Top Chamfer Milling Cutters

KEO 94168 High-Speed Steel Woodruff Keyseat Cutter, Uncoated (Bright) Finish, Round Shank, 1/2\ Shank Diameter, 1-1/2\ Cutter Diameter, 16 Straight Teeth, 3/8\ Face Width

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round shanks allow use with a wide variety of toolholding systems.
  • KEO woodruff keyseat cutters are extremely versatile profile milling cutters.
  • Although originally designed to mill standard woodruff keyseat, they now satisfy a variety of applications from milling slots to milling threads.
Check Stock

23pcs Woodworking Chamfer Drilling Tool Set Including 7pcs 3-Point Countersink Drill Bit 8pcs Wood Plug Cutters 6pcs Countersink Drill Bits 1pcs L-Wrench 1pcs Center Punch for Wood

  • 【3-pointed Countersink Drills】- 3-point countersink drill bits include 3mm(0.11"), 4mm(0.15"), 5mm(0.19"), 6mm(0.23"), 7mm(0.27"), 8mm(0.31"), 9mm(0.35"), 10mm(0.39") for drilling pilot holes. Drill tips adopt 3-point design for quick and accurate center punching, large chip flute and five edge chamfer allows faster and easier discharge of sawdust..
  • 【Wood Plug Cutters】- Wood plug set includes 4 standard plug cutters and 4 four-tooth chambered cutters. Their shank diameters are 9.5mm(0.37"), tail diameters size are 6mm(1/4"), 10mm(3/8"), 13mm(1/2") and 16mm(5/8")..
  • 【Countersink Drill Bits】- 1/4" hex 5 flute 90° countersink drill's diameters are 6mm(1/4"), 8mm(5/16"), 9mm(3/8"), 12mm(1/2"), 16mm(5/8"), 19mm(3/4"), 90° angle on the point are designed for sharp and precise countersinking, five-flute designed with staggered cutting teeth can insure free chip flow and rapid chatter free cutting..
  • 【Wide Application】- Our woodworking chamfer drilling tools can be mounted on electric drill, hand electric drill, bench drill, etc. They can be used to drill holes in wood, particle board, fiberboard, logs, plastic boards, PVC pipes, etc..
Check Stock

Fafeicy Carbide Chamfer End Mill, 3 Flute 60° Milling Cutter V Groove Router Bit Tungsten Steel CNC Carving Polishing Router Bit, for Plywood, Soft Wood(D4*60°*50L), Milling Cutter

  • The chamfering mill is mainly used for the 60 ° chamfer or conical hole of the workpiece, and the edges and angles of each surface are champened..
  • This hard alloy chamfered milling cutter unique single-piece design makes debris generated during the cutting process without clogging the tool..
  • The chamfering cutter is of standard size and can be used as aluminum-copper milling tool and engraving milling cutter bit..
  • This hard alloy chamfering cutter uses 3 flute design to complete the processing of tapered surfaces at a time, suitable for small cutting processing..
  • This chamfering cutter has a wide range of applications, suitable for hardwood, plywood, cork, oak, MDF and metal in HRC 55..
Check Stock

Accusize Industrial Tools Annular Cutter Arbor, R8 to 3/4'' Weldon Shank with Coolant System for Drill Use Annular Cutter on on Bridgeport Milling Machine, Mc18-0034

  • R8 to 3/4" Weldon Shank Arbor for Milling Machine, with Coolant System.
  • For Drill Use Annular Cutters on Bridgeport Milling Machine.
  • Fit with Any Size Annular Cutters which Have 3/4'' Weldon Shanks.
Check Stock

Carbide Chamfer Cutter, End Mills Tungsten Steel 3 Flute Chamfer End Mill 90° for Carving for Chamfering(D4*90°*50L)

  • The chamfering tool has standard size and can be used as an aluminumcopper milling cutter tool and an engraving milling cutter head..
  • The professional chamfer design can polish and engrave the workpiece without unloading..
  • The unique one-piece design makes the debris generated during the cutting process easier to fall without clogging the tool..
  • The chamfering tool is mainly used for 90° chamfering or taper hole processing on the workpiece..
  • The chamfering is designed with 3 flutes, which can complete the operation of conical surface at one time, and is suitable for small cutting amount..
Check Stock

Milling Cutter, Fine Workmanship 3.175mm Milling Cutter, SMT for PCB

  • The use of ultra-fine grained cemented carbide materials, with good milling and cutting performance.
  • The cutting edges, milling, holes and edges are of sharpness, with high efficiency.
  • Fine workmanship, clean and tidy surface, no burrs.
  • Including 10pcs milling cutters, convenient to replace and use.
  • Suitable For: PCB, SMT, CNC, mold, plastic fiber, carbon fiber and printed circuit board, etc..
Check Stock

MKFAHIF Zhouqigege T-Slot Milling Cutter Alloy Shank End Mill 8-10mm Shank for Metal Keyway Tool Tungsten Carbide Router Bit (Cutting Edge Length : 12x4Hx8Dx70L)

  • Package Including: 1pc T-Slot Milling Cutters.
Check Stock

CS Unitec | MABasic 200 Portable Magnetic Drill Press | 900W 2-Speed Benchtop Power Drill Machine w/up to 1-3/8" Diameter & 6-1/3" Depth of Cut | Oil Bottle Included

  • R8 to 3/4" Weldon Shank Arbor for Milling Machine, with Coolant System.
  • For Drill Use Annular Cutters on Bridgeport Milling Machine.
  • Fit with Any Size Annular Cutters which Have 3/4'' Weldon Shanks.
Check Stock

ASZLBYM 11pcs RPMT10T3 MOE R5 Indexable Carbide Milling Inserts Blade Milling Cutter with 5/8\/16mm SRDPN1616H10 Indexable Carbide Milling Tool Holder Metal Lathe Cutting Tools

  • PACKAGE INCLUDES : You will receive 1pc SRDPN1616H10 5/8”/16mm shank diameter carbide lathe milling tool holder , 11pcs RPMT10T3 MOE indexable carbide milling inserts cutters and 1pc T15 wrench..
  • Material : The SRDPN1616H10 5/8" lathe milling tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The RPMT10T3 MOE indexable milling inserts cutter material is carbide, and the coating is CVD Al2O3 TICN, It has good toughness, wear resistance and high temperature resistance, the milling insert can be used for milling cast iron, steel parts and stainless steel..
  • Milling tool holder cutter size : Shank Diameter ( length×width ) : 5/8"*5/8"(16mm*16mm).
  • RPMT10T3 MOE carbide milling insert size : Insert Style : RPMT , thickness: 0.156" ≈ 3.97mm , diameter : 0.393≈ 10mm, P=11° degree..
  • Easy to store: the milling tool holder and carbide milling inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock

DINGGUANGHE-CUP T-Slot Milling Cutter Alloy Shank End Mill 8-10mm Shank for Metal Keyway Tool Tungsten Carbide Router Bit Steel (Cutting Edge Length : 25x10Hx12Dx90L)

  • Package Including: 1pc T-Slot Milling Cutters.
Check Stock

Hakkin 20 Pcs Carbide Rotary Burrs Set, End Mill CNC Router Bit, 1/8\ Shank Nano Blue Coating Ball Nose End Mill, Double Cut Coat Rotary Drill for Die Grinder Woodworking, Engraving, Drilling, Carving

  • TUNGSTEN CARBIDE: These end mills are made from high quality tungsten carbide for good hardness ,so these milling cutters have sharp edge..
  • POLISHED AND TITANIUM COATED SURFACE: Well polished and titanium coated surface has a better anti-rust performance.surface is quite clean, neat, and there is no glitches or burrs on the shank..
  • SHARP: These CNC cutter router bits have sharp cutting edges, can be use for milling holes, grooves and edges on plates, smooth cutting..
  • 10PCS/SET: There are 10pcs end mills in this set, great replacement for your drill tools..
  • HANDEL DIFFERENT MATERIAL: These milling cutters can be used to drill many items or materials, such as circuit boards, hardware parts, plastics, copper and stainless steel..
Check Stock

Fevas Module 1 PA20 Degrees Bore 22mm #1-8 HSS Involute Gear Milling Cutter High Speed Steel Gear Milling Cutter Gear Cutting Tools - (Color: 2)

  • Package Includes: 1 X HSS Gear Milling Cutter  | window.adminAccountId=234328740..
  • Specialty cutting tools designed for milling gears..
  • 8 cutters available to suit different numbers of teeth..
Check Stock