Top Certified Safety Jack Stands

ABN 5-½in Large Jack Pad Universal Fit Cross Slotted Frame Rail Protector

  • ...loor jack pad that prevents the jack from exposing structural metal and is designed to protect the pinch welds, your vehicle under chassis, and overall frame so you can safely lift your vehicle at the proper jack points without scratching paint or causing metal-on-metal damage while using a hydraulic jack.
  • BUILT FOR SAFETY: This floor jack rubber pad is constructed from stiff rubber that cushions your car from damage and increases safety when secured properly.
  • Bottom side of slotted rubber jack pad includes textured grooves to ensure correct and safe fitment on jack without slippage.
  • USE YOUR JACK: Top side of car jack pad has slotted crosshairs to align with and protect side pinch welds while the bottom of the jack lift pad is also keyed with 4 recesses that fit onto 4-inch cup rim lugs on your jack to prevent the pad from spinning on the floor jack cup (cup and pad contact starts between these lugs).
  • LARGE SIZE: Fits beveled 5.5-inch steel lift cups bowl saddles on standard hydraulic floor jacks.
  • Floor jack saddle pad has 5.5-inch (14cm) top diameter and 4-inch (10.2cm) bottom diameter, 1.75-inch height (4.4cm), 4 slots have approx. 0.4-inch width and 0.75-inch depth (1cm x 1.9cm).
  • To ensure fitment, measure ID of your jack and compare to 5.5-inch dia....
Check Stock

Blackhawk B6350 Black/Red Fast Lift Service Jack - 3.5 Ton Capacity, 28 1/2\ L x 13 3/4\ W x 6 1/2\ H

  • Built-in internal safety valve and vent plug ensures safe operation.
  • Swivel saddle provides easy jack positioning and user safety.Saddle Diameter: 4 inch.
  • Jack Size: 28 1/2" L x 13 3/4" W x 6 1/2" H.
  • Rugged universal joint for precise load control.
  • Great for working in the garage and other outdoor activities such as picnics or ball games.
  • Note: The hydraulic jack is designed to lift, not to support the object. Immediately after lifting, loads must be supported by a pair of appropriately rated jack stands.
Check Stock

Mountain 33502 3.5 Ton Automotive Service Floor Jack for Garages, Repair Shops, and DIY, 7,000 lbs. Capacity, Hydraulic Lifting Range 3.75\ - 21.75\

  • SPECIFICATIONS: Min Height: 3.75" | Max Height: 21.7" | Capacity 7,000 Lbs.
  • DURABILITY: Heavy duty steel construction provides stability and years of service..
  • SAFETY: Integrated overload and by-pass safety valve prevent use beyond rated capacity and over-extension. Padded handle provides vehicle protection when jack is lifting..
  • EASY TO USE: Rear swivel casters and saddle for quick and easy positioning of jack under vehicle. Jack stands feature a wide base design for stability and strength.
  • CONVENIENT: Handle located on top of jack for quick and easy transportation..
Check Stock

22 Ton (44,000 lbs) Jack Stands (1 Pair), Heavy Duty Pin Type Professional Car Jack Stand with Lock,Wide Base Safety Design for Supporting Trucks, Trailers and Equipment,Blue

  • Heavy-duty Jack Stand:22 Ton (44,000lbs) capacity fits most vehicles.Minimum Height: 11.82" ,Maximum Height: 19.75".
  • Robust and durable: The welded steel structure with strong structure can prevent deformation or distortion, and has excellent safety and strength. Each jack stand is equipped with a large chassis design, which greatly improves the stability during use..
  • Easy to use: The handle is designed on the side for easy positioning and carrying. The locking pin is fixed on the base to prevent loss..
  • Application: Jack stands are helpful to support the vehicle after lifting with jack, widely used in cars, trucks, SUVs, ATVs, UTVs.
  • Package includes: a pair of heavy duty jack stands.If you have any questions while using it, please feel free to contact us and send an email to us. We will provide you with satisfactory service..
Check Stock

BIG RED T82040 Torin Hydraulic Trolley Floor Service/Floor Combo with 2 Jack Stands and Rolling Garage/Shop Creeper, 2 Ton (4,000 lb) Capacity, Red

  • Two heavy duty 2-ton jack stands with quick adjustment mechanism and double locking pawl.
  • 2 ton trolley jack with safety overload feature has 360 degree swivel casters and rotating heavy duty saddle.
  • Trolley jack lifting range is 5.6 to 13 inches.
  • 2 piece creeper with an all steel construction frame features 6 wheel durable rotating casters, and includes padded bench.
  • Factory tested for reliability and safety.
Check Stock

Omega Lift 32068 Heavy Duty Jack Stands 6 Ton Pair - Double Locking Pins - Handle Lock and Mobility Pin for Auto Repair Shop with Extra Safety Black

  • strength and stable - omega lift 32068 is 6 ton jack stands that are designed to support your vehicle after lifting with a floor jack. it features....
  • sturdy stamped steel - it is constructed with the sturdy stamped steel with a welded frame design for durability. with the lifting range from 16....
  • double locking pins - it features double locking pins mechanism. with both handle lock and mobility pin, and a large saddle surface area is designed....
  • quick height adjustments - the ratchet bar is built with hight quality cast ductile iron with the mulitple position. its sawtooth design allows for....
  • ansi/pald standards - omega lift heavy duty jack stands are tested for reliability and safety to meets or exceeds ansi/pald standards. ideal for home,....
Check Stock

Omega Lift Heavy Duty 6 Ton Jack Stands Pair - Double Locking Pins - Handle Lock and Mobility Pin for Auto Repair Shop with Extra Safety (JZ060)

  • It Is Constructed With The Sturdy Stamped Steel With A Welded Frame Design For Durability. With The Lifting Range From 16 Inches To 23-1/2 Inches, It Gives You The Abilityto Handle A Wide Range Of Vehicles Including Small Cars, Suvs, And Light Duty Trucks.
  • Omega Lift Heavy Duty Jack Stands Are Tested For Reliability And Safety To Meets Or Exceeds Ansi/Pald Standards. Ideal For Home, Auto, Truck Service, Farm, And Shop Use.
  • Omega Lift Jz060 Is 6 Ton Jack Stands That Are Designed To Support Your Vehicle After Lifting With A Floor Jack. It Features Wide Pyramid Foot Base To Provide The Added Strength And Stable Support.
  • The Ratchet Bar Is Built With Hight Quality Cast Ductile Iron With The Mulitple Position. Its Sawtooth Design Allows For Quick Height Adjustments That Lock Into Place. Height Adjustment Mechanism Allows Smooth Upward Movement While Releasing Handle Locks And Mobility Pin.
Check Stock

AFF Viking 4 Ton Ratcheting Style Jack Stand Set, 55040

  • FEATURES – Locking pawl with built-in counter weight to secure ratchet bar at designated heights.
  • keeping you safe in the most dangerous conditions.
  • STRENGTH – Ratchet bar is constructed with ductile iron for increased strength and safety.
  • these jack stands are built for the most demanding conditions, fit for any job.
  • DURABLE – Welded design for maximum strength and durability.
  • USE – Sold and intended for use in pairs.
  • STABILITY – Jack stand features wide base for added stability.
Check Stock

Sinestro Vol. 3: Rising

  • Item arrives in frustration-free, easy-to-open packaging that's 100% recyclable. For a gift-ready box, select "Ship in Amazon packaging" at checkout..
  • Recreate the magic of Disney and Pixar The Incredibles with this pair of super-sibling character figures -Violet and Fire Jack-Jack..
  • Designed with true-to-movie detail, Violet figure stands 5.75 inches (14.6 cm) tall, wears her red super-suit and features multiple joints for dynamic posing!.
  • Jack-Jack figure stands 2.6 inches (6.7 cm) tall, is in a fiery mood and can also be posed -recreate scenes from the movie or imagine new ones!.
  • Designed with true-to-movie detail, Violet and Jack-Jack are ready to take on the bad guys, Violet in her super suit and Jack-Jack…well he's on fire!.
Check Stock

Jack Daniel's Licensed Barware Shot Glass

  • Clear glass shot with white fired Jack Daniel's Gentleman Jack logo.
  • Great addition to any barware collection!.
  • Great addition to any barware collection.
Check Stock

CARTMAN Car Jack Stands, 2 Ton (4,400 lb) Capacity Steel Car Lifting Stand, Self-Locking Ratcheting Jack Design for Quick Adjustment, Automotive Jack Stand Sets for UTV ATV Van Sedan, 1 Pair

  • Constructed with the sturdy stamped steel with a welded frame design for durability..
  • Pair of 2 ton jack stands with 4000 lbs capacity total (when used together) help support vehicles after lifting with a jack..
  • Multi-position forged iron ratchet bar has a sawtooth design, allowing for quick height adjustments from 10.6" to 16.5"..
  • Wide pyramid foot base and large top saddle provide enough stable support to keep safety. Use on a level surface! Always use a jack stand on flat, stable ground..
  • Meets US safety standards and includes a limited 2-year manufacturer warranty..
Check Stock

Torin 3 Ton (6,000 LBs) Capacity Double Locking Steel Jack Stands, 2 Pack, Black, AT43002AB

  • Double locking jack stands help support vehicles after lifting with a jack.
  • Handles a wide range of vehicles including small cars, ATV's, UTV's, and more.
  • Features a lifting range of 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity.
  • Saddle has a large surface area that provides better contact with the load being supported.
  • Constructed with heavy-duty steel and is industrial welded for quality and long term durability.
  • Removable locking support pin provides added security that increases safety by 200%.
  • Wide pyramid style foot base provides added strength.
  • Large foot base delivers additional stability and measures 7-11/16" x 6-7/8".
  • Multi-position forged iron ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place.
  • Meets ASME safety standards and includes a limited 1 year manufacturer warranty.
Check Stock