Top Copper Tubing Flaring Tool

HORUSDY 7 Dies Flaring Tools Set For Sizes 3/16' -3/4' Refrigeration HVAC 45 degree Heavy Duty Eccentric Cone Type Kit for Water Gas Refrigeration Brake Line Applications,

  • The clever clutch mechanism automatically prevents over-tightening.
  • Off-set yoke reduces friction and force required, working together to produce perfect SAE 45° flares every time on copper, brass, aluminum and other soft steel tubing. Will also flare hard copper, steel, stainless steel and brass through a wall thickness of 0.035 inches。.
  • It creates a perfectly smooth flare. Will not crush the tubing. Hardened steel flaring cone, eccentrically mounted in needle bearings, produces rolling action for even metal flow, giving uniform flare walls without galling. Ideal for Water, Gas, Refrigeration, and Brake Line Applications.
  • A single clamp screw provides for easy clamping and removal of tubing, Large feed screw handle for smooth turning with little effort.
  • Pipe sizes for the Flaring Tool are 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4".
  • Silver flaring bars are heat-treated for durability and secure grip on tubing.
Check Stock

37 Degree Flaring Tool for Stainless Steel Line

  • This is the best 37 degree flaring tool for the money we have found.
  • Features a ratcheting feed screw that has a hardened flaring cone supported by needle bearings to provide the most accurate flare possible.
  • Works with tubing sizes of 3/16", 1/4", 3/8", 1/2", 5/8" and 3/4" outside diameter.
  • Compatible with steel, stainless steel, copper, brass and aluminum tubing with .035" wall thickness.
  • Creates profesional leak free flares with minimal effort.
Check Stock

Bonvoisin Flaring Tool 1/4”-3/4” HVAC Single Flare Tool 45° Eccentric Tube Flaring Tool with Clutch Limit Piece for Copper Aluminum Tubing (one piece)

  • [Eccentric Type Cone] - The eccentrically mounting hardened steel flaring cone produces a rolling action for even metal flow, giving uniform flare walls without wear. Applicable tube outer diameter: Φ1/4 ", 5/16", 3/8 ", 1/2", 5/8 ", 3/4".(NOTE: It will only do single flare - not double flare!).
  • [Limit Piece & Clutch] - (1)After inserting the copper tube, the length of the flared tube can be precisely limited by the limit piece, which is more efficient and convenient than measuring by eyes only. (2)There is a clutch in the rotating handle, which will automatically disconnect when the flaring operation is completed..
  • [Ultralight] - The tubing flaring tool is made of aluminum alloy and is very light. It's less than 1kg, so you can hold it and work for a long time without getting tired..
  • [Wide Application] - The tube flaring tool is applicable to soft metal tubes such as copper tubes / aluminum tubes. Widely used in electrical products, like HVAC, air conditioners, air heaters, refrigerators, etc..
  • [Packing List] - This flare tool includes the gantry * 1, inch-type flaring clamp * 1 (without a case)..
Check Stock

Titan 51535 3/16-Inch Double Flaring Tool

  • Set Contents: (1) 3/16-Inch Double Flaring Tool with Removable Handle, (1) Positioning Bolt, (1) Double Ended OP1/OP2 Punch, (1) Container of Die Lubricant.
  • Creates a perfect inverted 45-Degree SAE double flare with 3/16-inch steel and nickel-copper tubing. Not recommended for use on stainless steel tubing..
  • Can be used on the vehicle! Compact design can be used in tight under-car spaces allowing user to repair brake lines in place on the vehicle..
  • Handle can be removed if you prefer to use in a bench vise..
  • SAE Double Flare is an inverted 45-Degree flare typically used in automotive brake line applications. 3/16-Inch brake lines are on almost all cars and trucks making this flaring tool usable with most vehicles..
Check Stock

Amerbm Professional Brake Line Flaring Tool 45 Degree Set Single Double and Bubble Flares Tool Kit for Steel Copper Tube

  • 45-degree tool set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
  • For 3/16", 1/4", 5/16", 3/8" diameter lines..
  • This flaring tool is designed to be mounted in a vise, and the T-handle screw clamp securely keeps the die and tubing in place, so you can create flares quickly and easily..
  • The "turret-style" design allows you to make those precision flares in a minimal time, which saves you the hassle of groping for small parts or losing them..
  • When building car brake lines, the brake flaring tool kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises..
  • The flaring tool set is made of durable steel for reliable and long-lasting performance, high precision and safe to use. With a plastic case, compact and convenient to carry and store..
Check Stock

HVAC Flaring Tool Kit for 1/4 - 3/4 Copper Pipe Flare Tool 45°Eccentric Single Tubing Flaring Tool with Pipe Cutter & Deburring Tool for Copper Aluminum Pipes Refrigeration Air Conditioner Repair

  • The accuracy eccentric cone flaring tool produces 45 Degree flares in soft copper, brass, aluminum or stainless steel pipes. Widely used in HVAC, air conditioners, air heaters, refrigerators maintenance, etc..
  • Our HVAC Flaring Tool Kit comes with 2 types of flaring clamps applicable pipe O.D.Inch: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" Metric: 6mm, 9mm, 10mm 12mm, 16mm, 19mm)..
  • The eccentric flaring cone provides for easy clamping and removal of tubing, Large feed screw handle for smooth turning with little effort (NOTE: It will only do single flare - not double flare!).
  • The flare tool is designed with a clutch in the rotating handle, which will automatically disconnect when the flaring is completed..
  • Package includes 1x Flaring Tool, 2x Clamp(inch & metric type), 1x Deburring Tool, 1x Tube Cutter for O.D. 6-50mm tubes, 1x Manual Book, 1x Suitcase..
Check Stock

Wostore Eccentric Flaring Tool Kit Tubing Refrigeration 7 Dies 3/16-3/4 inch Copper

  • 【Practical Tool】Create 45 degree precise flares in soft copper, brass, aluminum and mild steel tubing.
  • 【Available Sizes】For flaring 7 dies size: 3/16,1/4, 5/16, 3/8, 1/2, 5/8 and 3/4 -inch sizes..
  • 【Convenient Operation】A single clamp screw provides for easy clamping and removal of tubing, large feed screw handle for smooth turning with little effort, easy to operate..
  • 【Uniform Flares】Features a durable eccentrically-mounted, hardened steel flaring cone for even metal flow.Produces a rolling action for uniform flare walls without galling in tubing..
  • 【Securely & Safely Stored】Blow molded hard plastic storage case keeps tools contained and organized, provides a convenient handle for easy transportation and portability..
Check Stock

KOOPOOL Double & Single Flaring Tool Kit for Brake Line HVAC System with Tube Cutter Extra 7 Adapters,Brass Copper Pipe 45 Degrees Flaring Tool

  • 【Multifunction】This flaring tool creates 45-degree double or single flares. It can be applied to copper, aluminum, brass, magnesium, and other soft steel lines. Ideal for brake line, HAVC, air conditioning brass line and so on.
  • 【Durable Material】Yoke made of heat-treated steel material for maximum strength and longevity. Swivel made of chrome-plated alloy steel to reduce friction.
  • 【Applications】Double flaring tool kit suitable for: 3/16”, 1/4”, 5/16”, 3/8", 7/16", 1/2", 5/8" (5, 6, 8, 10, 12, 14, 16mm) single or double flares.
  • Tubing cutter has a 1/8” to 1-1/8” inches (3-30 mm) capacity with inner / outer reamer.
  • 【Tubing Cutter Included】Pipe cutter has 2 rollers and fold-away slide lock reamer deburring blade.
  • used to cut steel, aluminum, and copper tubing.
  • cutting wheel life and adjustment amount for each turn depends on material hardness.
  • 【Easy Storage and Portable】Heavy-duty plastic blow-molded carrying case with latches and handle for easy transportation, safe storage and quick organization.
Check Stock

VEVOR Hydraulic Flaring Tool Kit 45° Double Flaring Tool Brake Repair Brake Flaring Tools for 3/16 -1/2 Brake Flare Tool with Tube Cutter and Deburrer 32 PCS Tube Flaring Tools for Copper Lines

  • Tube Expanding Functions: This hydraulic flaring tool is equipped with a 45° flaring cone and φ 3/16 - 1/2 inch expanding dies and adapters, including, push connects, GM fuel lines, GM transmission cooling line, 45° and double flares, ISO bubble flares..
  • Manual Hydraulic Mechanism: This hydraulic flare kit achieves the pipe expanding with a hydraulic mechanism. The hydraulic tool is designed with exquisite details, such as a pressure relief valve and no-leakage oil cylinder. You can easily operate this tool without effort..
  • Pipe Cutting & Deburring: The double flaring tool comes with a mini pipe cutter and deburrer, which can help to flare pipe. The cutter cuts tubes ranging from 1/8" -5/8" quickly with a solid and sharp blade. The deburring tool is used for cleaning the interior and exterior of tubing..
  • Durability & Portability: The flaring tool is durable 40 CR steel, which is reliable and built to last. Besides, the flaring tool kit is stored in a plastic toolbox, reducing the possibility of missing parts. It is compact and easy to carry..
  • Wide Application: This hydraulic flaring tool kit is suitable for expanding copper piping. It is an excellent tool for repairs on vehicles or making lines off a vehicle, ideal for the refrigeration and ai....
Check Stock

Rustark 14Pcs Double Flares Adapters Tool Kit Replacement Head Fit 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8 Inch OD Tubing Expander Double Flaring Tool for Tubing Expander Flaring Replacement

  • ★1.【What You Get】 — We have prepared you with 14pcs double flaring adapters kit in a variety of sizes for your choice, measures 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″ and 5/8″ O.D. tubing, Each size come in 2 pieces. Full range of sizes is convenient for you to choose the appropriate one for your projects..
  • ★2.【Premium Quality】— Made of heavy duty alloy steel material, sturdy and tough, these flaring tool adapters are heat treated for greater durability and excellent performance, which will last for a long time. Besides, the surface is clearly marked the size for quick and easy identification..
  • ★3.【Precise Design】 — Our flaring adapters are precise in size, and have no burr that is easy to fit the compatible flaring tools. It is convenient for you to choose the right size that fit for your specific needs. Give them a try!.
  • ★4.【Widely Used】These flaring adapters are great for brake line, fuel line, air condition and refrigeration repair applications. Widely applied when flaring in copper, aluminum, magnesium, and brass tubing as well as soft steel brake line tubing..
  • ★5.【After-Sale Service】 – If you have any questions about our products or any problems with your packages, please feel free to contact us. ....
Check Stock

Racewill 25 ft 3/16 Copper Coated Brake Line Kit Includes 16 Fittings and 4 Unions Brake Line Fittings + Brake Line Double & Single Flaring Tool Kit

  • MATERIAL：Racewill copper coated steel line is easy to be bent by hand and flare by simple tools.all brake line fittings are made of durable brass to prevent rust and plated for corrosion resistance.
  • UPGRADE TO 20 FITTINGS: ① 2 x 3/16” (7/16-24) Inverted Tube Nut.
  • ② 10 x 3/16" (3/8-24) Inverted Tube Nut.
  • ③ 2 x 3/16” (1/2-20) Inverted Tube Nut.
  • ④ 2 x 3/16"(9/16-18) Inverted Tube Nut.
  • RUST AND CORROSION PROOFING：Our 3/16 Copper coated steel line are the longest lasting brake line and much better than standard steel tubing. Copper coated brake line are ideal for vehicles experiencing harsh weather and environmental conditions.
  • MAKE DOUBLE & SINGLE FLARES: Designed to use when flaring single or double flare in a variety of material: copper, aluminum, brass, magnesium, and soft steel brake line tubing. Flaring tool apply to 1/2", 3/8", 5/16", 1/4", 3/16" O.D. tubing..
  • WIDELY APPLICATION：Brake line and fittings Fits for Most Hydraulic Braking Systems, Fuel Systems, and Transmission Systems,etc. It is also widely fit for household, industrial and commercial uses..
Check Stock

MASTERCOOL 70058-A Black 45˚ Eccentric Flaring Tool Kit

  • ALUMINUM DESIGN ensures durability while also being light weight for easy portability.
  • CREATE 45˚ FLARES in soft copper, brass, aluminum and mild steel tubing.
  • FLARES SIX SIZES including 1/4, 5/16, 3/8, 1/2, 5/8 and 3/4″ O.D. Tubing.
  • KIT COMES IN BLOW MOLDED PLASTIC CASE with eccentric flaring tool, inner-outer reamer and heavy duty tube cutter for 1/8 – 1 1/8” O.D. Tubing.
Check Stock