Top Clamps Steel Clamp

Complete Ball Joint Lower and Upper Kit for Honda TRX500FA 2001-2016 All Balls

  • 【Universal Fit】Ideal for installing clamps on fuel filters, water pumps, CV joint boots,ATV axle boot and other cooling system hoses.This CV joint axle boot clamp plier fits most of cars..
  • 【With 20PCS CV Boot Clamp】 10X small clamps and 10X big clamps is included.Made of stainless steel, with high toughness and adjustable length.It's perfect for you to replace the car broken drive shaft CV boot clamp..
  • 【High-quality Materials】The pliers are made of high-quality stainless steel as a whole, which is durable, corrosion-resistant, oil-resistant, high-temperature resistant, and has a long service life. The clamp head undergoes a quenching process for higher hardness. Equipped with an ergonomically designed non-slip insulated handle, it is practical and comfortable..
  • 【Simple & Easy To Use】Crimp the clamp and then push down on the crimp to lock into place. It's a good partner of a 1/2" extension handle or torque wrench..
  • 【Package Includes】10X Small Clamps, 10X Big Clamps & 1X Pliers Tool. The clamp and tool set can be used directly, which is convenient and worry-free..
Check Stock

DIY Your Odd Sizes Band Hose Clamp Assortment Kit 14 FT Straps with 10 Fasteners Large Long Adjustable Worm Gear Screw Hose Clamps Stainless Steel Duct Clamp Pipe Clamp Metal Strapping

  • Cost-effective: This stainless steel hose clamps assortment is a home improvement items you can make any sizes of metal clamps and save more from the price of pre-made worm drive hose clamps..
  • Quality Fasteners: Our band clamps will not be easily bent and stripped out when tightening. The min.ultimate torque is 58 lbf-in. The hex size of screw clamp is 5/16 inch..
  • All 304 SS: The 1/2" wide metal straps and 10 worm clamp fasteners are all made of real 304 stainless steel which are anti-corrosive, reusable and ideal for outdoor use. The screw is 304 stainless too, not carbon steel..
  • Easy To Use: Following the directions included, you will set up the adjustable clamp very fast. Connect the metal strap with hose clamp fasteners, get large hose clamp 10 inch 12 inch 14 inch 16 inch 18 inch 20 inch 24 inch 30 & 40 inch extra large!.
  • Widely Used: Our stainless hose clamp assortment set can diy hose clamps in min.2.5 inch and max.53 inch diameter for any pipe clamp duct clamp plumbing, metal strapping banding for round posts, segmented wood, muffler heat shield. It work better than long metal zip ties as it's easy to release and reusable for more projects!.
Check Stock

Dorman 614-030 Uni-Fit C.V. Joint Boot Air Powered Installation Tool Universal Fit

  • 【Universal Fit】Ideal for installing clamps on fuel filters, water pumps, CV joint boots,ATV axle boot and other cooling system hoses.This CV joint axle boot clamp plier fits most of cars..
  • 【With 20PCS CV Boot Clamp】 10X small clamps and 10X big clamps is included.Made of stainless steel, with high toughness and adjustable length.It's perfect for you to replace the car broken drive shaft CV boot clamp..
  • 【High-quality Materials】The pliers are made of high-quality stainless steel as a whole, which is durable, corrosion-resistant, oil-resistant, high-temperature resistant, and has a long service life. The clamp head undergoes a quenching process for higher hardness. Equipped with an ergonomically designed non-slip insulated handle, it is practical and comfortable..
  • 【Simple & Easy To Use】Crimp the clamp and then push down on the crimp to lock into place. It's a good partner of a 1/2" extension handle or torque wrench..
  • 【Package Includes】10X Small Clamps, 10X Big Clamps & 1X Pliers Tool. The clamp and tool set can be used directly, which is conv....
Check Stock

Fulton Spring Clamp Pliers with 13 Spring Clamps and Hip Clip Made in the USA

  • If you have ever attempted to firmly secure and clamp mitered corners then you know what kind of a challenge it can be to say the least. You could always try those large, cumbersome and very expensive parallel clamps to try and work each corner just right to hold your mitered corners together. That too can be extremely challenging and not to mention very costly..
  • The Fulton Miter Spring Clamps are the ideal and cost effective way to quickly and easily clamp mitered corners without all of the hassle you typically have with other clamps. The Spring Miter Clamps are made from a high strength steel. The clamps can be applied using your hand to squeeze the clamp to open the sharp, pointed tips or you can use the Miter Spring Pliers to make it super easy to to spread the tips apart..
  • Once you have the clamp tips spread apart, simply place the spring clamp onto the mitered corner you need to secure, then release the clamp so the tips pierce into the wood and keep your stock in place. Depending on the size of your project, you may need to use more than one spring clamp on each corner to hold your stock in place..
  • Unlike other available spring clamps, the Fulton Miter Spring Clamps don’t cut into your stock piece. The uniquely designed tips are designed to pie....
Check Stock

ISPINNER PEX Crimping Tool Clamp Cinch Crimp Tool Crimper for Stainless Steel PEX Clamps from 3/8 to 1 with 40pcs PEX Crimp Rings 3/8 1/2 3/4 1

  • 【HIGH QUALITY】This PEX Clamp Tool is made from durable high quality material steel with forging process to ensure integrated mechanical property....
  • 【UNIVERSAL】Meets ASTM 2098 standard. Compatible to work with all brand stainless steel clamps with sizes 3/8", 1/2", 5/8", 3/4" and 1"..
  • 【DURABLE】The stainless-steel clamp rings provided in this cinch clamp tool kit resist corrosion more effectively than other crimp rings, which can....
  • 【EASY TO USE】PEX Crimp Tool features a comfort grip which makes PEX installation easier. It is suitable for making copper crimp ring connections....
  • 【PACKAGE INCLUDES】1pc x PEX Clamp Cinch Tool, 10pcs x 3/8" PEX Clamps, 15pcs x 1/2" PEX Clamps, 10pcs x 3/4" PEX Clamps, 5pcs x 1" PEX Clamps..
Check Stock

5pack Hold Down Toggle Clamps Woodworking,201B Clamps for Woodworking,Vertical Clamp,Cam Clamp Quick Release Toggle Clamp for CNC Hold Down Clamps,200Lbs Heavy Duty Toggle Clamp for T Track Cam Action

  • Holdfast Clamp:Quick-release horizontal toggle clamps with rubber tips,cam lever hold down clamp for cnc workholding clamps.Quick release clamp with non-slip oil- and stain-resistant red vinyl solid handle is easy for woodworking clamps..
  • Large Toggle Clamp:90.7Kg/200Lbs heavy duty clamps with solid grip.This 201b toggle clamp is adjustable toggle clamp by screw down clamps lever.It's perfect for t track cam action hold down clamp..
  • Material : Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
  • Clamp Spesifics: Whole size of clamp 201B 5.90"x3.74"x1.41".
  • Length of large toggle clamp foot including rubber 1.88".
  • Wide Range of Uses: Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..
Check Stock

PATACO 85Pcs 304 Single Ear Hose Clamps Stainless Steel,6-25.6mm Stepless Hose Clamps with Oetiker Clamps Plier and Gloves,Cinch Rings Crimp Hose Clamps Assortment Kit for Pipe,Plumbing,Automotive Use

  • ✅High quality - single ear hose clamps stainless steel made of 100% 304 stainless steel. The 304 stainless steel very sturdy, strong and reliable.
  • salt resistant, anti-rust, anti-corrosion, waterproof, oil-proof, heat resistance, oxidation resistance and mechanical properties. for long-term use..
  • ✅Clamps design - single ear hose clamps are flexible and ductile. 360 ° stepless design - there is no protrusion and gap in the inner, narrowband design providing a more concentrated sealing pressure. cochlear design ensures continuous clamping during temperature changes or machine vibrations, edge polished smooth, avoid damage to the hose. the clamping effect is obvious and stronger than that of the traditional screw type clamp..
  • ✅9 Popular clamp sizes – this single ear hose clamps stainless steel adjustable size range from 6 to 25.6mm, covers 9 sizes: 6-7mm, 7-8.7mm, 8.8-10.5mm, 10.3-12.8mm, 12.8-15.3mm, 15.3-18.5mm, 17.8-21.0mm, 20.3-23.5mm, 22.4mm-25.6mm. pataco radiator hose clamps are used in securing hoses, the hose of the car, home appliance line, machinery equipment, pipe, cable, tube, fuel lines. perfect to apply in automotive, industrial, boat/marine, shield, household, water line clamps, heater hose clamps,etc.
Check Stock

240pcs Single Ear Hose Clamps, 6-23.5mm Crimp Hose Clamps with Ear Clamp Pincer, Stainless Steel Single Ear Hose Clamps, Crimp Clamps Assortment Kit for Securing Pipe Hoses Plumbing

  • 【Crimping Tool Kit】- Single ear hose clamp set include 1pcs ear clamp pincer, 240pcs single ear hose clamps(30pcs each size), their size are: 6-7mm, 7-8.7mm, 8.8-10.5mm, 10.3-12.8mm, 12.8-15.3mm, 15.3-18.5mm, 17.8-21.0mm and 20.3-23.5mm, they are widely used to seal various types of hoses..
  • 【360° Seal Design】- Our PEX cinch clamps are made of high quality 304 stainless steel. Single ear hose clamps with smooth inner circumference have 360° good sealing and fastening state, special cochlear design provides a strong thermal expansion compensation function, which can makes the hoses always sealed regardless of the size change of the hose..
  • 【Ear Clamp Pincer】- Ear clamp pincer is made of Chrome vanadium steel with high frequency induction hardening, the max jaw opening size is 1 inch, it can be used to clamp single ear hose clamps and double ear hose clamps..
  • 【Easy to Use】- PEX cinch clamp fastening tool is easy to use. You just need to cut pipe, install PEX fitting/other pipe and crimp ring, use cinch tool tighten single ear hose clamp and the installation is complete..
Check Stock

Selizo 12Pcs Hose Clamps 4 Inch Hose Clamp 304 Stainless Steel Hose Clamps Duct Clamp Worm Gear Adjustable 91-114mm Hose Clamp Fuel Line Clamp for Plumbing Automotive and Mechanical Applications

  • PACKAGE INCLUDES: The stainless hose clamp kit comes with totally 12 pieces hose clamps with adjustable size range from 91 mm to 114 mm, perfect for hose outside diameter 91-114mm / 3.6-4.4 inch.
  • 304 STAINLESS STEEL HOSE CLAMP –The hose clamp is made of high quality and premium heavy duty 304 stainless steel material that are more salt resistant, anti-rust, anti-corrosion, water proof, oil proof than other 201 stainless steel. Solid and sturdy material ensure the adjustable hose clamps last a long time for use.
  • FLEXIBLE ADJUSTABLE SIZE RANGE – The 4-inch hose clamps stainless steel can be adjusted from 91-114mm / 3.6-4.4 inch. Flexible and ductile for use.
  • EASY TO INSTALLL AND REUSABLE – The stainless clamps designed with a worm gear mechanism to adjust the clamp’s diameter to precisely apply sealing pressure. It attaches hoses for fitting hoses in confined spaces to prevent flow leakage. The clamp hose also can be recycled and reused due to the 304 stainless steel material which makes them worked last for long.
  • WIDELY USED – The spring hose clamps are used in securing ducting, dryer vent, hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, electronic or home applications.
Check Stock

Ear Clamp Pliers with 12pcs Single Ear CV Boot Clamps Band Tool Kit, Ear Clamp Pincer, Ear-Type Clamp Crimp Hand Tool Ear Type CV Joint Axle Boot Clamp Pliers Tool for Auto ATV UTV

  • Crimping Plier Tool: Heavy-duty Ear Clamp Pincer equipped with front steel jaw and non-slip grip handles which is convenient for your installation, widely applied to single ear hose clamps, double ear clamps. Ideal for installing band style boot clamps on fuel filter, water pumps, cv joint boots, ATV axle boot, steering racks, drive shafts and other cooling system hoses. The thin head design permits good accessibility in confined areas and will not damage the press points on the ear clamps..
  • Clamp Size Are Adjustable: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275″ (7mm) in width & 0.023″ (0.6mm) in thickness, Large-Adjust diameter from 1.96-4.72 inch(50-120mm), 0.354″ (9mm) in width & 0.031″ (0.8mm) in thickness..
  • Material: The CV boot clamp tool is made of high quality 304 stainless steel that are more salt resistant, anti-rust, anti-corrosion than other 201 stainless steel, Loose or damaged clamp can be harmful to your automobile and create grease spills, the new clamps can help you reseal and fastened to prevent leakage..
  • Function and Use: These clamps are locking secure and tight on drive & CV Axle. They are good for you to replace the car broken drive shaft CV boot clamp..
  • What You’ll Get: 1Pcs Ear Clamps Pliers, 6Pcs Small CV....
Check Stock

Hose Clamp, Stainless Steel Hose Clamps for 1 Inch to 2 Inch Hose Pipe Large Adjustable Worm Gear Hose Clamps Assortment Kit for Automotive Radiator Fuel Line, Mechanical, 10 PCS Hose Clamp Set

  • Wide Range of Sizes --- Hose clamp set clamping range: 1/4 inch, 1/2 inch, 3/8 inch, 5/8 inch, 1 inch, 2 inch, 1-3/5inch, 2-1/2 inch. Stainless steel clamps with various size can meet your different clamping requirements..
  • High Quality --- Stainless Steel Hose Clamps made of thick SUS 304 stainless steel (including band, housing and screw), has the features of corrosion-resistant, anti-rust, salt resistant, waterproof and oil proof. Hose clamp kit, sturdy, durable, reusable, no longer worry about them rusting and breaking..
  • Excellent Workmanship --- The Worm drive Hose clamps with shiny silver and smooth edge, no scratch to your hose. Unique rectangular hole design, high torque, secure hold and smooth drive. Hose clamp assortment has clamping range from 1/4 inch to 2-1/2 inch (6mm-64mm), no cut, effectively to clamp any hose of different size..
  • Easy To Install --- Hose clamp large and small size both have pre-assemble hose clamp fasteners, easy to tighten locking or quick release the clamp. With through hole process design, just need to use a hose clamp driver to loosen the screw, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • Wild Application --- Worm gear hose clamps are widely applic....
Check Stock

Hose Clamp, Stainless Steel Hose Clamps for 1 1/2 Inch to 2 1/2 Inch Hose Pipe Large Adjustable Worm Gear Hose Clamps Assortment Kit for Automotive Radiator Fuel Line Mechanical, 10 PCS Hose Clamp Set

  • Wide Range of Sizes --- Hose clamp set clamping range: 1/4 inch to 1/2 inch, 3/8 inch to 5/8 inch, 1 inch to 2 inch, 1-1/2inch to 2-1/2 inch, the various size stainless steel clamps help you easy to clamp different size hose or pipe..
  • High Quality --- Stainless Steel Hose Clamps made of thick SUS 304 stainless steel (including band, housing and screw), has the features of corrosion-resistant, anti-rust, salt resistant, waterproof and oil proof. Hose clamp kit, sturdy, durable, reusable, no longer worry about them rusting and breaking..
  • Excellent Workmanship --- The Worm drive Hose clamps with shiny silver and smooth edge, no scratch to your hose. Unique rectangular hole design, high torque, secure hold and smooth drive. Hose clamp assortment has clamping range from 1/4 inch to 2-1/2 inch (6mm-64mm), no cut, effectively to clamp any hose of different size..
  • Easy To Install --- Hose clamp large and small size both have pre-assemble hose clamp fasteners, easy to tighten locking or quick release the clamp. With through hole process design, just need to use a hose clamp driver to loosen the screw, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • Wild Application --- Worm gear hose clamps are w....
Check Stock