Top Carbon Fiber Tape Carbon

WODOFO GDR Soft Carbon Fiber Car Control Gear Box Shift Knob Panel Frame Cover Sticker Interior Trim Compatible with BMW E90 E92 E93 3 Series 2005-2012 323 325 328 330 335

  • Durable & Protection: Soft Carbon Fiber Gear frame sticker is durable and prevents your car from finger nails and keys scratches. Covering the existing scratches.This cover trim is sturdy, rustless and scratch-resistant, to ensure maximum strength and durability for long lasting usage..
  • Decoration:Special carbon fiber sticker decoration parts that keep your vehicle unique and classy, instant upgrade the appearance.Freshen up the interior of your car with this car sticker accessories..
  • Easy installation: There is Double-sided tape inside.Install Carefully: Let the two sided adhesive tape set for at least an hour before doing anything but press straight down on the control gear shift panel cover. Held each cover firmly against the surface for 23 seconds after initial placement before moving on to the next, to assure flush and permanent installation..
  • Good choice for Christmas gift and New Year present..
Check Stock

Acmex Rear Spoiler Fits for 2012-2018 BMW F30 3 Series Sedan & 2014-2019 F80 M3 Sedan, M4 Style Trunk Spoiler Wing for 320i 325i 328i 330i 335i 340i(Carbon Fiber)

  • ★【FITMENT 】This rear spoiler is compatible with 2012-2018 F30 3 Series Sedan 4DOOR & 2014-2019 F80 M3 Sedan 4 DOOR Check the fitment picture carefully before to ensure proper fit your vehicle..
  • ★【MATERIAL】 This rear trunk spoiler is made of top-grade ABS plastic with a polished surface and UV-Protected clear coating. Lightweight and streamlined design helps to reduce wind resistance, promote motion appearance, improve driving stability and safety..
  • ★【CARBON FIBRE STYLE】Use hydrographic transfer printing technology to get a carbon looking, the material is not real carbon fiber but with a carbon fiber style looking. This spoiler can also make your car more luxurious..
  • ★【M4 Type Spoiler】: Will dramatically improve the sporty appearance of your car. The new spoiler works fine and enhances overall performance in handling and durability. Add more downforce and help aerodynamic..
  • ★【Quick Installation】: The double-sided tape is already attached to the spoiler. Peel off the tape on the back then stick the spoiler on the lid of the trunk. Very easy and quick installation without drilling or modification..
Check Stock

Jie Norman Rear Lip Bumper Diffuser Carbon Fiber Style Fits 2018-2023 Infiniti Q50 Bumper Cover Lower Lip Spoiler Valance Protector W/LED

  • Fit for 2018 2019 2020 2021 2023 Q50 Sedan.
  • Made of Light Weight & Top-Grade Durable Polypropylene Material.
  • Hydrographics transfer printing. The material is not the carbon fiber, but with a carbon fiber style looking..
  • Easy installation. Just use the double-sided adhesive tape to finish installation or Bolt-on installation. With 3M tape, screws don't include..
  • If you have any quality problems, please contact us as soon as possible..
Check Stock

Jstotrim Carbon Fiber Seat Adjustment Wrench Cover Trim For Dodge Challenger 2011+

  • Compatible - Perfect fit for 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 Dodge Challenger.
  • Design Style - Provides a high class and sport decor style for your Dodge Challenger, this trim can cover existing scratches and prevent your Challenger from scratch and abrasion..
  • Material - Made of high quality ABS plastic material , Three-layer processing: 1/Background black paint, 2/carbon fiber pattern paint,3/Transparent UV in great finished with great luster (not Real carbon fiber).
  • Easy Installation - With Double-sided adhesive tape on back side, please clean the surface with Alcohol frist, heat the tape by a hair dryer for better adhesion,and press it more than 1 minute.
  • Satisfaction Guarantee - If you're not 100% feel satisfied with your Challenger, return it for a full refund in 30 days, no questions asked money back.
Check Stock

RT-TCZ Carbon Fiber Fuel Filler Door Gas Tank Cap Cover Accessories for 2017 2018 2019 2020 2021 2023 Chevrolet Camaro

  • 【PERFECT FITMENT】Fit for Chevrolet Camaro 2017 2018 2019 2020 2021 2023.
  • 【HIGH QUALITY】Made of high quality ABS plastic, sturdy and durable.Will not fade and crack when driving.
  • 【CARBON FIBER GRAIN】Carbon fiber grain design, made your car looks more fancy and sporty, performs like a racing car when you driving.
  • 【EASY INSTALLATION】Easy installation with self-adhesive tape, fit quite tight and nice (Do a little cleaning and heat the tape a little before installation will help the cover stick in place better).
  • 【WARRANTY】Admission to 30 days free of charge returned & 365 days replacement.
Check Stock

Acouto Carbon Fiber Center Console Trim for Nissan GTR R35 08‑16, 2Pcs/Set Carbon Fiber Central Control Navigation Trim Cover Car Interior Decoration Accessories

  • For GTR R35---- Car Interior Center Console Navigation Trim Frame is suitable for Nissan GTR R35 08‑16, with accurate key positions and perfect lines. Please confirm whether the product is suitable before purchasing.
  • High Quality Carbon Fiber---- The center console navigation trim is made of high‑quality carbon fiber material, which is rustproof, colorfast, durable and wear‑resistant also has long service life, easy to clean and maintain.
  • Exquisite Workmanship---- Fine surface treatment can create a glossy appearance, adding a sense of luxury and elegance. Carbon fiber style brings elegant and luxurious feeling. Sophisticated production provides excellent quality, are the excellent interior decoration, can completely fit your car.
  • Additional Protection---- The carbon fiber central control navigation trim can cover the original scratch, but also can prevent the console panel from dust and scratch, prevent the erosion of oil and sweat, so that the vehicle is always as new as before.
  • Self Adhesive Design---- Simple paste installation, convenient to mount, with self adhesive tape in the back, no drilling and tools are required, will not damage your car, and can be attached firmly. Please keep the surface clean and dry before installation.
Check Stock

Spurtar Rear Spoiler 4.9ft (150cm), Universal Car Trunk Spoiler Roof Lip Kit with Glossy Black Carbon Fiber Pattern fits Most Cars, Punch-Free Installation

  • ENVIRONMENTAL: Spurtar 3D carbon fiber rear spoiler creates better aerodynamic effect and geometry to your sports car. Vehicles with 3D front spoiler, roof wing, rear spoiler are economical, safety and environmental..
  • MATERIAL: Made of High Quality soft rubber material with carbon fiber surface with a glossy and bright finishing. Any bending, trimming, free cutting, matching makes it is ideal spoilers for cars. Comes with double sided tape and two end pieces for easy installation (no tools required).
  • SIZE: Length at 4.9 feet (150cm/1.5m) 4.9' x 1.75" x .875" long, Come with double-sided tape on back (extra security for the larger width 1.75" 45mm). Features easy peel and stick on installation.
  • QUICK AND EASY: Spurtar Carbon Fiber Spoiler is easy to bend, trim arc and glue. Firstly, measure the location and (if need) trim the Spoiler at the size of the choosen position. Two end-caps are included to seal the cutted ends! Clean the location from dirt, sand and dust and glue at the choosen location.
  • ONE SIZE FITS ALL: Spurtar Car Spoiler fits for most of the cars. Give your car the sturdy and sports look..
Check Stock

Orion Carbon Fiber Hood 60' x 80' Wrap Film Twill Vinyl Sheet Roll - 3D Carbon Fiber

  • These are by far the most popular 3D Twill-Weave Carbon fiber style vinyl sheet, without the high cost of actual carbon fiber. This unique product is made of UV resistant vinyl that features a carbon textured finish.
  • Unlike those cheap carbon pattern printed, there are true 3D texture resembles the genuine look of dry carbon fiber, the weave reflects light the same way as the actual carbon fiber would. Just use your imagination, this carbon fiber style sheet will transform anything you want into a stylish carbon fiber look without spending the carbon fiber price..
  • Simply apply this high quality 3D carbon fiber style vinyl sheet to anything surface.
  • Each weave is about 0.20 inches and the sheet thickness is about 0.015 inches. 1 inch = 25.4 millimetres.
  • Self-adhesive, easy apply. Stretchable with heat. Water resistant. Easily cleansed with water. Long lasting..
Check Stock

Jie Norman Rear Bumper Diffuser W/ LED Carbon Fiber Style Fits 2014-2017 Infiniti Q50 Lower Bumper Lip Spoiler Valance Protector

  • Fit for 2014-2017 Infiniti Q50 all 4 Door Sedan models. Will Not Fit 2018 and Up Models.
  • Come with brake led light, the red lighting is eye-catching, ensure the safety of the drive..
  • Made of top-grade Durable PP material. The material is not the carbon fiber, but with a carbon fiber style looking..
  • Easy installation. Just use the double-sided adhesive tape to finish installation or Bolt-on installation. With 3M tape, screws don't include..
  • If you have any quality problems, please contact us as soon as possible..
Check Stock

Acmex Rear Spoiler Wing Fits for 2008-2012 BMW E90 M3 Sedan & 2006-2011 E90 3 Series Sedan Trunk M4 Style 323i 325i 325xi 328i 328i xDrive 330i 330xi 335i 335d 335i xDrive M3 (Carbon Fiber)

  • ★【FITMENT 】This rear spoiler is compatible with 2006-2011 E90 3 SERIES Sedan 4 DOOR & 2008-2012 M3 Sedan 4 DOOR. Check the fitment picture carefully before to ensure proper fit your vehicle..
  • ★【MATERIAL】 This rear trunk spoiler is made of top-grade ABS plastic with a polished surface and UV-Protected clear coating. Lightweight and streamlined design helps to reduce wind resistance, promote motion appearance, improve driving stability and safety..
  • ★【CARBON FIBRE STYLE】Use hydrographic transfer printing technology to get a carbon looking, the material is not real carbon fiber but with a carbon fiber style looking. This spoiler can also make your car more luxurious..
  • ★【M4 Type Spoiler】: Will dramatically improve the sporty appearance of your car. The new spoiler works fine and enhances overall performance in handling and durability. Add more downforce and help aerodynamic..
  • ★【Quick Installation】: The double-sided tape is already attached to the spoiler. Peel off the tape on the back then stick the spoiler on the lid of the trunk. Very easy and quick installation without drilling or modification..
Check Stock

F & B LED LIGHTS Silver 3D Carbon Fiber Film Twill Weave Vinyl Sheet Roll Wrap (12' X 60', Silver)

  • These are by far the most popular 3D Twill-Weave Carbon fiber style vinyl sheet, without the high cost of actual carbon fiber. This unique product is made of UV resistant vinyl that features a carbon textured finish..
  • Unlike those cheap carbon pattern printed, there are true 3D texture resembles the genuine look of dry carbon fiber, the weave reflects light the same way as the actual carbon fiber would. Just use your imagination, this carbon fiber style sheet will transform anything you want into a stylish carbon fiber look without spending the carbon fiber price..
  • Simply apply this high quality 3D carbon fiber style vinyl sheet to anything surface..
  • Each weave is about 0.20 inches and the sheet thickness is about 0.015 inches. 1 inch = 25.4 millimetres.
  • Self-adhesive, easy apply. Stretchable with heat. Water resistant. Easily cleansed with water. Long lasting..
Check Stock

DIYAH 3D Yellow Carbon Fiber Film Twill Weave Vinyl Sheet Roll Wrap DIY Decals 12' X 60' (1FT X 5FT)

  • These are by far the most popular 3D Twill-Weave Carbon fiber style vinyl sheet, without the high cost of actual carbon fiber. This unique product is made of UV resistant vinyl that features a carbon textured finish..
  • Unlike those cheap carbon pattern printed, there are true 3D texture resembles the genuine look of dry carbon fiber, the weave reflects light the same way as the actual carbon fiber would. Just use your imagination, this carbon fiber style sheet will transform anything you want into a stylish carbon fiber look without spending the carbon fiber price..
  • Simply apply this high quality 3D carbon fiber style vinyl sheet to anything surface..
  • Each weave is about 0.20 inches and the sheet thickness is about 0.015 inches. 1 inch = 25.4 millimetres.
  • Self-adhesive, easy apply. Stretchable with heat. Water resistant. Easily cleansed with water. Long lasting..
Check Stock