Top Coolant Fed End Mills

HHIP 3600-0056 End Mill Grinding Fixture (Angle) 5C

  • Solid negative ball stops with 15 degrees spacing fast & easy set-ups..
  • Can be used for grinding 2-3-4-6-8 and 12 flute end mills.
  • This fixture takes 5C round collets for grinding end mill 1/16" ~ 1-1/8" .Clearance & relief angels are built into the base.
  • Shell mills can easily be held with Straight Shank arbors.
  • Clearance & relief angels are built into the base.
Check Stock

Kauplus Radiator Coolant Filling Funnel Kit- Spill Proof Coolant Filling Plastic Funnel Kit with Adapter

  • Best Choice for Filling Automotive Cooling Systems. Fit on Most Domestic and Import Cars and Light Trucks, i.e. G.M, Nissan vehicles….
  • Smart Coolant Filling Funnel for drain refill of the coolant prevent Spills & Trapped Air as coolant filling application, the spill-free funnel eliminates trapped air pockets which usually cause erratic cooling system and heater performance.
  • No-Spill Filling Funnel Kit with 5 Caps (adapters) fits on most domestic and import carts, 2 pcs of 45 degree elbow allows use on radiator caps that are placed at an angle and 1 straight extension (5 inch) allow access to caps under shrouds.
  • The Spill Proof Coolant Filling Funnel Incorporates a Fluid Stopper with tube for trapped air.
  • Tight attach the plastic tube on fluid stopper end to bleeding trapped air pockets out while filling the coolant to prevent unsteady pressure with cooling system. These air pockets accumulate over time can cause overheating by impeding the flow of coolant through the system.
Check Stock

Niagara Cutter 17005489 Carbide Square Nose End Mill, Inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 4' Overall Length, 0.375' Cutting Diameter, 0.375' Shank Diameter

  • 4 flute design for creating finer finishes and a higher metal removal rate.
  • General purpose end mill for working on all types of materials.
  • Made of extra-fine grade carbide for ultra high transverse rupture strength.
  • Uncoated end mills feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.
Check Stock

Genmitsu 40pcs End Mills CNC Router Bits, 1/8\ Shank CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose End Mill, Nano Blue Coat & Titanium Coat CNC Bits, MC40A

  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm..
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating..
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized co....
Check Stock

Genmitsu 4pcs 2-Flute Tapered Ball Nose End Mills Tungsten Carbide Cutter with Nano Blue Coat R0.25-1.0 1/8” Shank TB04A

  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm..
  • Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best..
  • Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
  • Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure ....
Check Stock

JAINGU 1pc T Slot Milling Cutter 4-12mm Shank 4 Flute Carbide End Mills for Metalworking T Slot Keyseat Router Bits CNC Milling Cutter-1pc 6x2x3x9.5x50

  • Package Including:1pc 4 Flute T Type End Mills.
Check Stock

OSCARBIDE Indexable End Mill R8 Shank,1''Cutting Diameter,5-9/16\Overall Length,2 Flute with 2 Pieces TPCN1103PDTR(TPCN22PDTR) Carbide Inserts

  • Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
  • Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
  • When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
  • Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
  • Used for slotting and peripheral milling.
Check Stock

Niagara Cutter - SP205-0.500-D2-S.3-Z2 17011645 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 35 Degree Helix, 2 Flutes, 3' Overall Length, 0.500' Cutting Diameter, 0.500' Shank Diameter

  • 2 Flute design makes these ideal for plunge cutting when chip removal is not a problem.
  • General purpose end mill for working on all types of materials.
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Uncoated end mills feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling, pocket and slotting.
Check Stock

CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)

  • DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
  • Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
  • High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
  • Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
  • Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Micro 100 QBT-060200 Boring Tool - Chipbreaker - Quick Change.060\ Min Bore Dia.200\ Max Bore Depth.010\ Proj, .0338\ Offset.002\ Corner Rad, 3/16\ Shank Dia, 1-1/2\ OAL, Uncoated

  • Top rake geometry provides freer cutting.
Check Stock

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3\ Overall Length, 0.125\ Cutting Diameter, 0.125\ Shank Diameter

  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check Stock

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4\ Overall Length, 0.1875\ Cutting Diameter, 0.1875\ Shank Diameter

  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check Stock