Top Ceramic Nozzles For Tig

Skat Blast Medium Ceramic Nozzle Combo Pack for Skat Blast Power Siphon Sandblasting Guns, Made in USA, 6300-60

  • Skat Blast siphon power guns have an air jet, which fits inside the end of the power head assembly directly behind the nozzle. Both the nozzle and air jet must be changed on a regular basis to keep your cabinet in good working order. Because the size of the air jet must match the size of the nozzle, we make this convenient combo pack..
  • Combo pack includes: 5 ceramic nozzles, 2 air jets, 2 air jet gaskets, and 1 nozzle gasket.
  • Ceramic nozzles last up to 3 times longer than steel, about 6-8 hours per nozzle..
  • To save wear on the power gun and air compressor, and for best overall results, replace nozzles promptly (Replace air jet and gasket with every 2-3 nozzles.).
  • Nozzles: 1-5/8" long, 1/2" diameter, 1/4" I.D. Requires 10-15 cfm. Operating pressure 60-100 psi..
Check Stock

TUFF-Blast Neoprene Gloves for Sandblasting Sandblaster Sand Blast Cabinet - 6\ x 24\ Made in USA

  • Sandblaster Nozzle Assembly: Includes two high quality ceramic tips, nozzle seat and a brass NPT ball valve with a 1/2" connector for long life..
  • Alumina Ceramic Nozzles: Our secret to longer blasting times is to use the included Alumina Nozzles, which are approximately 2-1/2" (63mm) in length to provide more material wear. Our premium tips are higher density and last longer..
  • Long Lasting High Performance : Durable ceramic sand blaster nozzles that can be used to blast high speed media particles, which quickly remove paint, rust, corrosion and scales..
  • Sandblasting to remove rust and surface treatment. Good use performance, strong wear resistance, long life and high efficiency. Mainly used for the surface deoxidation treatment of machinery, industrial machinery parts, metallurgical castings, etc..
Check Stock

TIG Stubby Gas Lens 17GL332 10N24S (3/32' & 2.4mm) Glass Cup #10 (5/8' & 16mm) Ceramic Cup 53N60 53N61 53N61S Medium Back Cup 57Y03 Assorted Kit Fit DB SR WP 17 18 26 TIG Welding Torch 12pcs

  • This kit fits all 17 & 26 series air cooled torches and 18 series water cooled torches, including the Lincoln PTA-17, PTA-18 and PTA-26 torches, Miller Diamondback DB17,DB18 and DB 26 torches, along with the Weld craft WP-17, WP-18 and WP-26 torches..
  • Each size for Insulated Glass Cup #10 ( 5/8" x 1" & 16.0mm x 25mm ) , Medium Back Cup 57Y03 , TIG Collet 10N24S ( 3/32" & 2.4mm ) , TIG Stubby Gas Lens 17GL332 ( 3/32" & 2.4mm ) , TIG Gas Lens Alumina Nozzle ceramic cup 53N60 #6 , 53N61 #7 , 53N61S #8 and TIG Gas len insulator 17GLG20.
Check Stock

VASTOOLS TIG Holder for Welding Torch/Magnetic Torch Holder/Weld Torch Metal Stand with Strong Magnetic Base/For Mig or Plasma torch

  • The TIG Torch Magnetic Stand Holder is made of Iron with Magnetic Base..
  • Prevent damage to tungsten tip and ceramic nozzle..
  • It also work upside down.the magnet was fixed firmly in the base..
  • With strong magnetic holding force, keep your torch stably fixed,safer and easier access..
  • Universal Design Fit For Full TIG, MIG, MAG, and Plasma torch in a variety of ways and angles..
Check Stock

Eastwood 4 Pieces 1/4 in. Medium Replacement Steel Siphon Silver Nozzles Set for Siphon Power Sandblasting Guns

  • He Steel Nozzles Don'T Last As Long As The Ceramic Nozzles But They Are Less Likely To Break If The Gun Is Dropped.
  • This Nozzle Set Includes Nozzles , One Air Jet And An Air Jet Washer.
  • These Nozzles Fit Our Blast Cabinets And Our Blast-Out-Of-A-Bucket Gun.
Check Stock

TIG Welder, Diversion 180, 120-240VAC

  • Price For: Each Series: Diversion 180 Aluminum – Material Thickness: 0.025″ to 3/16″ Mild Steel – Material Thickness: 0.030″ to 3/16″ Includes: 12.5ft. Torch with Backcap, Ceramic Gas Cup, 3/32in Collet and Collet Body, 2% Ceriated Tungsten, RFCS-RJ45 Remote Foot Control, 12ft. Work Lead With Clamp, Regulator/Flow Gauge with Hose Overall Width: 9.875″ Overall Height: 17″ Welder Duty Cycle: 35%.
  • Power Source Weight: 50 lb. Welder Min. Output Amps: 10 Features: Inverter-Based, AC/DC Power Source, Fan-On-Demand, Portable Uses Miller’s MVP(TM) Plug for Multi-Voltage Usage, Digital Display, Remote Amperage Foot Control Included Input Voltage: 120/240VAC Polarity: AC/DC Welded Material: Aluminum, Steel Welding Processes: TIG.
  • Application: Aerospace, Construction, Heavy Equipment Manufacturing, Infrastructure, Manufacturing, Railcar, Shipbuilding, Boat / Yacht, High Purity Processing Input (Amps): 11.3/16 Rated Output: 60A @ 12.4V/150A @ 16V Welder Input Phase: 1 Welder Input Hz: 50/60 Item: TIG Welder Overall Depth: 23.875″ Welder Industrial Class: Light Welder Max. Output Amps: 180 Country of Origin (subject to change): United States.
Check Stock

Tig Life Tig Welding Shirts for Men Tig Welder Gift

  • Tig life is a welding shirt for tig welders who enjoy stacking dimes and laying the perfect bead. Makes a great welder gift, birthday gift or Christmas gift for professional welders, welding enthusiasts, amateur welders, or anyone who loves tig welding..
  • Tig life is a great welding shirt for tig welders. Show your love of tig welding with this tig welding shirt for welders of any age. Makes a great Christmas gift for tig welders. Amp up your welding apparel with this tig life welding shirt for men or women.
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

Composite Carbide Sandblaster Nozzle Tip: 3/32' ID, Longer-Lasting than Tungsten & Boron Blasting Nozzles

  • SUPER COMPOSITE CARBIDE: Experience one of the longest lasting materials used in a sandblaster nozzle at a fraction of the price. The composite carbide lasts much longer than Ceramic, Tungsten Carbide & even Boron Carbide..
  • LONG-LASTING NOZZLES SAVE $: Composite carbide sandblaster nozzles are known to outlast all other types. These are estimated to last up to 1000x ceramic, 50x times tungsten carbide, 5x times boron carbide..
  • 3/32" ID BORE DIAMETER: Our medium size is most common, especially for blasting both fine & course abrasive grits inside a cabinet. Shape: standard tapered nozzle tip which is great for for most pressure pot sandblaster nozzle holders..
  • PREMIUM SANDBLASTER NOZZLE: Made of a hard, compacted, specially formulated carbides weighting about 30 grams! Holds up to aggressive abrasive like aluminum oxide and silicon carbide. Has an estimated service life of up to 1,000+ hours with aluminum oxide abrasive!.
  • WEAR RESISTANCE CARBIDE: Get better performance with low-wear nozzles and save money in the long run! 100% SATISFACTION GUARANTEE or your money back. Please contact us if you feel it didn't last..
Check Stock

Parlux 385 Power Light Ionic and Ceramic - Pink

  • LIGHT WEIGHT & SILENT: Reducing the weight of all the components an exceptionally light hairdryer was created and at the same time it result more silent..
  • IONIC & CERAMIC: It has the IONIC & CERAMIC technological device, which is essential for healthy, static-free hair..
  • ECO FRIENDLY: Use of highly recyclable materials - built-in silencer which greatly reduces of the "noise" – very fast drying to energy saving..
  • SILENT & ENERGY-SAVING: Parlux 385 Powerlight brings to light the already know and appreciated characteristics of Parlux: less-noise (with built-in silencer) and well-balanced for a more comfort. Moreover the excellent Parlux 385 Powerlight very fast drying increasing energy savings and safeguarding the environment..
  • EQUIPPED WITH 2 NOZZLES PARLUX 385 POWERLIGHT: Equipped with two nozzles enabling a quick, precise and secure adhesion. One for a perfect setting of the hair and the other for fast drying..
Check Stock

hynade Tig Welder TIG215A, HF ARC/TIG/Stick TIG Welders 215 Amp 110/220V Dual Voltage TIG Welding Machine

  • Multi-function tig welding machine : machine with HF(High Frequency Arc Starting) TIG, Lift TIG, Stick/Arc function, the user easy select the function depend on environment if needed. HF TIG need to connect argon gas into machine, for lift Tig the torch need a gas hose connect to gas bottle.Under Stick function, machine with Hot arc starting and Anti-Stick.
  • Dual voltage tig welder 110/220V : Machine designed basic on dual voltage 110V/220V, Under 220V , TIG mode is 215Amps , MMA is 200A .Under 110V,185Amps for TIG, 165Amps for Stick .The machine with 110V power plug, a conversion wire in the package (220V male 110V Female).
  • Post time adjustment welders: The post time for the gas can be adjust from 2 to 8 Seconds, It is IGBT Inverter Technology, 50/60Hz 110/220V base, with LED current display show the real current. This machine with full new designed, adopt advance technology and high quality electronic parts, These can help machine makes perfect work.
  • Compact design: The design makes the welding machine light and easy to carry. Great for studio or home use . You can use it to weld doors and windows, fences, repair cars and more. Definitely a good helper for your life and work.
  • Accessories:All parts come with the TIG Stick welder machine are show in ....
Check Stock

MOFLAME Ceramic Infrared DIY Heating Gas Burner with Gas Intake Nozzle Parts for Outdoor Indoor Heater BBQ Stove.Oxyhydrogen Burner

  • 웃➛Replacement stainless steel side ceramic plate gas burner for your infrared grill, heater.Oxyhydrogen Burner oven.
  • 웃➛ Easy Install- The burner with M8 Nozzles can be easily set in a gas grill or heater.
  • 웃➛The size of the main gas burner is 8.66""x 6.69（220x170mm), Nozzles Size: M8.
  • 웃➛ The ceramic plate can avoid high flame and keep warm. BTU Rating: 120000.
  • 웃➛Replace the stainless steel burner in the grill or heater.
  • it's a perfect flame for searing meats and veggies or toasting bread.
Check Stock

Eastwood 3.0 Mm Id Ceramic Rubber Blast Nozzles Tips Abrasive Sand Blaster Blasting for Sand Blasting Gun Cabinet Pack of 3

  • These Ceramic/Rubber Nozzles Are Designed To Be Extremely Efficient With Cfm Usage And Extended Life.
Check Stock