Top Carbide Tipped Chucking Reamer

uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H8 Tolerance (2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm) 9pcs

  • Chucking Reamer: Size: 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm.
  • tolerance: H8. Features just the base substrate without any additional coatings, good for wide ranges of applications.
  • Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
  • Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
  • Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
  • How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check Stock

uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H8 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm) 10pcs

  • Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm.
  • tolerance: H8. Features just the base substrate without any additional coatings, good for wide ranges of applications.
  • Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
  • Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
  • Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
  • How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check Stock

8pcs Reamer Set, HSS H8 Straight Shank Chucking Machine Cutter Milling Reamer Kit 3/4/5/6/7/8/9/10mm

  • Type- Straight Flute Chucking Reamer Bits.
  • Application- Widely used for bore machining, installed in drilling machine, milling machine, etc.
  • Processed surface of iron, plastic, wood, copper, aluminum and other soft materials.
  • Quantity- 10 Pieces. Shank Diameter-3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm.
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56018P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

15/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56069P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #3, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56068P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 1/2 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

13/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56065P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 3/8 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1 3/16\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56026P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 3/4 " flute length, Partial Flute Length Carbide.
  • 1" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1 7/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56080P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 2" flute length, Partial Flute Length Carbide.
  • Morse taper shank #4, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1 5/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56078P, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 1 7/8 " flute length, Partial Flute Length Carbide.
  • Morse taper shank #4, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

IRWIN Tools Polycrystalline Diamond-Tipped Fiber Cement Circular Saw Blade, 7 1/4-inch, 4-Tooth (4935473)

  • Polycrystalline, diamond-tipped teeth provide longer circular saw blade life.
  • Circular saw blades last up to 15x longer compared to standard carbide-fiber cement blades.
  • Circular saw blade creates less dust compared to a standard carbide-fiber cement blade.
  • Cuts up to 9,000' or 5 stacks of fiber cement.
Check Stock

HLOFIZI 6 Inch Hole Saw Tungsten Carbide Tipped for Recessed Lights, Drilling Metal, Hardwood, Nail-Embedded Wood, Stucco and Wire Mesh Combination, Plaster, Cement Fiber Board

  • Tungsten carbide tipped teeth for extended cutting life, drilling clean holes, more efficiently. Up 10X longer life that 6” bi-metal hole saw.
  • Drills clean wood, wood with nails, hardy board, aluminum, metal, cast iron, stainless steel sheet, cement fiber board, sheetrock, plastic, fiberglass. Also Ideal for recessed lights.
  • Carbide tooth makes cutting holes through stucco/plaster and wire mesh combination, wood and metal combination, faster and easier with less effort.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Arbor: fit 3/8" chuck.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 6 in. carbide tipped hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock