Top Copper Wire Thermocouple

Hiland NG-HB Tall Natural G as Patio Heater, 41,000 BTU, 33\ Heat Shield, Built In Ground Fixtures, Hammered Bronze/SS

  • New Pilot assembly comes with thermocouple, venture tube and igniter and igniter wire.
  • Application for Tall Square Commercial Heater.
  • Igniter wire and thermocouple wire's are a total of 22" long.
  • Will also fit most Table Top heaters. PLEASE CAREFULLY COMPARE THE CONFIGURATION OF THIS PART WITH WHAT YOU ARE REPLACING..
  • All AZ Patio Heaters products include a one year warranty against manufacturer defects. We are one of the only suppliers in the US to maintain a complete line of replacements parts and a full service repair center.
Check Stock

2 Pcs Digital 2 Channels K Type Thermometer with 8 Thermocouples (Wire and Stainless Steel) -50~1300°c (-58~2372°f) Dual Measurement Meter Sensor Handheld HVAC Thermometer High Temperature Pyrometer

  • High Accuracy: reading accuracy (±0.1°C ±0.4), fast response using K type thermocouple probe, this digital temperature gauge will bring you a lot of convenience.
  • You will get 2 pcs of K type thermometers, 4 pcs of wire thermocouples and stainless steel thermocouples.
  • Multiple Temperature Display: in addition to the max/ min/ average, data hold, and auto power off functions, this hand held temperature reader is specially designed with a "T1-T2" calculation function, making it easy for the user to find the difference between two samples.
  • ​Portable and Practical: powered by battery, this thermometer with probe is portable and practical, operate it with 6 simple buttons with clear instructions, suitable for beginners and skilled users.
  • Plus, the removable silicone rubber cover protects your device from accidental drops.
  • It is factory calibrated and factory reset, and any standard K type thermocouple connector can be applied to replace the included thermocouple when needed.
  • Wide Measurement Temperature Range: mainframe range of digital k type thermometer is about -50°C ~ 1300°C (-58°F ~ 2372°F).
Check Stock

High Temperature Ceramic K-Type Thermocouple Terminal Block

  • Unglazed Ceramic Thermocouple Connector Block for High Temperature K-type Thermocouples.
  • Connectors are made from Nickel Plated Brass, Accept AWG 8 (3.3 mm) K-type Thermocouple.
  • Big Terminal Screws for Easy Wiring, Accepts Stranded or Solid Wire.
Check Stock

Sunpak-22024 Pilot Assembly for Ng O, Aluminium

  • Suitable for Lpg propane gas heaters /ovens.
  • One flame pilot burner kit including copper tube.
  • Whole kit assembly Copper tube length: 200mm.
Check Stock

3PCS HT-NTC100K Thermistor Sensor for Creality Ender 3 v2 Upgrade 3x15mm 3950 Compatible with E 3D V6 Volcano PT100 Ender-3-5 Pro CR10 3D Printer

  • ...tor】Cartridge temperature sensor. Metal head diameter: 3mm, head length: 15mm,cable wire length: 1 meter,connector: XH2.54 2PIN, （Suitable for heating blocks with holes of 3mm*15mm-3mm*20mm）.
  • 【Widly Compatibility】Product recommended operating temperature -50 °C ~ +280 °C, can replace the cartridge K-type thermocouple temperature sensor. Suitable to print multi kinds of filament.Compatible with the heatblocks with 3mm hole,such as: V6 Volcano PT100 type heated block,CR10 plated copper high temperature heating block,etc.
  • 【High Stability and Accuracy 】Encapsulated in copper case,copper material has better thermal conductivity than stainless steel and improves accuracy.Secured with high temperature adhesive,high stability, no falling off.The internal temperature package to ensure the maximum service life with precision temperature measurement..
  • 【Long Service Life】Compared with other products of the same type that are insulated with ordinary heat shrinkable tubes, this product uses glass fiber with a temperature resistance of 400C degrees for insulation to avoid the possibility of thermal short circuit during high temperature work. Thereby increasing the service life..
  • 【Please Notice】After the product has been opened and left in the ai....
Check Stock

Jiffy J-2M Gray Steamer w/Metal Head/NEMA 5-15, 120V Cord Set

  • Probe Size : 90 x 1.5mm / 3.5" x 0.06" (L*D).
Check Stock

ennoLogic Volt mA Thermocouple Loop Process Calibrator eC370T - 0-20V and 4-20mA Simulator – Portable Millivolt mA and Temperature Signal Generator and Meter for Transmitters Current Loops PLC

  • VERSATILE AND ACCURATE VOLT MA THERMOCOUPLE CALIBRATOR: Signal generator, simulator and volt / mA meter for calibrating, testing and repairing milliamp loops, thermocouples, PLC, temperature control and HVAC systems. Easily generate precise test signals for current and voltage devices (mA, mV, V, Celsius and Fahrenheit ranges)..
  • NUMERIC KEYPAD for ease and flexibility in setting output signals configuring options. HOTKEY programming for each numeric key (long-press immediately outputs user-configured voltage, current or temperature signal). RAMP AND LADDER OUTPUT FUNCTIONS can be custom configured. BUILT-IN 24V LOOP SUPPLY lets you power and read a device or transmitter without needing another multimeter. This greatly simplifies testing 2-wire current loops..
  • MEASURE VOLTAGE OUTPUT SIGNALS from process devices and sensors with two input ranges of 0-100mV (0.01mV resolution, 0.06% accuracy) and 0-20V (1mV resolution, 0.08% accuracy). MEASURE CURRENT TRANSMITTERS within a range of 0 to 24mA with 0.001mA resolution and 0.08% accuracy. MEASURE THERMOCOUPLE TEMPERATURES within a range of -250°C to +1800°C and resolution of ±0.7°C to ±2°C (range and resolution depends on thermocouple type, supported are type K, J, E, T, N, S, R, and B.).
Check Stock

PIE 525B Automated T/C & RTD Calibrator 12 RTD & 14 T/C types

  • Automated RTD and Thermocouple Calibrator. Comes with rubber boot, hands free carrying case, test leads and NIST cert..
  • Easy to use With the PIE 525B you can check and calibrate all your thermocouple and RTD instruments and measure temperature sensors..
  • Take it into the shop, plant or field Carry it without worry - it comes protected with a rubber boot and rugged, low profile switches. Easy to operate even in the dark areas of the plant with the backlit display..
  • Calibrate thermocouple instruments to 0.1 & 0.01 degrees-F & degrees-C The PIE 525B works with the thermocouples you use including types J, K, T, E, R, S, B, N, G, C, D, L (J-DIN), U (T-DIN) and P (Platinel II). Or calibrate from -13.0000 to +80.0000 mV..
  • Calibrate RTD instruments to 0.1 & 0.01 degrees-F & degrees-C Stop carrying around a decade box and RTD resistance tables. The 525B works with the RTDs you use including Platinum 10, 50, 100, 200, 500 & 1000 Ohm (alpha = 3850), Platinum 100 Ohm (alpha = 3902, 3916, 3926), Copper 10 & 50 Ohm, and Nickel 120 Ohm. Or calibrate from 0.000 to 400.000 and 0.00 to 4000.00 Ohms..
Check Stock

NEWREACH Thermocouple and Tilt Switch for Outdoor Patio Heater, Dump Switch for Propane Gas Patio Heater Pyramid Style Tower Heater Firesense Heater, Tilt Switch and Thermocouple Sensor Kit for Winter

  • This thermocouple and tilt switch kit is to fix the problem that the pilot light or flame does NOT stay lit, or the thermocouple is broken..
  • The safety dump switch will automatically stop the heater when it's tilted or dropped, prevent the occurrence of gas leakage when the fire is extinguished and the gas is still on, which is more secure..
  • Easy to install, just connect the probe to the ignition device, the thermocouple to the valve, and the other two ports to the safety dumping switch..
  • Works with propane gas patio heater, outdoor standing patio heater, pyramid-style tower heater, fire sense heater, dome-style heater, tabletop heater, Amazonbasics heater, Hampton Bay patio heater, Lowes patio heater, etc..
  • Thermocouple wire total 350mm with temperature resistance sleeves, with threaded M8*1 and M6. Suitable for weak dump switches with gas R ≤ 10mΩ. Please check the compatibility before purchasing this product..
Check Stock

K Type Thermocouple Temperature Thermocouple Sensor Temperature Detector Temperature Gauge with M4 Thread for 3D Printer Temperature Sensor

  • Type K (chromel–alumel) is the most common general-purpose thermocouple with a sensitivity of approximately 41 µV/°C.[10] It is inexpensive, and a wide variety of probes are available in its −200 °C to +1350 °C (−330 °F to +2460 °F) range. Type K was specified at a time when metallurgy was less advanced than it is today, and consequently characteristics may vary considerably between samples. One of the constituent metals, nickel, is magnetic.
  • a characteristic of thermocouples made with magnetic.
  • They operate very well in oxidizing atmospheres. If, however, a mostly reducing atmosphere (such as hydrogen with a small amount of oxygen) comes into contact with the wires, the chromium in the chromel alloy oxidizes. This reduces the emf output, and the thermocouple reads low. This phenomenon is known as green rot, due to the color of the affected alloy. Although not always distinctively green, the chromel wire will develop a mottled silvery skin and become magnetic. An easy way to check for t.
  • Hydrogen in the atmosphere is the usual cause of green rot. At high temperatures, it can diffuse through solid metals or an intact metal thermowell. Even a sheath of magnesium oxide insulating the thermocouple will not keep the hydrogen out..
Check Stock

Thermocouple & Tilt Switch for Patio Heater, Thermocouple and Dump Switch Repair Kit for Propane Patio Heater Glass Tube Patio Heater Gas Heater, Thermocouple Replacement for Tower Heater, 2 Pack

  • Purpose - This patio heater repair kit is to solve problem of pilot light not staying lit and heater not ignited. Problem can usually be fixed by replacing thermocouple and dump switch correctly..
  • Wide Application - Suitable for thermoelectric gas heater, outdoor propane heater, glass tube patio heater, porch patio heater, standing patio heater, tower heater, Pyramid heater, Hampton Bay heater, etc..
  • Easy to Replace - Probe is connected to the ignition, thermocouple is connected to the valve, the other two ports are connected to the safety dumping switch. If you are handy, this repair kit can save you a new heater..
  • Dimension - The thermocouple wire has total length of 350mm with temperature resistance sleeve. It has an M8*1 fixed thread head with end thread nuts that are compatible with 8mm gas valves. 15A weak current safety dump switch for gas R≤10 mΩ. Probe is not threaded. Note: Check your lead lengths before purchasing..
  • Package included tilt switch X 2pcs, thermocouple X 2pcs..
Check Stock

120630-02 Pilot ODS for Vent Free Propane Gas Wall Heaters by DESA, Glo- Warm

  • The 120630-02 Pilot ODS assembly was used on many of the unvented LP Gas wall heaters and LPG unvented gas log sets and fireplaces..
  • The 120630-03 Pilot ODS assembly take the 120790-01 Dual Wire Thermocouple. The 120790-01 Thermocouple Dual Wire 33 Inch Length with silver and brown transmitter wires that fits the Desa International Unvented Vent-Free infrared gas wall heater..
  • Many of the Unvented Gas Logs sets, Wall Heaters and fireplaces that used the 120630-02 Pilot ODS were made by DESA International and sold under many different brand names by Lowe's, Ace Hardware, Home Depot, Sears, Menards Store and other retailer throughout North America.
  • Some of the Brand Names were Vanguard, Comfort Flame, Glo-Warm, Cozy Heat, Kozy World, Pro Com, Desa International and others..
  • Replaces part numbers: 098245-01, 098245-03, 099440-02, 099440-06, 107667-02, 110803-02, ene 56817, ene 70366, J5527 F.
Check Stock