Top Connection Fittings

Straight Push Connectors, 4/6/8/10/12 mm Quick Release Plastic Push to Connect Fittings Kit, 60 Pcs Air Line Fittings for 5/32 1/4 5/16 3/8 1/2 Tube

  • What You Get - 60 pieces fittings,12pcs for 1/4" fittings, 12pcs for 5/16" fittings, 12pcs for 3/8" fittings, 12pcs for 1/2" fittings,12pcs for 5/32" fittings, meeting your different needs..
  • Safe And Reliable Material - Made of high quality PU and plastic. High pressure resistant, can withstand strong pressure without tripping. Perfect for long term use. Push-in connector type: 5/32'', 1/4'', 5/16'', 3/8'', 1/2'', 5/32 for 4mm 6mm 8mm 10mm 12mm OD pipe..
  • Easy To Use - Simple push-in design attaches to the tube and provides a strong connection without additional sealing..
  • Suitable Design - Quick connect fittings are easy to install, flexible and space saving, can be rotated 360 degrees, and the release ring has a round design and can be easily removed..
  • Application Scope - Widely used in machinery, electronics, automotive, packaging and other industries of automated production equipment..
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK

  • ...ter-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

REGNHLIF 2 Pack 3/4 Inch Male to 1/2 Inch NPT Male Connector, Brass Garden Hose Fitting, Male Hose Adapter

  • Connects to a female 3/4″GHT threaded connection on one end and a female 1/2″NPTF connection on the other.
  • 1/2″ to 3/4″ hose adapter, Adapter for connecting hose or fittings of different types.
  • Package Include: 2 Pack 3/4 inch GHT Male x 1/2 inch NPT Male Connector.
  • Made with precision process, no leaking and durable, easy to connect and disconnect.
  • Brass Pipe Fittings for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Check Stock

24 PACK 3 Way PVC Elbow Fittings 3/4 Inch White, 3 way PVC Pipe Connectors, Pipe Fittings, Corner Fitting, for Building PVC Furniture Greenhouse Shed Pipe Fittings Tent Connection

  • PVC MATERIAL - 3 Way PVC Elbow Fittings are made of high quality PVC material. With the feature of Low-Temperature-Resistant, Impact-Resistance, Ultraviolet-Resistance, Rust-Resistance.
  • IDEAL FOR CONNECTION- 3-way pipe fittings are ideal for center connections! Structural grade pvc has tapered edges and a beautiful glossy surface.
  • EAST TO INSTALL- The 3/4” pipe can be rotated and twisted into the 3 way pipe fitting during installation.
  • The deep sleeve allows the pipe to be inserted further into the joint in order to have a safer and more secure hold.
  • WIDE APPLICATION- Perfect for building greenhouse shed pipe fittings, tent connection, dog bed, hoop houses and so on.
  • GUARANTEE- Lifetime warranty for 100% money back or replacement, if you have any questions, please feel free to contact us.
Check Stock

30Pieces Pneumatic Elbow Straight Combination 1/4 Inch Tube OD x 1/8 Inch NPT Push to Connect Tube Fittings Male Thread Straight Push Quick  Release Connectors Air Tool Connectors Connect Fittings

  • You will get: 15 pieces of 1/4 inch OD x 1/8 inch NPT pushed to connect air fittings, 15 pieces of straight tube connectors, there are a total of 30 pieces, different styles for you to choose, sufficient quantity can meet your daily needs.
  • Quality material: straight pneumatic fitting is made of quality plastic and copper, nice accessory, strong valve body, safe connection, not easy to leak, nice sealing performance, wear resistance, light weight, pressure resistance, you can use it for a long time.
  • Easy to use: quick tube connect fittings are easy to install and remove, one end is rod connection, the other end is external thread, quality cap can withstand increasing pressure without tripping, you can use them easily and save your time.
  • Wide range of application: you can use pneumatic hose fittings in various occasions, which are suitable for all kinds of PU/ PA/ PE/ PVC items, you can also use them in air, vacuum, convenient for you to use in daily life.
  • Warm tips: when you use the plastic push to connect fittings, you need to control the temperature properly, and work pressure should at 0-159 psi.
  • You can use them in different products and places.
Check Stock

275 330 G IBC Tote Fittings Tank Water Tank Connector 2 Inch Fitting Adapter IBC Tonnage Connection Joint and 3/4 Inch Coarse Thread(2)

  • ...h an inner diameter of 6 cm/ 2 inches and a thread pitch of 0.4 cm/ 0.15 inches.
  • It provides a foundation for garden hoses and can extend the service life of existing valves.
  • Note: Please check the size carefully before buying.
  • Not easy to leak: 275 330 G IBC tote bag drain connector provides a stable and leak-proof connection. The tote bag water tank connector has gasket seals to prevent leakage. You can use it with confidence (Note: Before use, please check if there is LDPE gasket to avoid Water leakage. If there is water leakage, you can use sealant tape to stabilize the leaking part).
  • Quality materials: 275 330 G IBC tote fittings tank is made of quality plastic materials, which can withstand irritating chemicals and acidic water more than brass, and this durable material can ensure long-term safe use and is suitable for drinking water.
  • Convenient installation: tote fittings tank is suitable for fast connection of various fluid soft and hard pipes, simple operation, you can operate on your own without any instructions, convenient and practical, which can save your time and manpower.
Check Stock

Jeeker Garden Hose Repair Kit, Zinc and Aluminum Male and Female Hose End, Suitable for 3/4 Inch and 5/8 Inch Garden Hoses (2Sets)(2Female+2Male)

  • 【PACKAGE】We offer you 2 couples of male & female hose repair kits, 2 Sealing tapes and 4 pieces rubber washers. The reusable water hose repair kit features premium constructions..
  • 【MATERIAL】The garden hose repair fittings are made of high-quality aluminum, the clamps are made of zinc, the screws are made of stainless steel..
  • 【SIZE】The quick connect garden hose fittings are designed basing on the inner diameter of the 16mm and 19mm hoses, so they match well with the devices which accept 5/8 inches connection or 3/4 inches connection..
  • 【CONVENIENCE】The water hose repair kit is equipped with thread design, so you can connect the male hose end repair and the female hose connector easily and quickly..
  • 【SATISFACTION】100% customer guarantee, just contact us if you are not 100% satisfied with your water hose connectors and fittings, then we will support 100% service for your satisfaction..
Check Stock

BLACKHORSE-RACING Rear Air A/C Block Off Kit Compatible with 2000-2013 Chevrolet Suburban Tahoe GMC Yukon

  • √ Easy to Install, Factory Direct Replacement Fittings.
  • √ Compatible with 2000 - 2013 Suburban, Yukon XL, Tahoe, Escalade Rear AC Block Off Fittings..
  • √ Eliminates the Rear A/C and Allows you to use just the Front System.
  • √ Simply disconnect the rear lines and install kit..
  • √ The fittings are installed at the connection location of the rear lines in the engine compartment..
Check Stock

3/4 Inch Tee Fitting Compression Tee Fittings for 3/4 Inch Tubing System (2 pcs)

  • ...x expansion fittings meet the standard of potable water grade. When the water flows through the poly pex fittings, it will not be polluted..
  • 【Fully Equipped】Qty: 1/2 inch pex expansion elbows 10pcs + 1/2 inch pex expansion Tees 10pcs + 1/2 inch pex expansion couplings 10pcs + 1/2 inch pex expansion rings 70pcs | Connection pipe type: Pex A pipe only | Max temperature: 200F | Max operating pressure: 160psi.
  • 【Professional Standards】Pex Expansion A Fittings are of high quality. All poly pex a fittings are manufactured according to ASTM F-1960, CSA B137.5 and qualified cUPC certification. Listed to NSF NSF/ANSI 61..
  • 【Easy to Install】Use expansion tools and expansion rings to connect the expansion fittings to the PEX A pipe. The protruding stop part on the expansion pex fitting makes it clear whether it has been installed in place. NOTE: Expansion tool is not included in the package..
  • 【Wide Usage】Plastic poly pex expansion fittings can be widely used in heating circulation system and domestic water. Due to its good corrosion resistance and heat resistance, it can have excellent performance even in a chemical environment..
Check Stock

POHIR Pressure Washer Adapter Set, 14-Pack Quick Connect Fittings, 3/8 Power Washer Quick Disconnect Kit with M22 Swivel to 3/8'' Quick Connect, 3/4\ to Quick Release and M22 15mm to 14mm Male

  • 14-Pack Quick Connect Kit - 4-pieces Metric M22-14 female to 3/8 quick plug, 2-pieces m22 14mm female to 3/8 quick disconnect, 2-pieces M22 14mm male to 3/8’’ quick disconnect, 2-pieces M22 14mm male thread to m22 14/15 male, 2-pieces 3/4 female to 1/2 quick connect, 2-pieces 1/2 plug to 3/4 male.
  • Easy Connect & Disconnect - M22 quick connect fittings help pressure washer hose quick connect to pressure washer pump or gun. The 3/4 quick coupler fits all 3/4" GHT (garden hose thread) watering equipment..
  • M22 Male to Male - 1x M22 15mm male to 14mm male and 1x M22 14mm to 14mm male adapter, convert the metric M22 14mm male thread to the M22 14mm or 15mm swirl as needed..
  • High-Quality Brass Quick Connect - Made of solid brass, stainless steel and engineering plastics, for a safe and leak free connection. These quick connect fittings are durable, rust proof, providing secure fittings and are convenient for frequent connection. .
  • Warm Tips: Inner diameter of M22 -14 swivel is 14MM NOT 15mm. Do NOT use the threaded 14MM to connect M22-15mm fittings, or it will cause leakage. Please lubricate the accessories before use..
Check Stock

Happybuy PEX Tubing Oxygen Barrier - 2 Rolls of 1/2 Inch X 300 Feet Tube Coil - EVOH PEX-B Pipe for Residential Commercial Radiant Floor Heating Pex Pipe (1/2\ O2-Barrier, 2x300Ft/Red+Blue)

  • ...obust O2 Resistant: Unique EVOH layer, stop O2 into the tube, protect metal components from corrosion. Heating system's service time can be greatly lengthened. Smooth inner pipe, anti- scaling quality, increase heat dissipation efficiency & speed for energy-saving..
  • Effortless Installation: Compatible with different connection system & floor type, such as: Crimp connection system (crimp tool + crimp rings + crimp fittings).
  • Cinch (clamp) connection system (cinch tool + St. steel clamps + crimp fittings).
  • Premium Flexibility: Min.5" bending radius, easy to bend for different ground situation. Big pressure capacity: 80psi @ 200℉, 100psi @ 180℉, 160psi @ 73℉. Thus to ensure its good temperature resistant, crack- & leakage-proof..
  • Diverse Use Scenario: Suit for home & commercial use, like: radiant floor heat system, solar water heater system, central air-conditioning piping system etc. Structural concrete slabs, Non-structural slabs, Staple-up (between joists) radiant floor heating with and without heat transfer plates, "Sandwich" type radiant heating (between sub floor and finished floor), Snow & ice melting systems etc..
Check Stock

Sunluway 6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool and High Pressure Oil Rail Adapters Leak Test Kit Fit for Ford 6.0L Powerstroke Diesel Engine

  • Fitment: Perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
  • High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these adapter fittings show their high tightness, corrosion resistance and durability.
  • Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
  • IPR Valve Air Test Fitting: This tool has 1/4 inch pipe threads to accept standard air fittings.
  • It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
  • 100% SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Fittings, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.
Check Stock