Top Centering Disc

Toledo Pipe 44165 Rear Centering Assembly D970 fits RIDGID 300 Pipe Threader

  • Toledo Pipe Tools is proud to give you alternative high quality replacement parts..
  • A replacement rear centering assembly fits RIDGID 300 and RIDGID 300 Compact.
  • Replaces Rear Centering Assembly on RIDGID 300 Power Drive 41855 75075.
  • Replaces Rear Centering Assembly on RIDGID 300 Compact 66947.
Check Stock

General Tools 806 Jiffy Centering Punch, Silver

  • The Jiffy Centering Punch makes centering screw holes for hinges, locks, brackets and other countersunk hardware.
  • The tool's tapered end fits inside the hinge or bracket screw hole for automatic centering.
  • For quickly starting screw holes when attaching countersunk hardware such as hinges, hasps, hangers and drawer pulls.
  • Countersunk end ensures starting hole is centered in hardware screw hole.
  • Hardened steel pin for repeated punching and makes easily identifiable marks in wood surfaces.
  • Length: 2-1/2" (68mm). Body diameter: 3/8" (10mm).
Check Stock

FJL FORCE Lathe Chuck Sets 4 Inch, Wood Lathe Chuck 5 Interchangeable 4-Jaw Wood Turning Lathe Nickel Plated Chuck, 1\x8Tpi Thread & 3/4\x16Tpi Adapter(Chuck Set)

  • ...PI conversion adapter, a set of 2in dovetail jaws,a set of step jaws, a set of flat jaws,a set of high jaws,a set of round jaws,to meet your creation basic clamping needs,no need to worry about going pairing and finding jaws,bringing much convenience to your operation..
  • 【LONG SERVICE LIFE】 - FJL FORCE 4inch self-centering keyed wood lathe body is made of high-grade K1045 steel,the sturdy wood lathe chuck can withstand high-intensity work without damage,extending the service life of the chuck.The jaws are hardened and hardened surface with black oxide electric coating,stain and wear resistant,not easy to rust,long service life..
  • 【ANTI-JITTER】 - Four-jaw mini lathe chuck has a high-precision self-centering design,the jaw fits perfectly with the chuck,tightening the clamping force beyond your imagination,the keyed fastening mechanism prevents the chuck from loosening during high speed operation,the claw and the disc body is linked with the I-shaped structure more firmly,the gap is small,the precision is high, there will be no jitter,falling problems..
  • 【QUICK INSTALLATION】 - Lathe tools clamping without repeated alignment,just clamp the workpiece according to your needs and use the tightening lever to tighten it,making your work easy,fast and co....
Check Stock

The Center Tool - Card Grading/Centering Tool

  • Determine the centering on your favorite cards: The Center Tool is the essential for any card collect who wishes to check the centering on their favorite sports cards and prepare them for grading.
  • Save tons in grading fees: check card centering before sending off a card to be graded to ensure you get the grade you are expecting.
  • Built with high-quality materials: created with high quality plastics and crystal clear printing, The Center Tool is built to last a lifetime.
  • Simply and easy to use design: optimized for sports cards and other cards that are 2.5" by 3.5" making it effortless and fun to use.
Check Stock

Jasper 200 PRO Circle Cutter Router Jig - Router Circle Cutting Jig Cuts Perfect Circles from 2 ¼ to 18 3/16 inche -Includes Calibration Disc, Pivot Pins and Fits Most Popular Routers

  • : The Jasper 200 Pro router jig guide allows you to cut 256 different-sized, precise, perfect circles from 2 1/4” to 18 3/16” D.
  • : The 200 Pro circle cutter router jig is made from high-quality, construction grade polycarbonate and, with registration, is guaranteed for life.
  • : The circle cutting router guide includes calibration disc for precise centering and pivot pins as well as router mounting hardware to ensure perfect circle cutting paths.
  • : Includes all hardware and mounts quickly to fit over 47 different models of plunge routers from popular brands like PORTER CABLE, BOSCH, DEWALT, MAKITA, RIGID, and many more.
  • : THE JASPER 200 is WOOD MAGAZINES Grade A, Top Tool Circle Routing-Jig. The router circle cutter jig guide is a must have for Speaker Makers, Woodworkers, and DIYers of every kind.
Check Stock

JIG IT Shelving Jig and 1/4 Bit Set

  • Drill Jig For Straight Holes: Get perfectly, consistently spaced, and centered shelf-pin holes with our shelf pin jig drill guide set! This shelf jigs....
  • Includes Two Storage Compartments: The re-designed drill jig handle includes two storage compartments for self-centering bits! Additional....
  • Using Multi-Position Drilling Template: Our cabinet handle jig determine the setback required for your project: 2-1/2'' (64mm) or 1-7/16'' (37mm).....
  • Self-Centering Drill Bits: Self centering drill bits are pre-set to bore a consistent depth for perfect fitting shelf pins and sleeves every time. No....
  • What’s Included In This Portable Drill Guide: This drill guide for straight holes kit includes (1) JIG IT Cabinet Door Handle Jig, (1)....
Check Stock

Jasper 240 PRO Circle Cutter Router Jig - Router Circle Cutting Jig Cuts Perfect Circles from 1” to 18 3/16” D - Circle Cutting Jig Includes Calibration Disc, Pivot Pins & Fits Most Popular Routers

  • : The Jasper 240 Pro circle cutter guide allows you to cut 276 different-sized, precise, perfect circles from 1” to 18 3/16” D.
  • : The 240 Pro circle cutter router jig is made from high-quality, construction grade polycarbonate and, with registration, is guaranteed for life..
  • : The circle cutting router guide includes calibration disc for precise centering and pivot pins as well as router mounting hardware to ensure perfect circle cutting paths..
  • : Includes all hardware and mounts quickly to fit over 47 different models of plunge routers from popular brands like PORTER CABLE, BOSCH, DEWALT, MAKITA, RIGID, and many more..
  • : The router circle cutting jig guide is perfect for speaker makers especially, woodworkers, and DIYers. This allows the users to get fast and perfect useful circles at every use.
Check Stock

Jasper 290 Circle Cutter Router Jig - Router Circle Cutting Jig Cuts Perfect Circles from 1 1/2” to 18 3/16” D - Circle Cutting Jig Fits Most Popular Trim Compact and Cordless Routers

  • : The Jasper 290 router jig guide allows you to cut 268 different size circles from 1 ½” to 18 3/16” D with Most Popular Trim Compact and Cordless Routers.
  • : The 290 circle cutter router jig is made from high-quality, hardened acrylic and guaranteed to last..
  • : The circle cutting router guide includes calibration disc for precise centering and pivot pins as well as router mounting hardware to ensure perfect circle cutting paths..
  • : Bosch Colt GFK125, PR10E, DeWalt DCW600, DWP611, Kobalt 1439333: Makita XTR01, Metabo M1808, Milwaukee M18FUEL2723-20, Porter Cable PCE6430, 450PK, Rigid R86044B, R24012, Ryobi P601.
  • : THE JASPER Circle Jigs are WOOD MAGAZINE’S Grade A, Top Tool Circle Routing-Jig. The router circle cutter jig guide is a must have for Speaker Makers, Woodworkers, and DIYers of every kind..
Check Stock

GORCHEN Center Drill Bit Self Auto Centering Hinge Drill Bit Set for Woodworking Door Window Cabinet Total 10 PCS

  • 【Material】 High speed steel drill bit, covered by a brass shell, more durable and excellent for usage.
  • 【Self Centering】 Automatic centering bring more accuracy and efficiency.
  • 2 holes design can discharge sawdust faster.
  • 【Various Sizes】 Total 8 bits: 5/64″, 7/64″, 9/64″, 9/64″, 11/64″, 5mm, 13/64″, 1/4″.
  • 【Attention】 Choose low speed when drilling (2000R/min – 3000R/min is good).
  • If too fast, bit may fail to centering, get broken or jammed.
  • 【Usage】 perfect for woodworking, door, window, cabinet, hinges, drawer slides, etc.
Check Stock

Fowler 52-646-400-0 Extender Dial Bore Gage Kit with 1.4-6 Measuring Range

  • ACCURATE MEASUREMENTS: This bore gage features a dial indicator with a graduations of 0.0005" and a measuring depth of 9.5".
  • EXTENDED RANGE: This 1.4-6" range bore gage, with a two-point contact system, is used for measuring hole diameters and also to detect geometry abnormalities such as ovality and taper.
  • carbide-tipped anvil contact points provide extended wear and improved abrasion resistance.
  • SELF CENTERING: The easily adjustable bore gauge is self-centering for fast, accurate measurements.
  • EASY AND EFFICIENT: This bore gage comes with an insulated grip and a chrome plated handle for easy use..
  • SET INCLUDES: Set comes with two self-centering measuring heads, an extension holder, spacers, and a fitted case.
Check Stock

74 pcs handheld dowel jig kit 2 in 1 Center Scriber Line doweling hole jig with Wood Dowels Pins Drill Bits for Woodworking Drilling and Marking

  • 2 in1 multi-function: Self Centering Dowel Jig for Drilling holes and Center Scriber Systerm for Marking (pin the pencil to a diameter of about 6mm) . Material : ABS engineering plastics and high hardness metal..
  • Useful Woodworking dowel jig kits : Package contain 1 pcs self centering dowel jig , 3 pcs drilling guides, 3pc wood drill bits,3 size *20 pcs wooden dowels, and 3pc dowel centering pins (Size :6mm(1/4”),8mm(5/16”)10mm(3/8”) , 1 pcs small wrench woodworking tool accessory kits ..
  • Adjustable to fit 16mm-106 mm wooden board : Self center doweling jig is movable with screws to fit different thickness of wooden board . It is widely used for precise positioning when punching holes on the side of wood boards, with good verticality and higher punching accuracy..
  • Precise Measurement -This woodworking centering tool can quickly and accurately mark center lines on wood board, scribe to draw 1/16 inch, 3/16 inch, 5/16 inch, 7/16 inch, 1/8 inch, 1/ 4 inch, 3/8 inch, 1/2 inch edge.".
  • Easy and Quickly: Positioning ensure accurate alignment when drilling, can quickly and accur....
Check Stock

ChgImposs Screw Thread Pitch Cutting Gauge Tool Set, Stainless Steel Centre Gage with 55 Degree Inch System & 60 Degree Metric System

  • Used to measure the pitch of the thread and the tooth-shaped corner.
  • It sets 4pcs centre gage 55 Degree Inch System & 60 Degree Metric System, 52 pcs.
  • Center Gage use to grind and position thread cutting tool on a lathe. Typically used to check the thread size determination is correct.
  • All 52 pcs was made by stainless steel, not easy to rust. Ensure the accuracy of measurement..
  • Package Include: 1 x 52 Blade thread gauge.
  • 1 x ISO Metric 60°centering gauge thread gauge Tool.
  • 1 x English Wyeth 55°centering gauge thread gauge Tool.
  • 1 x American Standard 60°centering gauge thread gauge Tool.
Check Stock