Top Crosscut Shredders

\Freud 12\\\ x 80T Thin Kerf Fine Finish Crosscut Blade (LU88R012)\

  • Industrial Thin Kerf Fine Finish Crosscut Saw Blade.
Check Stock

Bonsen Paper Shredder for Home Office, 10-Min Continuous Running Time, 12-Sheet P-4 Level Crosscut Credit Card/Staple/Clip Shredder for Home Use, 52dB Low Noise & 6 Gals Bin, BLK

  • 【Shredding Capacity & High Security Level】Bonsen crosscut shredder destroys staples,paper clips, credit cards,junk mails, bills shredded with capacity 12 sheets of paper into tiny pieces (5/32" x 1-12/32").
  • 【Large Bin for Less Emptying】6-gallon bin with transparent window can hold about 500 sheets of A4 paper.Visible design helps avoid paper scraps being drawn into the cutter and causing paper jams.
  • 【Easy Operation & Jam-Proof Protection】The heavy duty home shredder has 3 convenient buttons (auto/off-reverse-forward).The document will be automatically reversed to avoid paper jams.
  • 【Quiet Operation】Compared with other small shredders, this cross-cut household shredder has a low noise level of ≤65dB, which can provide you with a quiet and smooth shredding experience.
  • 【Overheating & Overloading Protection】The home office shredder is equipped with LED indicator lights -standby/ overheat/ bin-full/ overload/ door open status.It shreds paper continuously for up to 6 minutes before a cool down period is needed.
Check Stock

Lynx 4' One Man Crosscut Saw

  • Two man saw is a saw designed to cut wood perpendicular to wood grain. When cutting logs, crosscut saw one man saves more time and effort than axe..
  • The sharp saw teeth of the two person saw are used for push-pull stroke cutting, and the log saws uses special teeth called "rakes" to clean the cut sawdust..
  • In practice, the manual logging saw has certain advantages over the gasoline-powered saw, and the crosscut saw is much lighter than the electric saw..
  • Two man Crosscut saw adopts high-strength 1.5mm thick high-strength steel, and "D"-shaped comfortable handle, which is beneficial to fast cutting..
  • Each one man crosscut saw comes standard with an auxiliary handle, which can be used by one person to assist cutting or used by the second person..
Check Stock

Bonsaii 14-Sheet Home Office Paper Shredder 40-Minute Shredder for Home Use Cross Cut Heavy Duty Shredder CDs Mails Staple Clip with 4 Casters C169-B

  • 【Shredders for Home Office】Based on the patented cooling system, heavy duty paper shredder runs continuously for 40 mins without stopping and destroys about 5000 sheets of paper, ideal paper shredder for home office use, small office and office..
  • 【Shredder for Office Heavy Duty 】Max 14 sheets of paper shredding capacity (letter size, 75g/m²), office paper shredder can shreds paper, cards, CD, mails and staples into tiny particles measuring 13/64 x 1-37/64 inches to protect your personal information safe..
  • 【Large Capacity Bin & Easy to Move】5 gallons large pull-out basket can easily hold 350 sheets of A4 paper, paper shredder for home use also has a large clear window is convenient for observing when the bin can fills up. 4 lockable universal casters for convenience moving to anywhere you want..
  • 【Easy Operation & Jam Proof】With auto start/stop and auto reverse functions, once you shred paper more than the maximum shredding capacity, bonsaii paper shredder helps you clean up the paper jams easily, you can also use the forward or reverse buttons to manually clear the jams..
  • 【58dB Low Noise Level】Relying on advanced noise reduction components, paper shredder can easily achieve 58dB low-noise operation. This crosscut shredder....
Check Stock

Fulton DIY Table Saw Crosscut Sled Kit with 2 UHMW Bars 2 Aluminum Tracks 1 Knob and 1 Bolt along with Full Color HOW TO BUILD YOUR OWN Crosscut Sled Guide Booklet

  • If you own a table saw, you probably have come across a situation or two where you need to make smaller cuts or make cross cuts. You may also have had the need to make repetitive cuts of the same length. Making small cuts, cross cuts and repetitive length cuts is where table saw crosscut sleds excel. Crosscut sleds help stabilize the work piece and are very accurate since they are essentially calibrated to your saw during the sled building process..
  • Some time ago we noticed a lot of companies had UHMW bars available for purchase. While we as a woodworking company know exactly what they are used for, many novice or non-woodworkers do not. That’s when we decided to create this package with pre-cut UHMW bars, pre-cut aluminum track, a knob and bolt and an easy to understand how to guide booklet so you can create your very own, custom crosscut sled to fit your table saw!.
  • UHMW bars are most commonly used as runners for crosscut sleds since they don’t produce as much friction as wood does. Another advantage is that UHMW won’t expand or contract like wood does during drastic weather changes. Each bar is approximately 3/4” x 3/8” which fits most standard table saw slots. UHMW bars are also slick and won’t leave any residue, dust or shavi....
Check Stock

SawStop TSA-SA48 Sliding Crosscut Table Attachment

  • This sliding table is built for versatility. Micro-adjust for detail cuts, and crosscut full sheets with the 55" travel and 48" crosscut capacity..
  • The fence is at least 15% larger than typical crosscut sliders, spanning 43" and extending past 58"..
  • Large flip-stops with scale and magnified lenses help ensure accurate, repeatable cuts every time..
Check Stock

TonGass DIY Crosscut Sled Kit for Table Saw - 2*UHMW Runner Bars 2* Aluminum Tracks 1* Knob & Bolt Set 8* Flat Heat Screws

  • Safety is our priority - This DIY table saw crosscut sled hardware kit will make crosscutting safer and more convenient. Avoid risking your limb when....
  • 13 PIECES CROSSCUT SLED HARDWARE - includes 2 pieces of 19” x 3/4” x 3/8” UHMW runner bars, 2 pieces of 12 inches aluminum mini tracks, 1 set....
  • PRE-CUT AND COMPLETE SET FOR YOUR CONVENIENCE - All the components of this kit are cut and designed specifically for the building of a crosscut sled.....
  • Please take note: The UHMW runners included in this kit will only fit standard 3/4-inch and 3/8-inch track slots and will not fit the Ryobi table saw....
  • FREE HOW TO BUILD A CROSSCUT SLED GUIDE BOOKLET - Follow to a tee or use as a guide, our easy-to-understand guide is perfect for all skill levels.....
Check Stock

Velodi 2 PCS 6302-2RS Replacement Ball Bearing for DeWalt DW708 DW716 DW717 DW718 DWS780 Miter Saw# N127530

  • Compatible with: DeWALT: DW706 Type 1 12 Dual Bevel Miter Saw, DW708 Type 1 Crosscut Miter Saw, DW708 Type 3 Crosscut Miter Saw, DW708 Type 4 Crosscut....
  • Pre-Lubricated and Stable Performance and Cost Effective, Deep Groove Ball Bearings..
  • Double Seal Effectively Saves Grease and Prevent Impurities From Entering..
Check Stock

Planet Pleasures Rainbow Shredders Straight Ribbon Bird Toy 30 L by 1 W

  • Planet Pleasures Rainbow Shredders is the new, fun-colored version of the beloved classic.
  • Rainbow Shredders alleviates boredom by encouraging chewing.
  • All natural palm leaf material is and easy to chew for any size bird.
  • Rainbow Shredders can be tied to mostly anything in your bird's cage, leaving options for use wide open.
Check Stock

Edsrdux DIY Table Saw Crosscut Sled Kit, Smooth No Residue, for Crosscut sleds Jigs, Fixtures or Miter Slots (Size 3/4″ x 3/8″).

  • Kit contains: Our crosscut sled kits come in red- 3/4″x3/8″x36″ 2 pcs.
  • white- 3/4″x3/8″x19″ plus 1 foot primary color T-track, 2 pcs.
  • white- 3/4″x3/8″x48″ 2 pcs. Make your crosscut sled any size for your table saw and cutting requirements..
  • High Quality Material: UHMW is a linear polyethylene with a molecular weight of 3,000,000 to 6,000,000. Thus, it is ten times heavier than regular high density polyethylene, and extremely durable for extensive use..
  • Smooth & No Residue: UHMW bars produce less friction than wood, perfect for runners for crosscut sleds. Furthermore, UHMW doesn’t expand or contract like wood during extreme weather changes. Each bar measures 3/4″ x 3/8″, fitting most standard table saw slots. Unlike wooden bars, UHMW bars are slick, leaving no residue, dust, or shavings behind..
  • Outstanding Impact Strength: With outstanding impact strength even at low temperatures, our crosscut sled kits are ideal for jigs, fixtures, or 3/4″ x 3/8″ miter grooves on table saws, bandsaws, or router tables..
  • Please note: UHMW poles tend to bend during shipping but are easily adjusted..
Check Stock

Bonsaii Paper Shredder, 12-Sheet 30-Minutes Shredder for Home Office Use Heavy Duty Cross-Cut Shredder with 4.2 Gal Pullout Bin & 4 Casters for Credit Card/CD Anti-Jam Shredding Machine (C266-A)

  • 【30 Minutes Continuous Running Time】bonsaii 12-sheet heavy duty paper shredder with advanced patented cooling system and high-efficiency motor, can continuously run up to 30 minutes, which can shred about 2100 sheets of paper. Ideal shredders for small office and home office use.
  • 【Large Wastebasket & Safe Protection】Crosscut paper shredder with 4.2 Gallons pullout bin can hold 270 sheets of A4 paper for less frequent emptying. The transparent window makes it easy to see when the bin is full of paper scraps. The paper shredder will stop working once you pull out the bin, keeping you safe.
  • 【Suitable for Home Office Use】Shreds up to 12 sheets of paper per pass into 13/64 x 1-25/32 inches (5x45 mm) cross-cut particles with P-3 high security level. This home office shredder can shred CD, credit card, mails even with staples and clips as well. The durable steel cutter meet with different shredding needs..
  • 【Jam Proof & Easy to Operate】bonsaii paper shredder has auto start/stop and manual reverse functions, which helps you clean up paper jams easily or when shred a useful file mistakenly, you can push to "REV" to reverse the paper. 71 inches/minute shredding speed makes your work more efficient.
  • Protection Features & Friendly Customer Service】T....
Check Stock

Woolsche CD222P 8-Sheet Cross Cut Paper Shredder with 3.43-Gallon Visible Bin，P-4 Security Level, 3-Mode Design Shred CD and Credit Card Paper Shredder for Home Use

  • Paper shredder:8-sheet cross cut paper shredder for home office use, it can shred paper with Staples/CD/Card，Paper shred into 5/32’’ X 1-17/32’’(4x39mm),shredder is with ETL certification..
  • Overheat protection: Woolsche paper shredders for home use heavy duty continuous working time of 4 minutes, overload operation of the shredder machine will automatically start overheating protection, shredders for home office heavy duty will restart automatically after 30 minutes..
  • P-4 security level: Home office shredder for shredding paper with staples and credit cards /CDs(1piece at a time), receipts, bills and important documents. shredders for home office Shred paper cannot be recovered..
  • Easy to use: Once the Shredders for home sensor detects something to be shredded, shredder will work automatically. Manual reversal (press "REV") to easily clear any paper jam..
  • Low-Noise paper shredder for home use: Our shredder for home use works with a maximum noise level of no more than 65 db, making it ideal for use in the office or at home. paper shredders for home use won’t affect our studies and works..
Check Stock