Top Carbide Insert Reamers

04529 for PPRK6 Plastic Pipe Fitting Reamer 6 Piece Kit fit into standard 1/2" drills PVC pipe reamer tool Contains PPR75, PPR100, PPR150, PPR200, PPR300 and PPR400

  • ...e labor time and materials costs by reusing the fittings..
  • 【Set combination】：Kit with PPR75, PPR100, PPR150, PPR200, PPR300, PPR400, 6 Piece,Fits into standard 1/2 inch drill.Shaft Size: 3/8" hex..
  • 【Advantage】：Its carbide cutting insert provides a cutting edge on each side.Rotate before replacement and receive three bonus cutting edges.Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems..
  • 【Professional customization】: Specially designed for North American pipe diameters, So they as they fit specific ID/OD for reaming work.It is made of the latest hard alloy with high strength,high precision, durability and long service life. The surface is not easy to rust after coating treatment..
  • 【100% Satisfaction Guarantee】: Your satisfaction is our top priority, We strive to provide customers with quality services.If you're not 100% satisfied with this tool set, simply return it for a full refund in 30 days. Premium Support & 12-Mo....
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56018P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

15/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56069P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #3, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56068P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

13/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56065P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 3/8 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1 3/16\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56026P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 3/4 " flute length, Partial Flute Length Carbide.
  • 1" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1 7/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56080P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 2" flute length, Partial Flute Length Carbide.
  • Morse taper shank #4, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

OSCARBIDE Carbide Inserts TPG322 Turning Inserts TPGN160308,Tin Coated for Lathes and Mills,10 Pieces/Box.

  • Indexable Carbide Milling Insert 1/8" Thick, 1/32" Radius,11 degree relief angle..
  • Carbide Cutters material: made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance.
  • Carbide Bits for turning and milling carbon and alloy steels, tools steel and stainless steel.
  • Screw on triangle style insert with a chip breake.
  • 10 pieces per box, provides longer tool life than uncoated grades.
Check Stock

Accusize Industrial Tools 1/4\ x 3/8'' Cut-Off Holder, Parting Tool, Mgehr04-2 of 2387-2001 with 10 Carbide Inserts for Cutting Steel, 2387-0001ins

  • Insert model for this holder: Carbide insert TiN Coated MGMN200 Double End Cut-off.
  • MGMN-2 Double End Carbide Cut-Off Insert.
Check Stock

1 5/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56078P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 7/8 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #4, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

ASZLBYM 3/8\ Lathe Threading Turning Tool Holder SER1010H11 with Indexable Carbide Threading Turning Insert 11ER A60 (3/8\ Holder + 11ER A60 Insert)

  • PACKAGE INCLUDES : You will receive 1 pieces SER1010H11 3/8”/10mm shank diameter lathe turning tool holder , 11pcs 11ER A60 threading carbide turning inserts and 1pc T8 wrench..
  • Material : The SER1010H11 3/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 3/8"*3/8"(10mm*10mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm..
  • Easy to store: the metal lathe cutting turning tool holder and threading carbide turning inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock

Accusize Industrial Tools 7 Pieces/Set 1/2'' Indexable Carbide Turning Tool Set in Fitted Box, 2387-2004

  • 7 piece indexable carbide lathe turning tool set. Shank size: 1/2 inch x 1/2 inch. Overall Length: 4".
  • Model of each holder & the original insert: MGEHR08-2J (insert: MGMN200-M).
  • Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, parting, part-off, finish turning, facing, external grooving, etc..
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.Insert screw and wrench included.
  • *** Insert kit Item#: 2387-2004INSERTS (Sold Separately on Amazon)***.
Check Stock