Top Conduit Ground Clamp

Westinghouse Lighting 0107000 Saf-T-Grid for Suspended Ceilings

  • Saf-T-Box allows safe, simple installation of fans and fixtures, ideal for new construction and where attic is accessible.
  • Supports ceiling fans up to 70 pounds or lighting fixtures up to 150 pounds.
  • Includes three knockouts for Conduit or Romex, one Romex clamp.
  • 21.5-cubic-inch wiring capacity, electrical box is 2-1/8 inches deep.
  • Includes Saf-T-Cap, mounting hardware and instructions.
Check Stock

WYNNsky Magnetic Welding Support Ground Clamp, 2pcs Set, Single and Double Welding Head, Copper Tail

  • Design: This magnetic clamp attaches easily to any smooth metal surface, flat or curved. It holds on tightly, without budging easily. Super suction magnet at the bottom, large suction power, long-lasting magnetism..
  • Application: This device serves as the ground point, which you can take with you anywhere. Simply tack this onto a convenient spot, hook up your safety wire and you're ready to weld..
  • Material: The welding magnet head adopts high quality material, durable and solid. Has brass tail has good welding stability, durable, anti-rust, has good performance and long service life..
  • Advantage: This magnetic clamp is handy to have in such situations. You can stick in on a car body and not have to damage the paint. The clamp can also be attached to metal poles, struts, railings or the welding table..
  • Including 1pc Single Head Magnetic Welding Ground Clamp.
  • 1pc Double Head Magnetic Welding Ground Clamp.
  • 1pc Copper Tail Welding Stability Clamps..
Check Stock

Westinghouse Lighting 0124000 Sidemount Plus Fan Box 2-1/8 Inch Deep

  • Sidemount Plus Fan Box allows safe, simple installation of fans and fixtures, ideal for remodel applications.
  • Supports ceiling fans and lighting fixtures up to 70 pounds.
  • Includes three 1/2-inch Romex or conduit knockouts, two sets of Romex knockouts, one Romex clamp.
  • 21.5-cubic-inch wiring capacity, electrical box is 2-1/8 inches deep.
  • Includes sidemount bracket, electrical box, Saf-T-Cap, mounting hardware and instructions.
Check Stock

Rubber Cushion Strut Clamp 1" NOM (1-1/8" OD) for Mounting Copper Piping, PEX Pipe, CVPC Tubing to Strut Channels [5 Pack]

  • [QUALITY] Zinc plated to prevent corrosion, the heavy duty steel strut clamp brackets with attached bolt and nut clamp securely over a hard rubber cushion to nearly surround the sides of a pipe or tube..
  • [PROTECTIVE RUBBER CUSHION] The hard rubber cushion protects pipe and tube by absorbing shock caused by vibration and temperature changes, reduces unwanted noise, insulates pipe and tubing from metal surfaces, and prevents galvanic corrosion..
  • [APPLICATION] Insert pipe or tube into rubber cushion inside steel strut brackets. Mount strut clamp legs to 1" NOM (1-1/8" OD) strut channels. Attach nut to bolt and tighten..
  • [CONTENTS] Each of the 5 clamps contain two heavy duty zinc plated steel half brackets with attached bolt, a nut, and protective rubber cushion..
  • [VERSATILE] Use for 1" NOM (1-1/8" OD) copper pipe, PEX pipe, CPVC tube, and other conduit tube, hose, and wire applications. Can be hung vertically and horizontally on walls and ceilings. Compatible with unistruts in 1-5/8", 7/8", 13/16" heights..
Check Stock

Clamp for PVC Pipe Greenhouses, Row Covers, Shelters, Bird Protection, 2.4 Inches Long (White,for 1/2 Inch PVC Pipe)

  • What you can get: you will receive 32 pieces clamps.
  • Appropriate size: the size of this clamp is approx. 2.4 inch in length.
  • Suitable pipe outer diameter is 1-1/2 inch.
  • Hold material on tubular frame: this clamp is made of PVC material, with nice strength and good toughness, safe and reliable, easy to remove from the greenhouse film, will not break easily.
  • Wide application: can hold many kinds of sheet materials, and suitable for various type of pipes, proper for creating cold frames, greenhouse, shelters, row covers and so on.
  • Practical tools: these clamps are compatible with many types of clamps, including PVC or metal conduit.
  • Some applications include greenhouses, row covers, shelters, bird protection, dog beds, quilting frames and more.
Check Stock

Clamp for PVC Pipe Greenhouses, Row Covers, Shelters, Bird Protection, 2.4 Inches Long (White,for 1-1/2 Inch PVC Pipe)

  • What you can get: you will receive 32 pieces clamps.
  • Appropriate size: the size of this clamp is approx. 2.4 inch in length.
  • Suitable pipe outer diameter is 1-1/2 inch.
  • Hold material on tubular frame: this clamp is made of PVC material, with nice strength and good toughness, safe and reliable, easy to remove from the greenhouse film, will not break easily.
  • Wide application: can hold many kinds of sheet materials, and suitable for various type of pipes, proper for creating cold frames, greenhouse, shelters, row covers and so on.
  • Practical tools: these clamps are compatible with many types of clamps, including PVC or metal conduit.
  • Some applications include greenhouses, row covers, shelters, bird protection, dog beds, quilting frames and more.
Check Stock

200A Magnetic Welding Ground Clamp, 200A On/off Adjustable Magnetic Welding Ground Clamp Rare Earth Switchable Magnet Welding Holder,Grounding Magnet Connector

  • Magnetic Welding Ground Clamp: Made of high quality iron, durable in use. High strength and hardness. Fast set up and grounds instantly. Applicable to clamp both flat and round workpieces..
  • 200A Magnetic Ground Clamp: Magnet Strength Pull Force 30 kg, Simple to connect, ground wire of welding machine. Simply place on clean surface and turn on then start welding. Stays clean because magnetic field turns completely off..
  • Easy to Use: Strong grip on flat or round iron surfaces. The on/off control makes the metal dust fall off without cleaning, which is convenient and simple to use..
  • Package Included:1 x Welding Ground Clamp.
  • Warm Tips: Make sure that the grounding device is in the off state when it is not in contactwith the ferromagnetic material. It can be freely controlled to open and close. When the ferromagnetic material is opened and connected, it will produce sudden and powerful suction. Do not use welding grounding to lift or transport materials..
Check Stock

BAYTORY Upgrade Magnetic Welding Support Ground Clamp Tools, Welding Magnet Head Strong Magnetism Large Suction, Copper Tail Welding Accessories Stability Clamps

  • Check out this handy Fix-tite Magnetic Welding Ground Clamp. A device that speeds up grounding chores for welders..
  • NO-HASSLE SAFETY SETUP - You no longer have to waste your time finding, placing or removing a ground point for a welding job. This device serves as the ground point, which you can take with you anywhere. Simply tack this onto a convenient spot, hook up your safety wire and you're ready to weld..
  • STRONG MAGNETIC GRIP - This magnetic clamp attaches easily to any smooth metal surface, flat or curved. It holds on tightly, without budging easily. Now that you've got this, you won't have to take minutes searching for a good ground or attaching grounding tabs..
  • OFFERS CONVENIENCE - Sometimes you're faced with a welding job that has limited options for ground points. You don't want to have to damage a car's paint job simply to affix a safety line. This magnetic clamp is handy to have in such situations. You can stick in on a car body and not have to damage the paint. The clamp can also be attached to metal poles, struts, railings or the welding table..
  • Material: Copper / insulation board. Durable and solid.With copper tail with good welding stability..
Check Stock

Apex UPUT-RACK-V2 Universal Steel Over-Cab Truck Rack

  • Add additional storage space above the bed and cab for ladders, conduit, wood, and more.
  • Over cab design prevents damage to cab from cargo with 5" guard rails for added security.
  • Quick and easy no-drill clamp-on installation with a removable rear bar for taller cargo.
  • Durable, powder-coated steel with an 800 lb. weight capacity.
  • Adjustable width fits most pickup truck beds from 49" to 64" wide.
Check Stock

hynade Brass T-Style Welding Ground Clamp 300-Amp Wide Jaw Clamp Tool

  • Ground clamp size :7 inches long, 1.18 inches max chin opening.
  • The welding ground clamp adopt high-quality brass material, sturdy structure, strong grip, multifunctional wide-jaw grounding clamp.
  • The clamp tool suitable for most grounding situations, specially designed for heavy-duty high-current welding applications/MIG/MMA/TIG/plasma welding/cutting machines.
  • Large contact surface area provides good cable connection and positive grounding.
  • If have any questions, please contact us and we will provide you with 100% satisfactory service.
Check Stock

16 Pieces White Clamp for PVC Pipe Greenhouses, Row Covers, Shelters, Bird Protection, 2.4 Inches Long (for 1 Inch PVC Pipe)

  • What you can get: you will receive 16 pieces white grip clamps.
  • Appropriate size: the size of this grip clamp is approx. 2.4 inch in length, 1 inch in inner diameter.
  • Hold material on tubular frame: this white grip clamp is made of PVC material, with nice strength and good toughness, safe and reliable, easy to remove from the greenhouse film, will not break easily.
  • Wide application: can hold many kinds of sheet materials, and suitable for various type of pipes, proper for creating cold frames, greenhouse, shelters, row covers, etc.
  • Practical tools: these grip clamps are compatible with many types of pipes, including PVC or metal conduit.
  • Some applications include greenhouses, row covers, shelters, bird protection, dog beds, quilting frames and more.
Check Stock

Bench Vise Dual-Purpose Combined Bench Clamp, Heavy Duty Table Vise with Swivel Base for Woodworking, Cutting Conduit, Drilling, Metalworking(3'')

  • 【Table vise data 】：Vise weight 3.5lb, the maximum of jaw 3inch, Jaw width: 3inch, the maximum of clamp workbench 3.7inch..
  • 【Dual-Purpose Combined Vise】：Flexible use, 2 in 1, you can quickly clamp the table or use screws to fix it on the workbench, which can easily handle various scenes..
  • 【High Quality】Adopted premium cast steel material,jaw has highly toughness ,Electroplated screw are not easy to rust，Equipped with jaw rubber pad to avoid damaging items..
  • 【Wide range of use】Suitable for all kinds of scenes such as model making, jewelry, small parts, woodworking, cutting conduit, drilling, gluing, metalworking, sanding or planing, sawing，etc..
  • 【The best service】you can buy products with peace of mind, if you are not satisfied with the products, you can contact us at any time, we will give you a satisfactory solution..
Check Stock