Top Communication Power Supply

Chengliang Power Supplys 24v 15a Dc 360w Original Ender 3 3D Printer Switching PSU

  • 24v creality ender 3 3d printer original power supply 24 volt adapter Universal Regulated output 24v 15a 360w.
  • Input voltage ac 115/230v by switch range 100-130/200-264 vac convert ac 115/230v to dc 24v 15a 360w.
  • Efficiency over 86% for 3d printer CCTV monitor led light strip industrial automation communication.
  • Smart full protections SCP OVP UVP OPP OCP OTP auto on/off cooling fan power on auto works Noise≤35dB.
  • You get one original ender 3 printer power supply CL-P360W24V-D warranty 3 years 24hrs online service.
  • Withstand 300V AC surge input for 7 seconds.
Check Stock

YJYGR TriGorilla Main Board Motherboard + 5X V2.0 TMC2209 Driver with Mega2560 & RAMPS1.4 Function for 3D Printer Driver Board

  • Smooth transmission, bumpers, damping capacity, low noise level..
  • Simple to install: Integrated with the mighty function of the Mega2560+ramps 1.4 kit, Great reduce the wiring problem, more convenient connection, and more stable..
  • Convenient to use: TriGorilla motherboard support LCD2004 and LCD12864 without using adapter, and there are two choices for main board power supply,you can choose DC power supply connection or directly from the terminal, it is convenient to use..
  • TriGorilla use CP2102 chip as a serial port communication, communication not only stable,but also avoid the repeated to install the driver(There will be increased “COM” port when replacing the traditional 2560 board,so while those people who need to batch purchasing test, the “COM” increases to a certain value will lead to can’t upload the firmware problem.).
  • We are a professional Amazon store. If you have any questions, you can contact us at any time. We sincerely create a good buying experience for every customer who comes to each store..
Check Stock

AITRIP 3pcs MPU9250 BMP280 GY-91 10DOF Acceleration Gyroscope Compass Nine Shaft Sensor for Arduino 3-5V

  • Built-in 16bit AD converter chip, 16bit data output.
  • Power supply: 3-5v (low dropout internal regulator).
  • Communication: IIC / SPI standard communication protocol.
  • MPU9250 + BMP280 module (Three-axis gyroscope + triaxial accelerometer + triaxial magnetic field + pressure).
Check Stock

SCM / 24/93 Series EEPROM Memory Chips USB PIC Programmer SP200SE/SP200S Enhanced Version

  • Support WIN98, WINME, WIN2000, WINXP, VISTA, WIN7 and other 32-bit and 64-bit operating systems.
  • Support hundreds of types of single-chip microcomputer and EEPROM burn of Atmel, Microchip, SST, ST, WINBOND, STC, MSP430 and other brands.
  • USB port power supply, front-line data power supply, convenient for laptop users.
  • ISP interface USES the standard IDC10PIN interface recommended by Atmel company.
Check Stock

YJYGR TriGorilla Main Board Motherboard + 5X V2.0 TMC2209 Driver with Mega2560 & RAMPS1.4 Function for 3D Printer Driver Modules Driver Board

  • Simple to install: Integrated with the mighty function of the Mega2560+ramps 1.4 kit, Great reduce the wiring problem, more convenient connection, and more stable..
  • Convenient to use: TriGorilla motherboard support LCD2004 and LCD12864 without using adapter, and there are two choices for main board power supply,you can choose DC power supply connection or directly from the terminal, it is convenient to use..
  • TriGorilla use CP2102 chip as a serial port communication, communication not only stable,but also avoid the repeated to install the driver(There will be increased “COM” port when replacing the traditional 2560 board,so while those people who need to batch purchasing test, the “COM” increases to a certain value will lead to can’t upload the firmware problem.).
  • Excellent compatibility: Firmware can use the same configuration as ramps1.4, the marlin firmware which runs in Mega2560+ramps 1.4 kits can directly running in TriGorilla board..
  • We are a professional Amazon store. If you have any questions, you can contact us at any time. We sincerely create a good buying experience for every customer who comes to each store..
Check Stock

FRSHALOUIS USB Hart Modem USB to Hart Protocol Modem Hart Transmitter HART Convertor,Suitable for All Devices Which Support Hart Protocol

  • Fully HART compliant for communication with any HART instrument and error-free slave testing. DC-DC isolation power draws from USB port and needs no external power supply..
  • Three modes: 1) 24VDC/270Omega. 2) Normal. 3) 270Omega. The mode is easily slide-switch selected so yoursquoll always have a power supply or loop resistor with you..
  • Easy installation and use, this modem can power all 2-wire HART devices-independent of supplier..
  • Rugged aluminium alloy case gives you industrial-grade reliability in a small package..
  • Free HART application software for you to configure your HART device.Smart Design, smaller than a normal name card.operating system: 98/2000 / XP / 7/8/10.
Check Stock

The NES Encyclopedia Every Game Released for the Nintendo Entertainment System

  • MSR605X Card Reader Writer with USB interface..
  • All 3 tracks (Track 1, 2, 3). ISO format..
  • Provide software for Windows and Mac computers..
  • Communication and power supply by USB cable. Don't require an exteral power adapter..
  • Come with 20 blank cards and one cleaning card..
Check Stock

HiLetgo MPU9250 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor 9-Axis Attitude +Gyro+Accelerator+Magnetometer Sensor Module IIC/SPI for Arduino GY-9250

  • Power supply: 3-5V (internal low dropout regulator).
  • Communication: standard IIC communication protocol.
  • Built-in 16bit AD converter, 16-bit data output.
  • Using Immersion Gold PCB, machine welding process to ensure quality.
Check Stock

NOYAFA nf-826 Underground Cable Tester Locator Wire Tracker Detector,Detection of Wall and Underground Cables, Electrical Lines, Water and Gas Supply Pipeline Path

  • 【Underground wire locator】 detects breaks and shorts in underground cables and wires buried in walls or deep inside, built-in flashlight function, works in dark environments, adjustable sensitivity.
  • 【buried detector】 detect fuses and circuits that distribute current, track outlets and junction boxes covered with plaster.
  • 【wire break locator】 detector built-in AC/DC voltmeter function, can linearly measure AC/DC voltage from 12 to 400V.
  • 【Underground cable locator】 detects interruptions and shorts in floor heating, both transmitter and receiver display power level, code, battery, type and value of voltage detected, and high voltage alarm.
  • 【noyafa NF-826】 is widely used in communication cable construction, power cable construction, building pipeline construction, communication cable, power supply line and electric heating line maintenance, and is an indispensable tool for maintenance personnel and families.
Check Stock

Yahboom 4 Port USB 3.0 Hub for Raspberry Pi Jetson Nano ROS Robot, Compatible with USB 3.0/2.0/1.1 Driver-Free Plug&Play, Onboard External USB-A，5V (Micro-USB)，9~24V Power Port, for High-Power Device

  • ....0 HUB expansion board aims to solve the problems of insufficient USB interface on the main board and insufficient power supply caused by the increase of USB peripherals.Equipped with VL817 main control chip scheme, the main control board performance is stable and the transmission is stable and safe. It uses USB3.0 communication interface and HUB chip expand 4 USB interfaces to ensure high-speed data transmission of the interface..
  • 1 to 4 data extension -- The expansion efficiency of the four ports is doubled and Each USB device has an independent indicator light. Built in over current protection, short circuit protection and power reverse connection protection circuit to ensure the safe use of USB devices..
  • Support wide voltage external power supply -- In addition to the USB-A standard data interface power supply, this product also supports 5V (micro-USB), 9~24V (DC interface/XH2.54 socket) wide-voltage external power supply. Even if multiple high-power peripherals are connected at the same time, the stability of power supply and signal transmission can be guaranteed..
  • Support equipment -- Support ROS robot / car, Raspberry Pi / Jetson series board, PC, other boards, industrial computer, etc. Compatible with win7 / 8 / 10, Linux, Ubuntu, MacOS systems,....
Check Stock

EC Buying GY-SGP30 Gas Sensor, Air Quality Carbon Dioxide Formaldehyde Monitoring TVOC CO2 Gas Sensor Module, a Digital Multi-Pixel Gas Sensor for Indoor Air Quality Monitoring,co2 Sensor Arduino I2C

  • ♥GY-SGP30 gas sensor is a multi-pixel gas sensor for indoor air quality applications with excellent long-term stability, I2C interface with TVOC and CO2eq output signals, very small 6-pin DFN package: 2.45 x 2.45 x 0.9 mm3, Low Power: 48 mA at 1.8V, Reflow Solderable.
  • ♥ Product parameter range：① Power supply voltage VDD: ‑0.3V to +2.16V ②Power supply voltage VDDH:‑0.3V to +2.16V ③Storage temperature range: ‑40 to +125°C ④ Operating temperature range: ‑40 to +85°C ⑤ Humidity range: 10%‑95% (non-condensing).
  • ♥ Product features:1. Supply voltage 3.3V or 5V.
  • 2.IIC communication interface, 3. Imported highly sensitive SGP30 formaldehyde sensor, chip power supply voltage is 1.8V.
  • 6. The onboard 1.8V LDO chip supplies power to SGP30, so the input power can be 3.3V or 5V 7. Product pins: VCC (3.3-5V), GND, SCL, SDA (4 pins in total).
  • ♥ Product use: SGP30 module can be used in air quality detectors, formaldehyde detectors, portable gas detectors, various DIY designs, etc..
  • ♥ packing list: 1X GY-SGP30 Gas Sensor1x4 pin header.
Check Stock

Zhushan AMP Power Connector Crimper,Ratcheting Wire Crimper Manual Tool for AMP 15/30/45 Powerpole Connectors

  • 【Crimping range】Crimping pliers all three sizes of contacts: 15,30 and 45 amp.
  • 【High Quality Material】The crimp pliers is made of high carbon steel with PVC handle.It works for 15,30 and 45 AMP connectors.
  • 【Improve Accuracy】The ratcheting crimping tool is contact positioner with built-in holding contact,integral lock with self releasing,ensure the precision and correct crimping every time.
  • 【Reliable Performance】 It ensures the lowest electrical resistance,minimum current and maximum power.Simple and convenient to use.Durable material that can work long time.
  • 【Application Widely】Apply to power supply charging system.Widely used in communication power supply,sound equipment,two-way radios, washing machine,vacuum cleaners,automotive,electric vehicles,golf cart,sightseeing car and other electric appliance etc.If you have any dissatisfaction with the product, you can contact customer service to ensure your shopping experience.
Check Stock