Top Clear Coat For Carbon Fiber

ZXFOOG Carbon Fiber License Plate Frame- 100% Handcrafted Real Carbon Fiber Cloth Wrapped Holder, Slim Black Aluminum Car Tag Cover with Stainless Steel Screws Caps, Rattle Proof Pad, 1 Pack 4 Hole

  • Rust Proof Carbon Fiber Frame- The 4 hole frame is made of aluminum material, and the surface is covered with 100% real carbon fiber cloth. Grinded and polished by hand through 16 procedures, glossy finish with UV Protection clear coat to protect frame. Heavy duty aluminum metal frame will withstand Car Washes, anti-corrosion, anti-rust, weather resistance, can well protect the license plate rust proof. Comes in 1 pack for front bumper or trunk license plate.
  • Fit American Universal License Plate- slim License plate frame design, size 6.25" x 12.25.
Check Stock

Personalized Custom Carbon Fiber Pattern License Plate Frame

  • Custom Made Carbon Fiber Look License Plate Frame With Your Own Top and Bottom Text No Vinyl Used.
  • UV and water-resistant design printed on front.
  • Universal Fit Cut-out corners avoids covering up state registration stickers.
  • Fits USA, Mexico and CANADA Standard Size 6.25" x 12.25".
  • Glossy Finish With UV Protection Clear Coat to Protect Frame, Comes with Screws, Screw Caps and Screw Driver for Easy Clean Installation.
Check Stock

Finish Line Fiber Grip Carbon Fiber Bicycle Assembly Gel, 1.75-Ounce Tube

  • Fiber Grip(TM): Carbon Fiber Assembly Gel is specially designed to reduce slippage between clamped carbon fiber surfaces. Fiber Grip eliminates the need to over tighten clamps to achieve secure connections..
  • Apply Fiber Grip in a thin film to clamping areas of stems, handlebars, seat posts, and seat tubes to eliminate the need for over tightening, which can cause internal fractures and fatigue of carbon fiber parts..
  • Tested and approved by leading carbon fiber component manufacturers. Clear, Non-staining Non-Toxic.
Check Stock

HANSSHOW Compatible Tesla Model 3 / Y Dashboard Cover Wrap Real Carbon Fiber, Matte and Gloss Black, 3K Toray Dry Carbon Fiber for Tesla Model 3 2018-2023 and Model Y 2020-2023 (Matte Carbon Fiber)

  • 3K Carbon Fiber Cloth: Carbon fiber 3K is a new type of carbon fiber material with high strength and high modulus fiber with carbon content of more than 95%. Its density is only 1.6G/CM3, which is lighter..
  • Toray Carbon Fiber: Adopt Japanese Toray carbon fiber cloth, with clear lines and long service life. The resin backflow will not produce bubbles, and the carbon cloth pattern will not be deformed and distorted..
  • Dry carbon fiber: Dry carbon fiber has less residual resin, more uniform resin, light weight and high strength..
  • Workmanship: Autoclave dry carbon workmanship..
  • If damaged during shipping, please contact us to send a replacement..
Check Stock

Carbon Fiber License Plate Frame - Aluminum License Plate Frames Handmade Covering 100% Real Carbon Fiber | Stainless Steel Tamper Proof License Plate Screws ,CF Cover | 4 Hole Slim Frame 1 Pack

  • ✅【Customize Carbon Plate Frame】: Genuine Carbon Fiber License Plate Frame-100% by the hand customize, Made of black Aluminum License Plate Frames covered with real carbon fiber cloth, Super Quality, very nice twill weave pattern! Stronger than the true 100% carbon fiber license plate frame,Improves the look of your car and matches other high quality carbon fiber parts you may have on your car!.
  • ✅【Very Cool License Plate Decoration Effect】：High Gloss Clear Finish with protective coating. The Smooth shiny surface really pops! Frame suitable for BMW license plate, Mercedes Benz, AMG, 4RUNNER, AUDI, LEXUS, Front license plate frame or rear frames installation.
  • ✅【Fits Usa And Canada License Plate 】:License Plate Frame Carbon Fiber Standard Sizs 6.25" x 12.25"，It will not block any letters, Numbers or stickers of the license plates.Grinded and polished by hand through 16 procedures，Will be REAL 100% carbon fiber cloth the package is made on an aluminum license plate frame. than the true 100% carbon fiber license plate frame, No cracking deformation.PLEASE NOTE: This carbon fiber license frame is NOT 100% REAL CARBON FIBER FRAME.
  • ✅【Anti-Theft Plate Frame】: Tamper-proof license plate screws kit, to prevent the theft of your license....
Check Stock

Fibre Glast Carbon Fiber Cloth – High Strength Lightweight Aerodynamic Graphite Fabric for Auto, Aerospace, Boat Builds & Repairs – Epoxy & Resin Compatible, Black, 10-12 Oz, 3 Yards – Made in USA

  • (24oz) Clear glue epoxy -2 part Resin (A) - Hardener (B) 1:1 mix ratio. Easy to use epoxy resin kit.
  • UV epoxy resin - won't fade or yellow from sunlight. Crystal clear resin epoxy liquid glass epoxy.
  • Slower setup time for longer usable pot life - High strength hold with a high gloss. Great resin kit for beginners. Resin starter kit..
  • Use as Fiberglass resin, Carbon Fiber fabric, clear coat surfaces and won't fade.
Check Stock

Single Side Eyelid Tape Stickers, Medical-use Fiber Eyelid Lift Strip, Perfect for Hooded, Droopy, Uneven, or Mono-eyelids （336Pcs）

  • 【Brilliant Compatibility】Carbon Fiber Headlight Eyebrow Cover Specially fit for Infiniti Q50 2014‑2019, can gives your car a sporty look, brings a sense of luxury and glory..
  • 【Excellent Performance】Carbon Fiber Headlight Eyebrows Eye Lid Sticker Durable and sturdy, has superior anti‑backlash and wear‑resistant properties, rustproof and colorfast for better decorative effect..
  • 【Easy to Install】Carbon Fiber Eyelids Headlight Eyelid Trim Easy to maintain and clean, simple installation with the adhesive tape on the back, just peel and stick, no drilling or welding required..
  • 【Brilliant Compatibility】Carbon Fiber Headlight Eyebrow Cover Specially fit for Infiniti Q50 2014‑2019, can gives your car a sporty....
Check Stock

3x300x400mm Plain Matte Carbon Fiber Sheet Plate Panel for R/C Helicopter

  • Package include: 1pcs x carbon fiber sheet. Dimension: 300 x 400 x 3.0mm..
  • Made of pure carbon fiber material, without any fillers/composite layers. 3k plain matte finish, clear texture..
  • Carbon fiber plate has high strength and lightweight, good corrosion resistance, it has a long service life..
  • Perfect for many application: CNC engraving, cutting, milling, DIY crafts,aircraft,RC and so on..
  • Fully support Amazon's sales and return policy, and if you have any questions about our carbon fiber products,please contact us..
Check Stock

Real 100% Black Carbon Fiber Motorcycle License Plate Frame with Matching Screw Caps - 1 Frame

  • 100% Real Black Motorcycle Carbon Fiber License Plate Frame With Matching Screw Caps.
  • Frame will withstand Car Washes and Weather Conditions.
  • Fits USA and CANADA Standard Sizs 4.725" x 7".
  • Glossy Finish With UV Protection Clear Coat to Protect Frame.
  • SATISFACTION GUARANTEE: We take pride in delivering top quality products and are proud to offer our friendly 90 days money back guarantee in case you are not 100% satisfied and wish to return the product for ANY reason.Ordering now has never been easier.
Check Stock

iPick Image for - Honda Accord Black Real Carbon Fiber Leather RFID Blocking Bi-fold Wallet

  • Fashion, Slim, Real carbon fiber, RFID blocking, and luxury this real carbon fiber wallet has all..
  • Made of coated real carbon fiber outside with PU leather inside. Black stitched edge. Full-color, high-resolution, scratch resistant graphics with OEM style car logo..
  • The wallet has a total of 4 card slots, 1 clear cover ID slot and 2 currency slots with divider. The wallet has total 4 card slots, 1 clear cover ID slot and 2 currency slots with divider..
  • High-quality finish, wear resistance, dust-proof, Nice gift for someone you love..
  • Brand new official licensed product. All rights reserved..
Check Stock

Real 100% Carbon Fiber License Plate Frame Tag Cover FF - D with Matching Screw Caps - 1 Frame

  • 100% Real Black Carbon Fiber License Plate Frame With Matching Screw Caps.
  • Frame will withstand Car Washes and Weather Conditions.
  • Fits USA and CANADA Standard Sizs 6.25" x 12.25".
  • Glossy Finish With UV Protection Clear Coat to Protect Frame.
  • SATISFACTION GUARANTEE: We take pride in delivering top quality products and are proud to offer our friendly 90 days money back guarantee in case you....
Check Stock

Carbon Fiber Sheet 150x125x1.5mm Twill Matte Finish,1.0~3.0mm 400x250mm Avaiable

  • Package include: 1pcs x carbon fiber sheet. Dimension: 150x 125 x 1.5mm..
  • Made of pure carbon fiber material, without any fillers/composite layers. 3k twill matte finish, clear texture..
  • Carbon fiber plate has high strength and lightweight, good corrosion resistance, it has a long service life..
  • Perfect for many application: CNC engraving, cutting, milling, DIY crafts,aircraft,RC and so on..
  • Fully support Amazon's sales and return policy, and if you have any questions about our carbon fiber products,please contact us..
Check Stock