Top Carbide Insert Lathe Tool

Woodturning Carbide Lathe Tools 17” Full Size Wood Turning Tool Set of 3 Rougher Detailer Finisher Includes Replacement Cutter Inserts 6 pcs – Diamond Round and Square Screws and Key Star Wrenches

  • ✅ CARBIDE WOODTURNING TOOLS - Our lathe turning tools has greatly simplified wood turning, This set of carbide lathe tools is ideal for turners at any skill level, making woodturning fast and more enjoyable. Each lathe chisel features a carbide tip with multiple sharp edges that can be rotated several times, Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood..
  • ✅ CARBIDE TURNING TOOLS SET - Premium quality CNC machined from ½” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor.
  • ✅ ERGONOMICS TOOL HANDLE - Hard and Solid beech wood，Ergonomics design makes it more comfortable while doing turning job. Unlike the aluminum handle wood turning tool on the market which comes with only one handle, which means you have to change out the bar every time you want to switch tools..
  • ✅ WOODTURNING TOOLS & ACCESSORIES - Set includes 3 turning tools : rougher tip – Square 15 x 15 x 2.5mm R50, detailer tip – Diamond 10x28m with Radius point , finisher, with extra sets of carbide inserts. Set comes with extra replaceable carbide insert: 3 Sets of indexable Re....
Check Stock

Hollower Swan Neck Woodturning Lathe Tipped Tool Bended Lathe Chisel Tool Hollower with 12mm Round Carbide Insert and a Screw and star key wrench for wood hobbyist or DIY or carpenter, RC-12

  • ✅ CARBIDE WOODTURNING TOOLS - Our lathe turning tools has greatly simplified wood turning, This set of carbide lathe tools is ideal for turners at any skill level, making woodturning fast and more enjoyable. Each lathe chisel features a carbide tip with multiple sharp edges that can be rotated several times, Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood..
  • ✅ CARBIDE TURNING TOOLS SET - Premium quality CNC machined from ½” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor.
  • ✅ ERGONOMICS TOOL HANDLE - Hard and Solid beech wood，Ergonomics design makes it more comfortable while doing turning job. Unlike the aluminum handle wood turning tool on the market which comes with only one handle, which means you have to change out the bar every time you want to switch tools..
  • ✅ WOODTURNING TOOLS & ACCESSORIES - Set includes 3 turning tools : rougher tip – Square 15 x 15 x 2.5mm R50, detailer tip – Diamond 10x28m with Radius point , finisher, with extra sets of carbide inserts. Set comes with extra replaceable carbide insert: 3 Sets of inde....
Check Stock

YUFUTOL Carbide Tipped Wood Turning tools Lathe set （Finisher/Rougher/Detailer/Hollower Swan Neck Hollower with Solid Wood Handle）and Diamond/Round/Square Carbide Inserts

  • 【Upgraded Carbide Turning Tools Material】High-density tungsten carbide blades are made with high-speed steel blade material which will not wear off easily, stainless steel aluminum handles and a beautiful aluminum alloy case with sponge liner, excellent ergonomics and reliable grip, increased stability and shock resistance.
  • 【Adjustable Aluminum Handle Length】You can freely adjust the length of wood turning tools for lathe according to your preference, just fasten the two screws of the lathe turning tools with the accessory wrench then you can work which is convenient and flexible.
  • 【Replaceable Carbide Blade&Adjustable Sharpe Edges】Our carbide lathe tools matching carbide blades can be replaceable and we provide you with new cutting inserts and maximize cutting life. Each lathe chisel has a tungsten carbide tip with a rotatable, sharp edge. Once the edge becomes dull, you can always rotate the bit to get a new, sharper edge.
  • 【Carbide Lathe Tools Package】You will get 11" tool handle*1, 9.8" connected handle extension*1, 9.8"round turning tool*1, 9.8"diamond turning tool*1, 9.8"square turning tool*1, 9.8"r-shape turning tool*1, interchangeable carbide inserts*8, T15 wrench*1, allen wrench*1,screw*2, aluminum protective case with high elasti....
Check Stock

Simple Woodturning Tools Carbide Lathe Turning Tool Set of 3 Full Size with 17 Foam Grip Handles USA Made

  • American Made Set of 3 Full Size Carbide Lathe Turning Tools with Color Coded Handles: Hollower, Detailer & Rougher.
  • 17" long solid aluminum foam grip tool handles are color coded for easy tool identification. Overall tool & handle length is 26.5"..
  • This set of carbide lathe tools is ideal for turners at any skill level. With carbide it's all turning and no sharpening so you can begin turning....
  • Each lathe tool is 1/2" square CNC machined by Harrison Specialties in Ramsey, Minnesota. These tools are designed to be kept flat on the tool rest....
  • Each lathe tool features a carbide tip with multiple sharp edges that can be rotated several times. A Torx star wrench is included..
Check Stock

Hurricane Turning Tools, HSS, 3 Piece Bowl Gouge Set (1/4\

  • ...the tool frame contact is not easy to roll,1.15 pounds of solid aluminum bar handle to minimize the phenomenon of warping,the handle of the frosted sense of control more to let you handle any product details with ease..
  • 【LONG SERVICE LIFE】 - Weighing 1.15 pounds of solid aluminum bar handle,high-density tungsten carbide cutting head,high-speed steel blade material,such carbide lathe tools suitable for all levels of woodturners,woodworkers and DIY players,according to the ergonomic logic of the development of the lathe turning tools so that you grasp more firmly,its fearless wear and tear characteristics are destined to leave only the medal of honor on the product with your common struggle..
Check Stock

OSCARBIDE Carbide Turning Inserts MGMN200,11ER A60,WCMT2.5,CCMT060204,DCMT070204 CNC Lathe Insert for Indexable Lathe Turning Tool Holder Insert Replacement 7 Pieces

  • Insert: Grooving Insert MGMN200,External Threading Inserts 11ER A60 ,Turning Insert WCMT050304(WCMT2.521),CCMT060204(CCMT21.51),DCMT070204(DCMT21.51).
  • Material: made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Designed for Steel, cast iron and non-ferrous materials.
  • Used for turning and finishing on a wide range of materials.
  • 7 pieces Carbide inserts for replace our 1/2” or 3/8” Lathe turning tool holder set , or other brand same size holder, you can search Asin: B07PLYG1Y4 or B07MDC5LMX and buy tool holders.
Check Stock

OSCARBIDE 1/2\ Shank Nickel Plated Indexable Lathe Turning Tool Holder 7 Pieces/Set,CNC Heavy-Duty Metal Lathe Cutting Tools for Turning Grooving Threading Parting Cut Off Holders Set

  • ❤This carbide lathe turning set Includes two 95° bits (SCLCR 3/8-2 and SCLCL 3/8-2), one 93° bit (SDJCR 3/8-2), one 90° bit (SWGCR 3/8-2.5), one 62.5° bit (SDNCN 3/8-2), one flat threading bit (SER 3/8-2) and one grooving bit (MGEHR 3/8-2). Recommend for CNC and traditional milling machines..
  • ❤Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general metal lathe cutting tools. The set is used for semi-finishing/roughing steel , metal , great for turning, grooving or threading..
  • ❤Each tool holder comes with a TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action. And swap out or rotate the indexable carbide tips to maintain a sharp and precise cut..
  • ❤Metal lathe accessories designed for easy material removal, perfect for aluminum, brass, bronze, cast iron, steel, stainless steel, plastic, titanium and more.The entire set is contained in a premuim aluminium storage case that protects and organizes each tool and stacks and stores easily..
  • ❤TJATSE is a leading manufacturer of production cutting tools for industry. Our goal is to provide to our customers cutting tools that are On Spec and On Time and tha....
Check Stock

OSCARBIDE Carbide Turning Inserts 10 Pieces/Pack,MGMN200,11ER A60,GTN-2,WCMT050304,CCMT060204,DCMT070204 CNC Lathe Carbide Insert for 1/2\ Shank Indexable Lathe Turning Tool Holder Insert Replacement

  • Insert: Grooving Insert MGMN200,External Threading Inserts 11ER A60 ,Turning Insert WCMT050304(WCMT2.521),GTN-2(QC1402),CCMT060204(CCMT21.51),DCMT070204(DCMT21.51),SCMT060204(SCMT21.51).
  • Material: made of solid carbide with Tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Designed for Steel, cast iron and non-ferrous materials.
  • Used for turning and finishing on a wide range of materials.
  • 10 pieces Carbide inserts for replace our 1/2” Lathe turning tool holder set , or other brand same size holder, you can search Asin:B086PTB3K3 and buy tool holders.
Check Stock

The Lathe Of Heaven

  • The VINWOX Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The VINWOX Carbide Lathe Tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head. Start your easy wood turning on your Wood Lathe with VINWOX Carbide Turning tools now.
  • Including One set Replaceable Carbide Tip Insert installed on chisel. Rougher: 11.1x11.1x1.75mm 4 sided Square Shape Carbide Tip. Finisher: 12mm Diameter Round Shape Carbide Tip. Detailer: 28x10mm Diamond shape Carbide Tip. Peach Square Radius: 11.3x11.3x1.75mm with 4 sided 2" Arc Square Radius Carbide Tip. Blade images on product picture are only for Clear Vision..
  • 1/2/3/4 Indexed Carbide tip design always offer sharpest edge for turning and maximum cutting life.
  • Top quality and Long cutting life Guaranteed.
Check Stock

OSCARBIDE Carbide Turning Inserts MGMN300,16ER A60,WCMT06T304,CCMT09T304,DCMT11T304 CNC Lathe Insert for 5/8\ or 3/4\ Indexable Lathe Turning Tool Holder Insert Replacement, 7 Pieces

  • Insert: Grooving Insert MGMN300,External Threading Inserts 16ER A60 ,Turning Insert WC32.51（WCMT06T304),CC32.51 (CCMT09T304), DC32.51(DCMT11T304).
  • Material: made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Designed for Steel, cast iron and non-ferrous materials.
  • Used for turning and finishing on a wide range of materials.
  • 7 pieces Carbide inserts for replace our 5/8” or 3/4" Lathe turning tool holder set,or other brand same size holder, you can search Asin:B07RBPHTZR or B07S9DDL6X buy tool holders.
Check Stock

DEEFIINE Carbide Tipped Wood Lathe Turning Tools Set, Lathe Rougher Finisher Swan Neck Hollowing Tools and Interchangeable 19.5"Soft Grip Handle with Diamond Round Square Carbide Inserts

  • Sharp and easy: Our carbide turning tools set can be used to quickly process any workpiece on your lathe. The wood lathe tool set can provide a smooth and clean cutting effect by four types of cutters designed for different grinding effects. This saves a lot of time when grinding and honing, because you can easily replace the blade when it becomes dull..
  • wood turning Tool kit: The high-quality CNC machining made of square stainless steel makes it stronger, harder and rolls less than round shaft tools. It has a square shaft so that the knife can be used with a flat back. Keep the shelf flat and flush with the floor。.
  • Ergonomic design: the turning tool kit is equipped with soft handle, fits comfortably in the hand，It has the characteristics of anti-skid, breathable, shock absorption, etc.
  • Easy to use: our woodturning tool makes the turning of wood considerably easier. This set of carbide rotary tools is very suitable for all levels of experience and makes wood turning faster and more interesting. Each lathe tool has two carbide tips with multiple sharp edges that can be rotated multiple times. Simply turn the knife head a....
Check Stock

iCarbide 3/4 Shank Indexable Boring Bar 6pcs Set with 6pcs Carbide Inserts

  • Sclcr Boring Bar 1-1/2" Shank Diameter, Overall Length 14”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • OSCARBIDE boring bars Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT120408( CCMT432) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • For semi-finishing and finishing operations.
Check Stock