Top Cobalt Plate

OXMUL Step Drill Bits for Metal, 1/8 to 1/2, Cobalt Bit, Heavy Duty for Stainless Steel,Metal, Aluminum, Wood, Copper, Wood, 13-Steps. #202

• 【Heavy Duty for Stainless Steel】 The Cobalt Drill Bits(1.3243 STEEL) can drill 6X longer life and 2X faster. This Drill bits is heavy duty for Stainless Steel, Metal, Galvanized Steel, Aluminum,Iron, Wood, PVC and Copper. If you want to drill faster and many holes on metal, please choose this step drill bit.
• 【Cobalt Bits】 Prefect for Stainless Steel/Metal Sheet/Wood/Plastic/Aluminum Sheet/Copper and other metal sheets. This Drill bit can successfully drill more and more holes easily into Stainless Steel plate like knife through butter!.
• 【120-DAYS WARRANTY】 - If not satisfied, Any Reason, please contact us for 100% refund or replacement.
• 【13 Steps︱2-Spiral-Flute︱1/4" Shank】 13-STEPS: 1/8,5/32,3/16,7/32,1/4,9/32,5/16,11/32,3/8,13/32,7/16,15/32 to 1/2 inches. 2-Spiral Flute:Clears Chips faster.
• 【Cutting Fluid】 Cutting Fluid must be poured during work for longer life! Prohibit water-cooling to prevent!.

Cobalt Rounds (1 Pound | 99.9+% Pure) Raw Cobalt Metal by MS MetalShipper

• ✔️ Cobalt Rounds (1 Pound | 99.9+% Pure) Our Cobalt Rounds are all sourced directly from the Vale Mining Group in Canada where they are produced and are 100% “virgin” metal (not recycled). We sell this metal by the pound, so if you need 10lbs, simply add a quantity of 10 to your cart. Be sure to see our promotional discounts for certain quantity levels if you would like to save money per pound..
• ✔️ USAGE - This is very high purity cobalt that can be confidently used in any application where cobalt is required. This item is one of our best sellers because of its versatility and ease of use..
• ✔️ SIZE - Our 1lb of cobalt rounds - each cobalt round is approximately 1.25 inches in diameter and .25 inches thick..
• ✔️ SPECIFICATIONS - Atomic Number = 27 | Melting Point (F) = 2723 | Atomic Mass= 58.93 | Boiling Point (F) = 5275 | Density (g/cm3) = 8.9 | Analysis: COBALT 99.9974%, NICKEL 0.0950%, OXYGEN 0.0050%, CARBON 0.0025%..
• ✔️ PACKAGING - This 1lb of cobalt rounds will arrive sealed inside of heavy duty BPA free plastic to prevent any corrosion or oxidation..

Drill Hog 37 Pc Cobalt Drill Bit Set Index M42 1/16" - 1"

Blue License Plate Frames- Aluminum Front & Rear Car Tag Covers for Men Women, 2 Pack 4 Hole Thin Slim Holders with Mounting Hardware Kit- Stainless Steel Screws, Rattle Proof Pads, Tire Valve Caps

• METAL BLUE LICENSE PLATE HOLDERS: The color is biased towards Cobalt blue, Rally blue, navy blue, Not light blue, Not sky-blue. The surface adopts alloy spray technology, blue powder coating Will not fade. The same color blue license plate screw cap can keep your car tag frame always clean, tidy and cool. Note * For personal display bright, contrasting show differences, the picture with the real may have subtle color differences.
• UNIVERSAL SLIM CAR PLATE FRAME: The blue holder uses an aluminum base frame, 1.3mm thick, heavy duty and durable, and will not rust or corrode. Designed for all American 12*6 inch standard license plates, 4 thin edges will not Cover the registration label on the car tag, ensure legal street in all states..
• EASY TO INSTALL: 2 pack license plate frames are suitable for front and back license plate mounting. The kit includes license plate fasteners- stainless steel license plate screws and caps. M6*20mm (1/4X3/4 inch) license plate bolts are suitable for the mount of the license plate frame cover of most models. 4 holes frame is suitable for your car, truck and all types of trailers.
• HIGH-VALUE CAR ACCESSORIES: The black foam license plate pad can be pasted on the back of the metal license plate to avoid direct contact with the ca....

Twist Drill Bits, 10pcs M35 HSS-CO Cobalt Drill Bit Set 1mm-5mm, for Drilling on Stainless Steel, Cast iron, Sheet Metal, Steel Plate, Angle Iron(1.5mm)

• It is widely used in the drilling of stainless steel plate, automobile spring steel and die steel.
• Ideal for drilling on stainless steel, cast iron, sheet metal, steel plate, Angle iron.
• With high surface finish, high grinding precision , the blade is sharp and durable in use.
• Made of M35 material, includes 5% cobalt, high hardness, stable performance.
• 135-degree split-point tip starts drilling immediately with less force and eliminates.

Drill America - DWDCOFP12 F Cobalt Drill Bit (Pack of 12), DWDCO Series

• 13 pc Set High Speed Steel M42 Cobalt NAS 907J 135-Degree Split Point.
• 135-Degree split point for accurate centering and fast penetration.
• Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance.

uxcell Spiral Flute Tap M6 Thread H2 Tolerance M35 Cobalt Titanium Plating HSS

• Spiral flutes for better chip clearing process. Self-centering point, do not need assistant center drilling or center punching..
• Complete hole drilling, tapping, deburring and countersink in one operation with power drill, saves labor and time. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron etc..

Hex Shank Cobalt Metric Drill Bit Set 15 PCS (1.5mm-8mm), Quick Change High Speed Steel Impact Driver Hex Drill bits for Metal, Steel, Wood, Plastic, Aluminum Alloy

• 【Specification】13 cobalt hexagonal shank bits, including 1.5, 2.0, 2.5, 3.0, 3.2, 3.5, 4.0, 4.5, 4.8, 5.0, 5.5, 6.0, 6.5 mm, with 1/4 hexagonal shank..
• 【Advantages】The hexagonal handle specially made for quick replacement of drill bits is an upgraded version. Compared with the ordinary hexagonal handle, it shows excellent performance, prevents the drill bit from peeling off the hexagonal handle, and effectively keeps the hexagonal handle locked during impact drilling. Cobalt drill bit is more durable than titanium drill bit..
• 【Complete grinding process and 135 ° points】 The fully ground spiral groove blowdown waste quickly reduces friction and heat, thus providing faster, cooler and more efficient drilling performance.
• 135 ° split point with straight handle can prevent slipping and make drilling stable and accurate. No center punch is required..
• 【Quick replacement】 1/4-inch (about 0.6cm) hexagonal handle base is suitable for most pistol drilling and drilling presses, which is easier and safer to install without slipping and falling off..

Freud LU79R006M20 160mm x 48T Thin Kerf Ultimate Plywood & Melamine Blade

• Freud's TiCo carbide blade is designed using titanium carbide, cobalt and tungsten.
• High alternative top bevel tooth design produces smooth, splinter-free cuts.
• Laser-cut anti-vibration slots reduce vibration and sideways movement, resulting in a smooth finish and extended blade life.
• Perma-shield nonstick coating reduces drag, corrosion and pitch build-up.

Ernie Ball Regular Slinky Cobalt Electric Guitar Strings 3-pack 10-46 Gauge P03721

• 3 individual sets of Regular Slinky Cobalt electric guitar strings.
• Cobalt produces a stronger magnetic relationship between pickups and strings, resulting in increased output.
• Cobalt electric guitar strings provide an extended dynamic range, incredible harmonic response, strong low end, and crisp, clear highs.
• Wound strings consist of Ernie Ball’s Cobalt alloy wrapped around a tin-plated high-carbon steel core wire.
• Made in California, USA with the finest and freshest materials.

Viking Drill and Tool by Norseman 69280 Type 240-D 135 Degree Split Point Cobalt Jobber Gold Finish Drill Set (115 Piece)

• 115 pc Set High Speed Steel M42 Cobalt NAS 907J 135-Degree Split Point.
• 135-Degree split point for accurate centering and fast penetration.
• Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance.

Drill Hulk 13-Piece M35 Cobalt Drill Bit Set for Hard Metal, Stainless Steel, 1/16-Inch to 1/4-Inch, Jobber Length, 3-Flat Shank

• JOBBER LENGTH: jobber length cobalt drill bit, 135 degree split point reduces drill walking, 3-flat shank provides a secrue grip in chucks.
• MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
• CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
• APPLICATION: best used for drilling in hard metal, including stainless steel.
• INCLUDE: 13 pieces cobalt drill bits in inch sizes 1/16" to 1/4" (1/64" increments) with plastic case.