Top Cfm Flow Meter
CGOLDENWALL Turbine Flow Meter Fuel Meter Digital Flowmeter with FNPT Thread, Flow Meter for Water Diesel Kerosene Gasoline, Flow Rate Range 2.5-26GPM (1 inch Flow Meter)
- FLOW METER: Before use, please calibrate the flow meter with the liquid to be tested. And the flow rate of the liquid should exceed 2.5 gallons per minute, if the flow rate is too slow, the flow meter cannot measure normally. There is no battery included..
- MULTI-FUNCTION DISPLAY: High-definition LCD display, can read single cumulative flow, instantaneous flow and total cumulative flow. The clear function can clear the value of cumulative flow, to make sure it is always within the measuring range. If your flow meter cannot work, please contact us in time..
- HIGH-QUALITY MATERIALS: The aluminum alloy housing is sturdy, durable and corrosion-resistant, which have a long service time. The PCB circuit board make the battery have a long service life, and safe in use. Please NOTE: the LCD display is not water proof.
- INSTALLATION: The flowmeter can be installed in horizontal and vertical directions, but the flow direction of the liquid needs to be consistent with the direction of the arrow on the flowmeter. There is no direction requirements for the installation of the display screen..
- MEASURABLE LIQUIDS: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids..
Check StockCGOLDENWALL Turbine Flow Meter Digital Fuel Flowmeter with FNPT Inlet/Outlet, 1inch Flow Meter for Water Diesel Kerosene Gasoline, 2.5-26GPM /9-100LPM (1 inch)
- FLOW METER: the 1 inch flow meter can read instantaneous flow rate, single cumulative flow and total cumulative flows. But it has minimum flow rate requirment, if the flow rate of the tested liquid is lower than 2.5 gal/min, the readings will be inaccurate..
- TECHNICAL PARAMETERS:① diameter of water inlet: 32mm.
- ③ the flow speed requirenment for tested liquid: 2.5~26 gal/min.
- ⑥ max temp of tested liquid: 158°F/70°C.
- MULTIPLE UNITS: the flow meter provide 4 meauring units for option, which are liter, gallon, pint and quart. The unit defaults to gallons, if the unit is not gallons, please refer to the user manual to change the unit to the needed one..
- NOT WATER PROOF: the flow meter is not water proof, please keep the display from water during use, to avoid chip damage. We upgraded The flowmeter has been upgraded from never-sleep model to auto-sleep model, which automatically dims the screen when no liquid is flowing through it..
- WIDE APPLICATION: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids. If there is any problem, please contact us in time..
Check StockMilton 5 In ONE Universal Quick-Connect Coupler 1/4 FNPT - Box of 100
- Accepts all major interchanges: Industrial (M-Style), High Flow (V-Style), Automotive (T-style), ARO (A-Style) & Lincoln (L-style).
- 6 ball bearing construction for longer life.
- Quick connect coupling for a safe & easy air hose connection.
- Max PSI: 120 PSI | Air Flow: 80 PSI @ 31 or 44 CFM, 90 PSI @ 34, 35, 50 CFM, 100 PSI @36, 37, 50 CFM, 120 PSI @ 44, 45, 67 CFM.
Check StockHiCFM 13000 CFM 30 inch Heavy Duty High Velocity Barrel Floor Drum Fan With Powerful 1/3HP Motor, 9ft Power Cord for Workshop, Garage, Commercial or Industrial rooms - UL Safety Listed
- ...arehouse, Workshop, Factory, Garage, Basement, Industrial, Commercial and Covered Patio.
- 【Low Noise & Long Airflow】: HICFM’s new technology contributes longer air movement with lower noise. During high speed running, air speed even reach 8.1 m/s. Noise 67 dB on 1 meter, 63 dB on 2 meter and 60 dB on 3 meter away from the fan, which less noisy than other fan.
- 【Ease to Move】: This industrial floor fan composed with 5 inch solid wheels and 2 carry handles for convenient transportation, easy moving everywhere portability. With nonskid positioning legs on the other side, making the fan more stable during long time operation.
- 【Simple Assemble & Use】: New frustration free packaging and easy assembly. Only one simple step to complete the drum fan quickly with 5 inch solid wheels for beating your summer heat from the box. 3 speed selection meet your different airflow demand.
- 【Durable and Sturdy】: UL Safety Listed, 100% copper wiring stator, thermally protected motor with sturdy metal housing. Safety yellow powder coated steel construction, extra-long 9 foot SJ....
Check StockFlow Meter,Aluminum Alloy 1/2 inch Digital LCD Display High Accuracy Fuel Diesel Flowmeter Water Flow Rate Sensor,Control and Measure Low Flow for Gasoline,Kerosene,Engine Oil Blue
- ✔【DIGITAL LCD DISPLAY】The aluminum alloy flow meter has LCD screen display, which can provide clear reading. Meanwhile, the LCD display flow....
- ✔【READING AND ACCURACY】There aluminum alloy fuel diesel flow meter has intuitive clear reading and high reliability on digital stainless steel....
- ✔【WIDE COMPATIBILITY】The high accuracy fuel flow meter is suitable for high viscosity liquid media such as diesel, gasoline, kerosene, engine....
- ✔【RELIABLE QUALITY】The blue LCD display high accuracy aluminum alloy fuel diesel flow meter is 100% brand new and high quality. Meanwhile, it is....
- ✔【100% WARRANTY】We promises every customer a 100% shopping satisfaction, feel free to reach us if you have any questions about your purchase.We....
Check StockZLINE 667-36 Range Hood, 36 in, Stainless Steel
- Powerful air flow requires ducted, external venting.
- Easy-to-use push button controls let's you easily control fan speed and lighting.
- 4-Speed Fan Control (280/460/670/1200 CFM) let's you choose the appropriate air flow for your cooking situation.
- 1200 CFM Air Flow (highest speed setting) efficiently moves large amounts of air away from your cooking area while maintaining a relatively quiet kitchen environment (56 decibels).
- Ductwork easily connects to the top of the range hood.
Check StockHiCFM 8300 CFM 30 inch Heavy Duty High Velocity Pedestal Oscillating Fan with Powerful 1/3 HP Motor, 9 FT Cord & Turbo Yellow Blade for Warehouse, Garage or Industrial Commercial Use - UL Listed
- ...arehouse, Workshop, Factory, Garage, Basement, Industrial, Commercial and Covered Patio.
- 【Low Noise & Long Airflow】: HICFM’s new technology contributes longer air movement with lower noise. During high speed running, air speed even reach 8.9 m/s. Noise 67 dB on 1 meter, 63 dB on 2 meter and 60 dB on 3 meter away from the fan, which less noisy than other fan.
- 【Oscillation and Height】: Equipped with a versatile 80-degree oscillation function let you customize the airflow more flexible and move large air volume. The fan’s height adjustable from 65 inch to 77 inch, with tilting 15 degree to enlarge the air delivery range.
- 【Easy Assemble & Use】: New frustration free packaging and easy assembly. Only several simple steps to complete the stand fan quickly for beating your summer heat from the box. Spring inside standing pole for lifting up the fan head easily.
- 【Durable and Sturdy】: UL Safety Listed, 100% copper wiring stator, thermally protected motor with sturdy metal housing. Black powder coated steel construction, safety yellow turbo aluminum blades with ext....
Check StockForney 85364 MIG Gas Flow Meter and Regulator, MIG/TIG Welders
- Combination of regulator and flow meter as one single stage piston design unit.
- Provides accurate regulation of gas flow.
- Impact resistant machined brass body, polycarbonate flow tube and outer cover.
- Features regulator and flow meter in one unit.
- Provides accurate regulation of gas flow designed for MIG and TIG applications.
Check Stock0386-0849 Nitrogen Flow Meter 1/4 Inch SAE Flare Inlet and Outlet Connection 50PSI 0-75CFH Nitrogen Flow Indicator for Brazing
- Easy to Use: this nitrogen flow meter has 1/4" female torch inlet connector and 1/4" male torch outlet connection, can be used with nitrogen-purging....
- Nitrogen Flow Indicator: There is a float inside the flow meter, it can help you confirm whether nitrogen is flowing during brazing, providing low....
- Precise Control: The th folw indicator can control the gas flow through the copper tube during the brazing process, the flow accuracy can reach 3-4....
- Enhance Safety: This product provides extremely low flow through high precision gas control and has an overpressure safety relief rupture disc, so it....
- Excellent Material: The valve body structure of The meter is made of brass, which is resistant to corrosion and rust, and is durable.
Check StockRAINPOINT Water Meter Water Flow Meter for Garden RV Hose Measure Gallon or Liter Water Consumption Fits 3/4-inch Outdoor Hoses and Faucets
- HELPS CONSERVE WATER >>This portable water meter measures water consumption and water flow rate. With large LCD display allows you quickly know about....
- SENSITIVE & ACCURATE >> This water flow meter is equipped with a built-in hall sensor, Accuracy up to 1/10th Gallon, Measurement Tolerance > RAINPOINT hose water meter monitors not only the current singular watering volume and accumulative total water consumption, but....
- SIMPLE & FAST CONNECTION >> The hose flow meter comes with 2 quick connectors and can be easily connected to any standard 3/4’’ garden hose,....
- EASY TO USE >> The LCD screen of this water hose meter is big enough to be easy to read and displays water usage in gallons or liters. One button....
Check StockZLINE 48\ Professional Ducted Wall Mount Range Hood in Stainless Steel (667-48)
- Powerful air flow requires ducted, external venting.
- Easy-to-use push button controls let's you easily control fan speed and lighting.
- 4-Speed Fan Control (280/460/670/1200 CFM) let's you choose the appropriate air flow for your cooking situation.
- 1200 CFM Air Flow (highest speed setting) efficiently moves large amounts of air away from your cooking area.
- Ductwork easily connects to the top of the range hood.
Check StockZLINE 30\ Ducted Under Cabinet Range Hood in Stainless Steel (623-30)
- Powerful air flow requires ducted, external venting.
- Easy-to-use push button controls let's you easily control fan speed and lighting.
- 4-Speed Fan Control (270/380/490/600 CFM) let's you choose the appropriate air flow for your cooking situation.
- 600 CFM Air Flow (highest speed setting) efficiently moves large amounts of air away from your cooking area while maintaining a relatively quiet kitchen environment (~55 decibals).
- 7" Ductwork easily connects to the top of the range hood.
Check Stock