Top Cleanroom Supply

100pcs 4.92\ Cleanroom Double-Layer Microfiber Swabs for Printer Inkjet Printhead Optical Lens/PCB/BGA/Electronics (707-Microfiber Swab)

  • Mircrofiber Cleaning Swabs CK-MS707 features a large rectangular head rigidly sealed to a long compact handle forming firm support on cushioning the foam. Its double layer knitted microfiber head possesses excellent solvent-holding capacity and durability..
  • Laundered and packed under an Class 100 Cleanroom, Free from organic contaminants such as silicone, amide and phthalate esters..
  • Specifically designed for generally purpose cleaning of large surfaces. Excellent choice for cleaning on Thermal print head, Check Scanner or Reader transport rollers, opto-electronic sensors and Inkjet print head..
  • Its double layer knitted microfiber head possesses high level of cleanliness and Excellent solvent resistant and the long rigid polypropylene handle provides good control and ease of use..
  • More cleanroom swabs and cleaning products please visit our cleansky..
Check Stock

100pcs 2.677\ Cleanroom Polyester Tip Cleaning Swabs for Camera Sensor, Optic Lens, Headphone Jack, Precision Instrument, Electronics CK-PS743 (100)

  • CKPS743 Small Polyester Tip swab designed for removal of contamination from surfaces in cleaning of tiny hard to reach area， features excellent particle and entrapment and retention.
  • enables access to very small areas and crevices..
  • Especially in tiny places for removing flux and adhesive tape and excess dust engine oil contaminant and leave without dust and lint..
  • The polyester is thermally bonded to the handle, thus, eliminating the use of contaminating adhesive or coatings. Laundered and packed under an Class 100 Cleanroom, The polyester exhibits low particles and ion content.free from silicone, amide and DOP..
  • It has excellent compatibility with most solvents including acetone as well as excellent absorbency and solvent-holding capacity ..
  • More cleanroom foam swabs and cleaning products please visit our cleansky..
Check Stock

YAEHA Sticky Mats for Cleanrooms, Walk Off Tacky Mats for Construction Warehouse Garage 24'x36' Blue (4 Pads, 30 Sheets Each)

  • Keep Clean Room - Place sticky mat at the main cleanroom entrance, removes dust from passing foot-traffic and equipment wheels and stick to the mat as you pass by..
  • Easy To Use - Simple To Use - Full size adhesive back can stick directly to the clean floor , easily fixed in the place where need clean, and can easily clean shoe sole when passing by. Tacky adhesive floor sticky pads..
  • Continuous Cleaning - Sticky mats with labels of 30#, tear off dirt sheet then you can use a new clean sheet again,continually keep clean 30 times..
  • Daily Usage - Cleanroom sticky dust mat can be used to catch dust or pet hair, suitable for construction, basketball court, club, gymnasium, shopping center, commercial warehouse and other areas that often pass by..
  • Clean Combo Package - 4 sticky mats per box, 30 sheets each,one sheet one day, continuous cleaning for 120 days..
Check Stock

AAwipes Cleaning Swab Sticks 100pcs 3.2mm Head Width Mini Superfine Fiber Clean Tips for Electronics/Semiconductor, Optical Lens

  • 【Good Quality】AAwipes Small Pointed Microfiber swab is equipped with double layer knitted microfiber head, possesses high level of cleanliness and excellent solvent resistant and is the ideal swab to use to effectively in eliminating contamination on surfaces and hard to reach areas..
  • 【Great For Micro Work】 AAwipes Pointed Tipped Superfine Fiber Clean Tips works well in magnification or micro work. Suitable for cleaning small grooves and grooved areas for removing flux and excess dust engine oil contaminant and leave without dust and lint..
  • 【High Cleanroom Class】Produced and packed under an Class 100-1000 Cleanroom, the Microfiber exhibits low particles and ion content, free from silicone, amide and DOP..
  • 【Excellent Compatibility】These cleaning swab sticks have excellent compatibility with most solvents including acetone as well as excellent absorbency and solvent-holding capacity ..
  • 【Multiple Uses】Swabs are also great to use around the house such as Inkjet Printer, Camera, Optical Lens, Guns..
Check Stock

Cleanroom Wipes Nonwoven Wipers Cellulose/Polyester Blend 12\ x 12\ (Bag of 150 Pcs) for Lab, Electronics, Pharmaceutical, Printing and Semiconductor Industries

  • ...are of cristical importance, Excellent for picking up aqueous or oil spills. Suitable for cleaning percision components and lab apparatus. Low unit cost with repeatedly use and premium quality..
  • APPLICATIONS: - Wiping precision components like lens.
  • - Cleaning lab apparatus. - Wiping work station surface.
  • PACKAGE：12" Length x 12" Width, 150 wipers/bag. They are all treated with proper edge treatment and sealed in poly bags. Nonwoven Wiper, Cleanroom Wipes, Lab wipes, Multi-functional Wipes, Lens wipes, Kitchen Wipes.
  • CUSTOMER'S DESIGN: We also provide customized production for different wipes with the unlimited choices in sizes,cleanliness levels, packaging options, and dispensing options to suit your cleanroom supplies needs. (Small Order Acceptable, ODM Accepted, OEM Accepted)..
Check Stock

Digital Hygro-Thermometer with Bluetooth Connectivity (Range: 14 to 140℉ & 0 to 100% RH) for Cleanroom, Workplace, Storage Area, HVAC | Model: Extech RH250W

  • Transmission Distance: 003e10 m up to 90 m line of sight | Power 3 x AAA (1.5 V) battery | Operating Condition: 0 to 40°C (32 to 104°F), ≤80% RH | Dimensions: 150 × 53 × 28 mm | Weight : 2.8 oz (80.5 g).
  • Supply Scope: 1 unit of Extech RH250W with Instruction manual | Applications: Cleanroom air humidity, workplace inspection, storage area inspection, building health, building comfort, HVAC equipment check, appliance testing, research and development, and engineering and design, etc..
Check Stock

100pcs 2.75\ Small Semi-Flexible Tip Cleanroom Foam Swabs for Printer, Optical Lens, Electronics, Detailling CK-FS757 (100)

  • ...ery small areas and crevices. Especially in tiny places for removing flux and adhesive tape and excess dust engine oil contaminant and leave without dust and lint..
  • ✅ The foam is thermally bonded to the handle, thus, eliminating the use of contaminating adhesive or coatings. Laundered and packed under an Class 100 Cleanroom, The foam exhibits low particles and ion content.free from silicone, amide and DOP..
  • ✅ It has excellent compatibility with most solvents including acetone as well as excellent absorbency and solvent-holding capacity that enables the swabs to resis corrosion during the cleaning, enabling fast absorption of contaminants onto the swab head..
  • ✅ Competent as camera sensor cleaning swabs, optical lens cleaning swabs, printer cleaning swabs, printed circuit board cleaning swabs, electronics cleaning swabs, jewelry cleaning swabs, arts&crafts cleaning swabs, gun/firearm cleaning swabs, ect..
  • ✅ More models of cleanroom foam swabs and cleaning solutions please visit our 【Cleansky】.
Check Stock

AAWipes Lint Free Wipes Cleanroom Wipes Nonwoven Auto Paint Prep Wipes Cellulose/Polyester Blend (9"x9" 300 Pcs, 56 GSM) General Purpose Lab Wipes Chem Wipes Automotive Wipes Dustless Wipes (CP05609)

  • The hydro-entangled process creates a non-woven fabric that is soft and gentle, making it ideal for cleaning delicate surfaces..
  • The blend of cellulose and polyester fibers gives the wipes excellent wet and dry strength, allowing them to retain their shape even when wet and hold up under pressure..
  • The wipes are 56 gsm in weight, 9 inches by 9 inches in size, and come in a pack of 300. They are an economical version of the company's 68 gsm wipes but are still highly absorbent and suitable for heavy-duty cleaning..
  • The cleanroom wipes are designed to meet cleanroom standards and are appropriate for use in environments that require a high level of cleanliness..
  • The company offers various customization options, including different packaging options and dispensing options, to meet specific customer requirements, such as cleanliness levels or specific use cases..
Check Stock

2.75'',Long Spiral Pointed Tip Cleaning Swab Lint Free Screw Head Cleanroom Foam Swab for Camera, Optical Lens, Electronics, Printhead, Automotive Detailing CK-FS752 (100)

  • ...ery small areas and crevices. Especially in tiny places for removing flux and adhesive tape and excess dust engine oil contaminant and leave without dust and lint..
  • ✅ The foam is thermally bonded to the handle, thus, eliminating the use of contaminating adhesive or coatings. Laundered and packed under an Class 100 Cleanroom, The foam exhibits low particles and ion content.free from silicone, amide and DOP..
  • ✅ It has excellent compatibility with most solvents including acetone as well as excellent absorbency and solvent-holding capacity that enables the swabs to resis corrosion during the cleaning, enabling fast absorption of contaminants onto the swab head..
  • ✅ Competent as camera sensor cleaning swabs, optical lens cleaning swabs, printer cleaning swabs, printed circuit board cleaning swabs, electronics cleaning swabs, jewelry cleaning swabs, arts&crafts cleaning swabs, gun/firearm cleaning swabs, ect..
  • ✅ More models of cleanroom foam swabs and cleaning solutions please visit our 【Cleansky】.
Check Stock

3.0\ PCB Board Cleaning Swabs, Cleanroom Lint Free Pointed Foam Tip Swab for Camera, Optical Lens, Electronics, Detailing, Small Hole and Hard-to-Reach Area CK-FS750 (100)

  • ...ery small areas and crevices. Especially in tiny places for removing flux and adhesive tape and excess dust engine oil contaminant and leave without dust and lint..
  • ✅ The foam is thermally bonded to the handle, thus, eliminating the use of contaminating adhesive or coatings. Laundered and packed under an Class 100 Cleanroom, The foam exhibits low particles and ion content.free from silicone, amide and DOP..
  • ✅ It has excellent compatibility with most solvents including acetone as well as excellent absorbency and solvent-holding capacity that enables the swabs to resis corrosion during the cleaning, enabling fast absorption of contaminants onto the swab head..
  • ✅ Competent as camera sensor cleaning swabs, optical lens cleaning swabs, printer cleaning swabs, printed circuit board cleaning swabs, electronics cleaning swabs, jewelry cleaning swabs, arts&crafts cleaning swabs, gun/firearm cleaning swabs, watch &clock cleaning swabs, fishing reels cleaning swabs ect..
  • ✅ More models of cleanroom foam swabs and cleaning solutions please visit our 【Cleansky】.
Check Stock

Multi-Purpose Cleanroom Foam Tip Cleaning Swab Kit for Camera, Optical Lens, Arts and Crafts, Painting, Gun, Printer, Automotive Detailing CK-FS100 (Multi-Size kit)

  • ...ery small areas and crevices. Especially in tiny places for removing flux and adhesive tape and excess dust engine oil contaminant and leave without dust and lint..
  • ✅ The foam is thermally bonded to the handle, thus, eliminating the use of contaminating adhesive or coatings. Laundered and packed under an Class 100 Cleanroom, The foam exhibits low particles and ion content.free from silicone, amide and DOP..
  • ✅ It has excellent compatibility with most solvents including acetone as well as excellent absorbency and solvent-holding capacity that enables the swabs to resis corrosion during the cleaning, enabling fast absorption of contaminants onto the swab head..
  • ✅ Competent as pistol/gun/firearm cleaning swabs, camera sensor cleaning swabs, optical lens cleaning swabs, printer cleaning swabs, printed circuit board cleaning swabs, electronics cleaning swabs, jewelry cleaning swabs, arts&crafts cleaning swabs, ect. Full depth cleaning of all components of contaminant items that need cleaning..
  • ✅ More models of cleanroom foam swabs and cleaning solutions please visit our 【Cleansky】.
Check Stock

Cleanroom Wipes Nonwoven Wipes Cellulose/Polyester Blend (Grade A, 68 Gram) 9\ x 9\ (Bag of 300 Pcs) for Lab, Electronics, Pharmaceutical, Printing and Semiconductor Industries

  • ...ove excess solder paste on the circuit board, it can keep the circuit board spotless, optical instruments to manufacture a variety of electronic, electrical, precision instruments wipe. Cleaning of printing machines.
  • PACKAGE：9" Length x 9" Width, 300 wipers/bag. They are all treated with proper edge treatment and sealed in poly bags..
  • CUSTOMER'S DESIGN: We also provide customized production for different wipes with the unlimited choices in sizes,cleanliness levels, packaging options, and dispensing options to suit your cleanroom supplies needs. (Small Order Acceptable, ODM Accepted, OEM Accepted)..
Check Stock