Top Clamp Fittings

Grease Gun Coupler, Locks onto Metric and SAE Zerk Grease Fittings, Positive Lock, Fits All 1/8” NPT Type Grease Guns, Quick Disconnect Lever, 10,000 PSI High Pressure, by Tech Team

  • Positive locking quick disconnect for secure attachment and easy release of zerk fittings..
  • The grease gun coupler allows you to put grease into zerks that are difficult to get at and includes an 8” high pressure hose for reaching into tight areas. Flex tube for increased reach..
  • The coupler has a 1/8” NPT thread that is compatible with all types of grease guns manual, electric, and pneumatic..
  • Zerk fittings included to replace clogged, broken, or damaged fittings..
  • Includes one (1) positive lock quick disconnect clamp, one (1) 200 mm flex extension tube, two (2) 90-degree grease fittings, two (2) 45-degree grease fittings, two (2) straight grease fittings, one (1) precision nozzle..
Check Stock

Intex 29061E Type B Pool Accessory Grey

  • Converts Intex pools with 1.25in clamp on fittings to 1.5in screw on fittings.
  • Needed when upgrading from an Intex 530gal/hour or 1,000gal/hour filter pump to an Intex 1,500gal/hour or larger system.
Check Stock

IWISS KG1096 Ratchet Clamp Cinch Tool w/ 50pcs 1/2 in PEX Stainless Steel Clamp Cinch Rings for ASTM F2098

  • Perfect kit for the do it yourself home-owner or the professional looking to get started with PEX plumbing bundle..
  • Comes with great PEX tools that makes it comfortable and easy to work with, it also has the ability to work in hard to reach tight spaces..
  • Both cinch tool and stainless steel clamps are constructed from durable and reliable material to ensure a leak-free connection and long service life..
  • Features a ratcheting mechanism, the clamp tool will not release from the clamp ring unless you make a properly secure connection..
  • Works with brass fittings (per ASTM F1807) and poly fittings(per ASTM F2159) from Sharkbite, Nibco and other brand standard PEX system..
Check Stock

Pexflow PXKT10012 Starter Kit for 1/2-In Pex with Crimper & Cutter Tools - Set includes Brass Elbow & Coupling Fittings, Cinch Clamps, Half Clamps, and 2 Rolls of 1/2-In X 100ft PEX Tubing

  • DIY: Perfect kit for the home-owner or the professional looking to get started with PEX plumbing bundle. Save time looking for all parts needed to get the job done..
  • HIGH QUALITY: Comes with great PEX tools that makes it comfortable and easy to work with. It also has the ability to work in hard to reach tight spaces. Compatible with PEX piping system..
  • TOOLS: 1x PEX Crimper Tool With Lock Hook.
  • 1x PEX Scissor Shear Cutter Tool - Spring-Loaded Handle, Lock Hook & Convenient Carrying Case.
  • FITTINGS: Lead Free Brass Barbed 1/2 inch 90-Degree Elbow Fittings (Bag of 25) + Lead Free Brass Barbed 1/2 inch Straight Coupling Fittings (Bag of 25).
  • TUBING & CLAMPS:1/2 Inch Blue Pex Tubing 100 Feet Coil + 1/2 Inch Red Pex Tubing 100 Feet Coil, Stainless Steel half inch Cinch Clamp Rings (Bag of 100) + Half Clamp with Nail (Bag of 100).
Check Stock

Dorman 800-300 Nylon Fuel Line Repair Kit 104 Piece

  • Kit features professional- quality tool with ergonomic clamp-type grip.
  • Innovative clamp-block design makes joining nylon to nylon barbed fittings easy.
  • Straight and elbow connectors included to tackle the most popular applications.
  • High-quality cutter makes trimming nylon tubes easy.
  • Backed by team of engineers and quality control specialists in the United States.
Check Stock

Bessey VAC-6 Angle Plates (6-Pack)

  • 【SIZE】- Fit Pipe Diameter: 14mm/ 0.55".
  • 【MATERIAL】- Made of 304 high-grade stainless steel. After punching, bending, and integral molding, the structure increases the rib structure to improve the strength of the pipe clamp. Fastened and durable.
  • 【APPLICATION】- Widely used in plumbing, petrochemical, power supply, and other pipeline laying, fixing all kinds of pipelines on wood, masonry, or similar surfaces.
  • 【USAGE】- Choose the corresponding inner height of the pipe clamp according to the OD of the pipe, determine the hole according to the hole dia and position of the pipe clamp, and lock the fastening screw. A layer of soft gasket can be placed on the inner side of the pipe clamp and the pipe fittings, the effect will be better.
  • 【PACKAGE CONTENT】- 20Pcs × Rigid Pipe Straps.
  • Note: Mounting screws are not included here.
Check Stock

CVS 50 PCS 3/4 Inch PEX Cinch Clamp Rings, Stainless Steel Pex Fittings Crimp Rings Pinch Clamps for PEX Tubing Pipe Fitting Connections (3/4 Inch)

  • HIGH QUALITY - Meet ASTM F2098 requirements. Made of 304 Premium Stainless steel material. Salt resistant, anti rust, anti-corrosion..
  • EASY INSTALLATION - Slide the 3/4 inch PEX cinch clamp ring over the pipe, push the pipe onto the fitting and squeeze with your clamp tool. Providing a strong, leak-free and reliable crimp fitting connection..
  • WIDELY USED - Conversancy Brand products’ quality and performance is field-proven. Special design for all PEX pipe connection fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • CERTIFIED - Meet the same standards for all commercial and residential plumbing applications - Hydronic heating system, air condition system, water heater, Telecommunications electrical plumbing, food pipeline system etc..
  • SIZE - 3/4 inch (23.3mm) PEX clamps, fit for 3/4 inch PEX pipe..
Check Stock

Moroso 85469 BREATHER TANK TWO 12AN FITTINGS

  • Use as a remote multi-inlet oil catch/breather for Crankcase Ventilation, Vacuum Pumps, Dry Sump Tanks or Rear Ends.
  • Features Two –12AN Male Fittings that are 180 Degrees apart for ease of plumbing.
  • Aluminum, lightweight tank features internal baffling with mesh media for separation of air and oil.
  • Includes non-hooded, clamp–on filtered breather, Heavy Duty T-Clamp and a bottom petcock drain.
Check Stock

Penck 12 Pack 3/4 Inch Hose Clamps Stainless Steel Clamps Worm-Gear Hose Clamp Miniature Power-Seal Worm-Drive Kit 13-19mm Range

  • 304 Stainless steel worm gear clamp consists of a stainless steel band, housing, and screw..
  • They can adjust the miniature size for fitting small hoses. A worm gear mechanism adjusts the clamp's diameter to precisely apply sealing pressure..
  • The slotted screw allows installation using a blade screwdriver, nut driver, or socket wrench. Hose clamps attach hoses to fittings to prevent flow leakage. They come in a variety of designs and distribute uniform pressure over the circumference of hoses to bind them to fittings..
  • Worm Gear Hose Clamps are flexible and ductile with wide adjustable size about 1/2'' - 3/4'' (13-19mm). Fit for hose outside diameter 1/2'' - 3/4'' (13-19mm)..
  • You Can Adjust The Size According To Demand, Worm Friction Is Small, Lock Secure And Tight..
Check Stock

Strapping Kit, 29.9 mil, Polyester

  • Set of 10 preformed clamps can be used to attach hoses to pipes or fittings or secure insulation, cables, wires, or other items.
  • Made of 201 stainless steel, which is stronger than 316 stainless steel but less resistant to corrosion.
  • quarter hard temper makes it suitable for bending and shaping.
  • Smooth interior helps provide a snug fit to minimize leaks.
  • hood over lock helps prevent it from getting snagged.
  • Each clamp measures 3/4" wide, 3/100" thick, and 9" in diameter on the inside.
Check Stock

Yescom PEX One Hand Cinch Clamp Tool Ratchet Clamping Pinch Wrench Crimper 3/8″ to 1″ Stainless Steel Pinch Clamp ASTM

  • [Great Compatibility]: PEX cinch clamp tool kit meets the ASTM F2098 standard and includes 1pc cinch clamp tool, 1pc Allen key, 1pc calibration tool for creating secure stainless steel clamp connection with PEX fittings in PEX piping system.
  • suitable for cinch clamp size ranging from 3/8″ to 1″.
  • [One Hand Ratchet Design]: Ratcheting design reduces incorrect connections, easy to turn the release button for auto-releasing the ratchet, clamp tool will not release from the clamp ring unless the connection has been made, perfect for saving labor and operating the tool with one hand.
  • [Easy to Use]: LED indicator on the tool for helping to check the connection is completed or not, LED light comes on when the clamp is fully engaged, great for ensuring the connection is proper and secured.
  • [Durable & Ergonomic]: Hardened carbon steel construction for ensuring reliability and durability, suitable for long time use.
  • handles with rubber grip for comfortable holding and reducing fatigue, accommodate gloved and bare hands.
  • [Calibration & Wide Application]: Allen key for adjusting the jaw gap and calibration gauge with 1.4mm side and 1.2mm side for measuring the jaw space.
  • widely used for using in tight space such as PEX tubing connection, plumbing, manifold instal....
Check Stock

IWISS Ratcheting PEX Cinch Tool for Fastening Stainless Clamps from 3/8-Inch to 1-Inch with Calibration Gauge Suits ASTM F2098 and Non F2098 Ear Hose Clamps

  • Purpose: IWISS KG-1096 full-size clamp tool is designed to clamp 3/8-in, 1/2-in, 5/8-in, 3/4-in and 1-in stainless-steel PEX clamp rings onto PEX....
  • Ratchet Mechanism: Ratcheting action to make complete cinch and gauge free clamping. will not disengage until a uniform crimp is completed or the....
  • Capability: For the creating secure stainless steel pinch clamp connections in combination with PEX barb fittings within PEX piping systems in sizes....
  • Applications: Perfect for the DIY homeowner or the professional looking for the perfect way to get started with PEX plumbing. Suitable for making....
  • Fits all PEX cinch clamps except for Zurn Quick Clamp. Ideal for connecting ear clamps to hose..
Check Stock