Top Centering Instrument

Toledo Pipe 44165 Rear Centering Assembly D970 fits RIDGID 300 Pipe Threader

  • Toledo Pipe Tools is proud to give you alternative high quality replacement parts..
  • A replacement rear centering assembly fits RIDGID 300 and RIDGID 300 Compact.
  • Replaces Rear Centering Assembly on RIDGID 300 Power Drive 41855 75075.
  • Replaces Rear Centering Assembly on RIDGID 300 Compact 66947.
Check Stock

General Tools 806 Jiffy Centering Punch, Silver

  • The Jiffy Centering Punch makes centering screw holes for hinges, locks, brackets and other countersunk hardware.
  • The tool's tapered end fits inside the hinge or bracket screw hole for automatic centering.
  • For quickly starting screw holes when attaching countersunk hardware such as hinges, hasps, hangers and drawer pulls.
  • Countersunk end ensures starting hole is centered in hardware screw hole.
  • Hardened steel pin for repeated punching and makes easily identifiable marks in wood surfaces.
  • Length: 2-1/2" (68mm). Body diameter: 3/8" (10mm).
Check Stock

The Center Tool - Card Grading/Centering Tool

  • Determine the centering on your favorite cards: The Center Tool is the essential for any card collect who wishes to check the centering on their favorite sports cards and prepare them for grading.
  • Save tons in grading fees: check card centering before sending off a card to be graded to ensure you get the grade you are expecting.
  • Built with high-quality materials: created with high quality plastics and crystal clear printing, The Center Tool is built to last a lifetime.
  • Simply and easy to use design: optimized for sports cards and other cards that are 2.5" by 3.5" making it effortless and fun to use.
Check Stock

JIG IT Shelving Jig and 1/4 Bit Set

  • Drill Jig For Straight Holes: Get perfectly, consistently spaced, and centered shelf-pin holes with our shelf pin jig drill guide set! This shelf jigs....
  • Includes Two Storage Compartments: The re-designed drill jig handle includes two storage compartments for self-centering bits! Additional....
  • Using Multi-Position Drilling Template: Our cabinet handle jig determine the setback required for your project: 2-1/2'' (64mm) or 1-7/16'' (37mm).....
  • Self-Centering Drill Bits: Self centering drill bits are pre-set to bore a consistent depth for perfect fitting shelf pins and sleeves every time. No....
  • What’s Included In This Portable Drill Guide: This drill guide for straight holes kit includes (1) JIG IT Cabinet Door Handle Jig, (1)....
Check Stock

GORCHEN Center Drill Bit Self Auto Centering Hinge Drill Bit Set for Woodworking Door Window Cabinet Total 10 PCS

  • 【Material】 High speed steel drill bit, covered by a brass shell, more durable and excellent for usage.
  • 【Self Centering】 Automatic centering bring more accuracy and efficiency.
  • 2 holes design can discharge sawdust faster.
  • 【Various Sizes】 Total 8 bits: 5/64″, 7/64″, 9/64″, 9/64″, 11/64″, 5mm, 13/64″, 1/4″.
  • 【Attention】 Choose low speed when drilling (2000R/min – 3000R/min is good).
  • If too fast, bit may fail to centering, get broken or jammed.
  • 【Usage】 perfect for woodworking, door, window, cabinet, hinges, drawer slides, etc.
Check Stock

Fowler 52-646-400-0 Extender Dial Bore Gage Kit with 1.4-6 Measuring Range

  • ACCURATE MEASUREMENTS: This bore gage features a dial indicator with a graduations of 0.0005" and a measuring depth of 9.5".
  • EXTENDED RANGE: This 1.4-6" range bore gage, with a two-point contact system, is used for measuring hole diameters and also to detect geometry abnormalities such as ovality and taper.
  • carbide-tipped anvil contact points provide extended wear and improved abrasion resistance.
  • SELF CENTERING: The easily adjustable bore gauge is self-centering for fast, accurate measurements.
  • EASY AND EFFICIENT: This bore gage comes with an insulated grip and a chrome plated handle for easy use..
  • SET INCLUDES: Set comes with two self-centering measuring heads, an extension holder, spacers, and a fitted case.
Check Stock

74 pcs handheld dowel jig kit 2 in 1 Center Scriber Line doweling hole jig with Wood Dowels Pins Drill Bits for Woodworking Drilling and Marking

  • 2 in1 multi-function: Self Centering Dowel Jig for Drilling holes and Center Scriber Systerm for Marking (pin the pencil to a diameter of about 6mm) . Material : ABS engineering plastics and high hardness metal..
  • Useful Woodworking dowel jig kits : Package contain 1 pcs self centering dowel jig , 3 pcs drilling guides, 3pc wood drill bits,3 size *20 pcs wooden dowels, and 3pc dowel centering pins (Size :6mm(1/4”),8mm(5/16”)10mm(3/8”) , 1 pcs small wrench woodworking tool accessory kits ..
  • Adjustable to fit 16mm-106 mm wooden board : Self center doweling jig is movable with screws to fit different thickness of wooden board . It is widely used for precise positioning when punching holes on the side of wood boards, with good verticality and higher punching accuracy..
  • Precise Measurement -This woodworking centering tool can quickly and accurately mark center lines on wood board, scribe to draw 1/16 inch, 3/16 inch, 5/16 inch, 7/16 inch, 1/8 inch, 1/ 4 inch, 3/8 inch, 1/2 inch edge.".
  • Easy and Quickly: Positioning ensure accurate alignment when drilling, can quickly and accur....
Check Stock

ChgImposs Screw Thread Pitch Cutting Gauge Tool Set, Stainless Steel Centre Gage with 55 Degree Inch System & 60 Degree Metric System

  • Used to measure the pitch of the thread and the tooth-shaped corner.
  • It sets 4pcs centre gage 55 Degree Inch System & 60 Degree Metric System, 52 pcs.
  • Center Gage use to grind and position thread cutting tool on a lathe. Typically used to check the thread size determination is correct.
  • All 52 pcs was made by stainless steel, not easy to rust. Ensure the accuracy of measurement..
  • Package Include: 1 x 52 Blade thread gauge.
  • 1 x ISO Metric 60°centering gauge thread gauge Tool.
  • 1 x English Wyeth 55°centering gauge thread gauge Tool.
  • 1 x American Standard 60°centering gauge thread gauge Tool.
Check Stock

CXOYLL Z011A 4-Jaw Chuck for Mini Lathe, Self Centering Mini Lathe Chuck with L-Shaped Wrench, Zinc Alloy Chuck Clamp Accessory Inner Clamping Diameter 1.8-56mm (Silver)

  • 【Z011A 4-Jaw Chuck, FourJaw Mini Lathe Chuck】- 1. 4-jaw design, compact size, easy to use. The Mini lathe tools 4 Jaw Chuck has a large clamping range. Outer diameter about 12 mm-65 mm, Inner diameter: about 1.8mm-56mm..
  • 【Woodworking Accessories Self-centering 4 Jaw Lathe Chuck】- The self-centering lathe part contains a delicate oblique angle gear and pinion gears. They contribute to precise processing progress. Widely used for woodworking lathe..
  • 【Scope Applications of the Zinc Alloy Mini Lathe Chuck】- The 4 Jaw design Lathe Chuck is made of high quality zinc alloy material, wear-resistant, strong and durable. Mainly used for mini metal lathe. Since the changeover and setting time is cut, your lathe can work with higher efficiency..
  • 【Practical Lathe Accessories Self Centering Mini Chuck】- The lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • 【Package included】- 1 x Lathe Chuck, 1 x L-shaped Wrench.
  • The 4 Jaw lathe chuck is widely applied to Mini metal lathes for the general turning of shafts and some more delicate materials. It would be the perfect choice for your lathe machin....
Check Stock

Big Horn 19651 Shelf Pin Drilling Jig

  • Achieve consistently spaced and centered shelf-pin holes.
  • Clear template features laser-cut accuracy.
  • Handle mounts to either side of the template for two different setback options.
  • Works with four different bit sizes for shelf pins or pin sleeves.
  • Self-centering bits bore to a consistent depth every time| One 1/4-Inch self-centering bit included..
Check Stock

CRAFTSMAN Hole Saw Kit for Metal Doors CMAH1MDL

  • ADJUSTABLE: For both 2-3/8-inch and 2-3/4-inch backsets.
  • SELF CENTERING: Self centering jig fits all common door widths.
  • Common applications include wood doors and metal doors.
  • Item Package Dimension: 6.46" L x 2.83" W x 8.7" H.
Check Stock

20pcs Metal Candle Wick Holders, Upgraded Candle Wick Centering Devices, Silver Stainless Steel Candle Wick Holder for Candle Making

  • ✿✿Upgraded Version: Including 20 pcs new candle wick centering device. The new one is longer and is suitable for the candle cup with a larger diameter. The cross hole is adopted to make it more convenient to use, also it is thicker and stronger..
  • ✿✿Perfect Size: Length 10.4cm/ 4.1 inch, width 2.5cm/ 0.98 inch, The wick centering device is suitable for most candle containers..
  • ✿✿Excellent Material: Candle wick holder made of high-quality stainless steel, strong, durable, high quality. Designed for long term use..
  • ✿✿Easy To Operate: Candle wick Clips allow you to keep wick centered. This wick holder will make your candle making process easier..
  • ✿✿Quality Guarantee: With humanize return policy. Value for money guaranteed, if you are not Satisfied with our 3 holes wick centering devices for Any Reason, you can contact us for a free replacement or 100% MONEY BACK GUARANTEE..
Check Stock