Top Cast Bushing
Kluson Revolution 3X3 Locking Tuners, Keystone Buttons - NICKEL
- Kluson Revolution 19:1 'Gibson' mount Locking tuners in Nickel with Pearloid Keystone buttons, Vintage style KEDPL-3801N.
- Drop-in upgrade for instruments with Gibson style 2 hole mount and modern 25/64" or 10 mm) peghead hole. These normally use a screw in hex head bushing rather than a press in bushing..
- Introducing the NEW Kluson Revolution G-mount 19:1 high ratio tuning machine. Kluson has truly introduced a game changer with the traditional footprint and newly designed sealed die-cast housing. These state of the art tuners are designed to directly retrofit tuners with a screw-in hex head bushing, traditional Kluson two-screw mounting pattern and modern 25/64" peghole. The vintage outline, pearloid keystone button and pin-stripes pay tribute to Kluson heritage while adding a rear knob locking.
- SportHiTech are authorized Kluson dealers, and all products are factory-fresh and carry full manufacturer warranty, and are shipped in original retail packaging..
Check StockTuner - Kluson, Revolution G Mount, Pearloid Button, 3/side, Color: Nickel
- Kluson Revolution 19:1 'Gibson' mount with pearloid buttons, Vintage style KEDP-3801N.
- Drop-in upgrade for instruments with Gibson style 2 hole mount and modern 25/64" or 10 mm) peghead hole. These normally use a screw in hex head bushing rather than a press in bushing..
- Introducing the NEW Kluson Revolution G-mount 19:1 high ratio tuning machine. Kluson has truly introduced a game changer with the traditional footprint and newly designed sealed die-cast housing. These state of the art tuners are designed to directly retrofit tuners with a screw-in hex head bushing, traditional Kluson two-screw mounting pattern and modern 25/64" peghole. The vintage outline, pearloid plastic keystone button and pin-stripes pay tribute to Kluson heritage while the brand new.
- SportHiTech are authorized Kluson dealers, and all products are factory-fresh and carry full manufacturer warranty, and are shipped in original retail packaging..
Check StockMartin SDS 2 Quick Disconnect Bushing, Ductile Iron, Inch, 2\ Bore, 2.187\ OD, 1.37\ Length
- Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Split through flange and taper to provide strong clamping on the shaft.
- Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check StockKluson Revolution Tuners 3x3 No Collar Locking Pearloid button Nickel KEDPNCL3-N
- Kluson Revolution 19:1 'Gibson' mount with pearloid buttons, Locking Vintage style Nickel KEDPNCL3-N.
- For the first time, a locking drop-in upgrade for instruments with Gibson style 2 hole mount and vintage (11/32" or 8.7mm) peghead hole. These normally use a press-in bushing rather than a screw in bushing..
- Introducing the NEW Kluson Revolution G-mount 19:1 high ratio tuning machine. Kluson has truly introduced a game changer with the traditional footprint and newly designed sealed die-cast housing. These state of the art tuners are designed to directly retrofit vintage tuners with a push-in bushing, traditional Kluson two-screw mounting pattern and vintage 11/32 inch peghole. The vintage outline, pearloid plastic keystone button and pin-stripes pay tribute to Kluson heritage while the brand new.
- SportHiTech are authorized Kluson dealers, and all products are factory-fresh and carry full manufacturer warranty, and are shipped in original retail packaging..
Check StockKluson Revolution Tuners 3x3 No Collar Locking Pearloid button Gold KEDPNCL3-G
- Kluson Revolution 19:1 'Gibson' mount with pearloid buttons, Locking Vintage style Gold KEDPNCL3-G.
- For the first time, a locking drop-in upgrade for instruments with Gibson style 2 hole mount and vintage (11/32" or 8.7mm) peghead hole. These normally use a press-in bushing rather than a screw in bushing..
- Introducing the NEW Kluson Revolution G-mount 19:1 high ratio tuning machine. Kluson has truly introduced a game changer with the traditional footprint and newly designed sealed die-cast housing. These state of the art tuners are designed to directly retrofit vintage tuners with a push-in bushing, traditional Kluson two-screw mounting pattern and vintage 11/32 inch peghole. The vintage outline, pearloid plastic keystone button and pin-stripes pay tribute to Kluson heritage while the brand new.
- SportHiTech are authorized Kluson dealers, and all products are factory-fresh and carry full manufacturer warranty, and are shipped in original retail packaging..
Check StockMartin SK 2 1/2 Quick Disconnect Bushing, Ductile Iron, Inch, 2.5\ Bore, 2.812\ OD, 1.93\ Length
- Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Split through flange and taper to provide strong clamping on the shaft.
- Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check StockCaliber Trucks Cal II 50° RKP Longboard Trucks Acid Melon
- NEXT LEVEL MANUFACTURING — Produced using Paris’ new, proprietary alloy-forming process, Paris V3 trucks utilize techniques derived from casting,....
- CARVING PERFECTION — The baseplate’s 50° angle and the hanger’s open bushing seat combine to offer a fluid transition between deep, diving....
- STRONG REINFORCED DESIGN — Broadened hanger shoulders and reinforced baseplate support beam reduce stress and increase overall strength..
- BUILT TO LAST — Down to a molecular level, the Paris V3 trucks are stronger than any other cast longboard truck on the market..
- ULTIMATE RESPONSE — For the best response and rebound, the Paris V3 trucks come with a redesigned top conical bushing and hand-poured urethane pivot....
Check StockMartin SDS 1 Quick Disconnect Bushing, Class 30 Gray Cast Iron, Inch, 1\ Bore, 2.187\ OD, 1.37\ Length
- Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Split through flange and taper to provide strong clamping on the shaft.
- Class 30 gray cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check StockMartin E 1 Quick Disconnect Bushing, Class 30 Gray Cast Iron, Inch, 1\ Bore, 3.834\ OD, 2.62\ Length
- Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Split through flange and taper to provide strong clamping on the shaft.
- Class 30 gray cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check StockMartin E 2 3/8 Quick Disconnect Bushing, Ductile Iron, Inch, 2.38\ Bore, 3.834\ OD, 2.62\ Length
- Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Split through flange and taper to provide strong clamping on the shaft.
- Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check StockMartin JA 1 1/4 Quick Disconnect Bushing, Ductile Iron, Inch, 1.25\ Bore, 1.375\ OD, 1.06\ Length
- Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Split through flange and taper to provide strong clamping on the shaft.
- Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check StockMartin SF 11/16 Quick Disconnect Bushing, Class 30 Gray Cast Iron, Inch, 0.68\ Bore, 3.125\ OD, 2.06\ Length
- Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Split through flange and taper to provide strong clamping on the shaft.
- Class 30 gray cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock