 21PCS 1/2\/12mm Shank Indexable Carbide Lathe Turning Insert Tool Holder Bit Set for Turning Grooving Threading Boring with Indexable Carbide Turning Insert CCMT21.51 DCMT 16ER 11IR MGMN200-G

  • ♥PACKAGE INCLUDES : 7 pieces 12mm / 1/2”shank indexable carbide lathe turning tool holders( SDNCN1212H07, SDJCR1212H07, SCLCR1212H06, SER1212H16, MGEHR1212-2, S12M-SCLCR06, SNR0012M11), 14 pieces indexable carbide inserts(CCMT21.51, DCMT21.51, 11IR A60, MGMN200-G, 16ER A60), 7 pieces wrenches..
  • ♥Each tool holder comes with a C6 TiN Coated indexable carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • ♥7 PIECES LATHE INSERT TOOL HOLDERS : the material of the holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, boring, facing, external grooving, etc..
  • ♥14 PIECES INDEXABLE CARBIDE INSERTS: the material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability..
Check Stock

KOWOOD PRO Flush Trim Router Bit(16 Flutes) 1/2\Shank,2\Cut Length

  • KOWOOD Pro flush trim router bit is designed specifically for professional trimming work.
  • This flush trim router bit features 16 individually brazed carbide tips in a compression design in order to eliminate chipping.
  • Multi blade technology can effectively improve work efficiency and tool life.
  • Quality construction, YG8 tungsten carbide blade provides a clean and accurated cut with durable powder coating finish.
  • ▲What You Get▲KOWOOD Pro Flush Trim Router Bit (16 Flutes) 1/2" Shank, 2" Cut Length * 1.
  • 12-Month Service Card. Our after-sales customer service is available at any time. Please feel free to contact us for help.
Check Stock

Carbide Grooving Inserts GTN-2 QC1402, Indexable Inserts Multilayer Tin Coated CNC Lathe Tool Inserts Cut-Off Tool, 5 Pieces

  • Carbide grooving inserts are made of high quality carbide material, not easy to rust and durable..
  • Carbide inserts are hard and sharp, cutting faster and more efficient..
  • Suitable for turning and finishing machining steel, stainless steel, cast iron and non-ferrous metals materials..
  • 5 pieces gold grooving inserts in a plastic box, easy to store..
Check Stock

ASZLBYM 3/4 Lathe Internal Boring Bar Turning Tool Holder S20R-MWLNR08 with Indexable Carbide Turning Insert WNMG432

  • ♥package : 1pc S20R-MWLNR08 boring bar+ 10pcs WNMG432 carbide insert + 1pc wrench..
  • ♥ S20R-MWLNR08 turning boring bar : the cutting direction：right hand , the turning tool bar is made of high-quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning tool bar, for long time use..
  • ♥WNMG432 carbide insert : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ♥The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
Check Stock

Walter 01V652 Tungsten Carbide Finishing Bur - 5/8 in X 3/16 in Double Cut Cone Bur with 1/4 in Shank Vibration Free Cutting Tools

  • Durable: made from high-grade tungsten carbide, the carbide bur is suitable for the toughest applications in a wide range of materials. The finishing bur is equipped with a shank for comfortable grip and easy handling.
  • Metal Removal: with perfect concentricity and balance, the cutting tool ensures safe and fast material removal. The double-cut carbide burr runs without vibration, thus providing maximum operator comfort.
  • Finishing Bur: the exclusive tooth design of the metallic burr makes it ideal for working in confined areas. Silver brazed shock absorber significantly reduces the impact on the grinder, preventing it from damage.
  • Double Cut: the surface finishing burr is ideal for use on steel, brass, bronze, cast iron, carbon fiber, plastics, hard rubber, weldments steel, titanium, and other metals. With greater back support, the carbide-cut bur performs well even in most detailed jobs.
  • Specifications: made in compliance with SL-5 USCTI, the tungsten carbide bur ensures safety at high speeds. This cone bur has a 5/8 in. diameter and 3/16 in. length with a 1/4 in. shank diameter.
Check Stock

ASZLBYM 3/8\ Lathe Threading Turning Tool Holder SER1010H11 with Indexable Carbide Threading Turning Insert 11ER A60 (3/8\ Holder + 11ER A60 Insert)

  • PACKAGE INCLUDES : You will receive 1 pieces SER1010H11 3/8”/10mm shank diameter lathe turning tool holder , 11pcs 11ER A60 threading carbide turning inserts and 1pc T8 wrench..
  • Material : The SER1010H11 3/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 3/8"*3/8"(10mm*10mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm..
  • Easy to store: the metal lathe cutting turning tool holder and threading carbide turning inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock