Top Steel Crosscut

TEKTON 7 Inch Long Nose Pliers | PGF10007

  • Extra long, slender nose reaches deep into tight spaces and grasps small parts.
  • Thin, sleek build makes these pliers light and exceptionally maneuverable.
  • Crosscut teeth distribute force evenly for sure grip in any direction.
  • Side cutter with induction-hardened blades (HRC 58-64) cleanly snips copper, aluminum, and other soft metal wire.
  • Slim, nonslip grips provide comfort and control without adding bulk.
  • Total Length: 7.5 in., Width: 2 in., Height: 0.6 in., Head Length: 3 in., Handle Length: 4.5 in., Grip Length: 3.5 in., Cutting Capacity for Low Carbon Steel Wire: 8 AWG.
Check Stock

DIY Crosscut Table Saw Sled Kit with a Specific Guide Booklet to Build Your Own Tablesaw for More Accurate and Safer Saw Working, Table Saw Accessories, Pack of 1

  • ... table saw sled for your need, but also lies in the sense of accomplishment and creativity it brings, being more motivated and confident in the following saw working when you use it..
  • Vary Size – You may build your own unique sled to fit your table saw.
  • Make your desired crosscut sled size and meet your unique cutting requirements..
  • Table Saw Accessories - 3/4'' x 3/8'' UHMW bar is the often used material in crosscut sled runners which fits most table saw and will not expand under sudden temperature changes as well as slick enough to slide smoothly.
  • The aluminum t track is solid extruded and can be trimmed to match your sled.
  • (ATTENTION: The bars DO NOT fit RYOBI table saw track slots).
  • Package Included – Crosscut table saw sled accessories (2 UHMW bars (3/4'' by 3/8'' ), 2 T tracks, 1 star knob and bolt, wood screws of varying lengths) and 1 specific guide booklet (glue and other building materials are not included).
  • Backs its products within 90 days warranty.
  • Please feel free to contact us with any questions you may have..
Check Stock

Edsrdux DIY Table Saw Crosscut Sled Kit, Smooth No Residue, for Crosscut sleds Jigs, Fixtures or Miter Slots (Size 3/4" x 3/8").

  • Kit Contains: Our crosscut sled kits come in Red-3/4"x3/8"x36" 2pcs. white-3/4"x3/8"x19"+1feet T-track primary color, 2pcs. white-3/4"x3/8"x24"2pcs. white-3/4"x3/8"x36"2pcs. white-3/4"x3/8"x48" 2pcs. Make your crosscut sled to the size you want or need for your table saw and cutting requirements..
  • High Quality Material: UHMW Polymer (plastic) is a linear polyethylene material with a molecular weight ranging from 3,000,000 to 6,000,000. Furthermore, because UHMW is ten times heavier than regular high density polyethylene, it is extremely durable for constant repetitive use..
  • Smooth&No Residue: Because UHMW bars produce less friction than wood, they are commonly used as runners for crosscut sleds. Another benefit is that UHMW does not expand or contract like wood during extreme weather changes. Each bar measures about 3/4" x 3/8" and fits most standard table saw slots. UHMW bars are also slick and will not leave any residue, dust, or shavings behind, as do wooden bars..
  • Outstanding Impact Strength: Even at low temperatures, jigs, fix....
Check Stock

BOSCH CM8S 8-1/2 Inch Single Bevel Sliding Compound Miter Saw Blue

  • CONVENIENT: The Bosch CM8S features a bevel lock lever and bevel turret stops located on the side of tool for quick and easy adjustments without....
  • SUPPORTIVE: The miter saw provides an integrated expanding base extensions that expands up to 29-Inches left to right for additional work-piece....
  • CONVENIENT: Features a miter detent override, an intuitive, easy to access thumb-actuated override as well as a clear lower guard for an unobstructed....
  • PORTABLE: The Bosch CM8S miter saw CM8S has the same crosscut capacity of 12-1 4 in. as a 10 inch miter saw but is 30% lighter. The Bosch exclusive....
Check Stock

Weaver Curved Saw Scabbard 27 With Snap Hook, Black

  • JAPANESE AZEBIKI SAW: Azebiki Saw is used to cut holes, mortises, grooves in mid-panel, and sliding dovetails. These saws are also useful for working in restricted areas without damaging adjacent work—Japanese essential carpentry tools..
  • UNIQUE ROUNDED BLADE: The curved blade allows you to start cutting while cutting into a flat surface. The moderately short blade is a real virtue. You can get it into corners that were impossible to reach with any previous saw..
  • RYOBA DOUBLE-EDGED: Double-edged pull saw for both rip cut and crosscut. You can enjoy silky smooth cutting regardless of the wood grain. All KAKURI saws are manufactured in Japan and handcrafted by Japanese craftsmen..
  • RAZOR SHARP JAPANESE STEEL BLADE: The blade is made of Japanese steel and you can enjoy the effortless cutting. Japanese saws are used with a pulling force, and their sharpness results in a clean-cut..
  • PRODUCT SPECIFICATIONS: Made in Japan / Blade: Japanese high carbon steel / Handle: Japanese wingnut, Cane / Blade Length: 3.5" / Blade Thickness: 0.015-0.031" / Kerf Width: (Rip-cut) 0.031", (Cross-cut) 0.039" / TPI: (Rip-cut): 7.3, (Cross-cut): 15.3 / Overall Size: 15.8" 2.5"×0.7" / Weight: 2.5 oz.
Check Stock

DEWALT DW715 15-Amp 12-Inch Single-Bevel Compound Miter Saw (Discontinued)

  • Includes: a carbide blade, dust bag, blade wrench and comfortable side handles in the base.
  • Miter detent override that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • Adjustable stainless steel miter detent plate with 11 positive stops.
  • Tall sliding fences that support crown moulding up to 5-1/4-Inch. nested and base moulding up to 6-1/2-Inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • Crosscut capacity up to 2×8-Inch dimensional lumber.
  • Bevels to the left up to 48° and to the right up to 3°, with positive stops at 0°, 45° and 33.9° for cutting crown moulding laying flat.
  • 4 hardened steel bevel stops at 0°, 33.9°, 45° and 48° that delivers versatility at most common bevel angles.
  • Cam lock miter handle with miter detent override that eliminates the need to twist the handle to lock in on the angle.
Check Stock

Ryoba 9-1/2inch Double Edge Razor Saw for Hardwoods from Japan Woodworker 1.7mm Teeth Pitch

  • Made in Japan with durable long lasting Japanese steel. The blade is impulse hardened for extreme sharpness and long life, then coated for corrosion....
  • Japanese style pull saws are easier to use, and cut very straight and precise lines as compared to push saws.
  • Adjustable pivot point. There is a joint located in between the blade and blade’s tang that permits the blade and handle to be angled to facilitate....
  • The traditional rattan wrapped handle is very functional and has timeless styling.
Check Stock

Gyokucho Ryoba Double Edge Razor Saw Long 240mm Model 650 Blade with New TPE Grip

  • Rip TPI: 7, uses the same blade as the model 650.
  • Made in Japan with durable long lasting Japanese steel. The blade is impulse hardened for extreme sharpness and long life, then coated for corrosion....
  • Japanese style pull saws are easier to use, and cut very straight and precise lines as compared to push saws.
  • Adjustable pivot point. There is a joint located in between the blade and blade’s tang that permits the blade and handle to be angled to facilitate....
  • Brand new TPE grip provides a solid no slip surface in all conditions.
Check Stock

Table Saw Small Parts Crosscut Sled - Table Saw Sled Kit Includes Blade Guard Miter Track Stop – 900 Angle Small Moldings Crosscut Saw - Table Saw Sled Features Zero-Clearance Support

  • Crosscut Sled For Table Saw: This miniature cross cut sled lets you use your table saw to cut small parts to length. Our sled includes a miter track....
  • Great for cutting: Our crosscut sled is great for cutting dowels, tenon stock, and small moldings at a precise 90° angle, with little to no tear-out..
  • Zero-Clearance Support: This sled system features zero-clearance support, which reduces the chance of small pieces getting stuck between the blade and....
  • Extremely Durable: Our aluminum table saw sled is ideal for constant repetitive use. This zero clearance table saw insert does not absorb moisture and....
  • Fits Most Table Saws: A small plastic ramp on one side of the kerf carries the drop-off piece away from the blade. The rear-mounted blade guard is....
Check Stock

MAXPOWER 3Pcs Pliers Set, 5 in 1 Multifunctional Wire Stripper Crimper Cutter, Long Nose Pliers, Diagonal Side Cutting Pliers, Linesman Pliers 8 inch

  • 20% Labor Saving - Eccentric Labor-saving Design with Premium forged 60CR-V steel for strength and durability.
  • 5 in 1 Multifunctional - Pliers tool set provides Wire Stripping, Crimping, Cutting, Twisting, and Gripping functions.
  • Wire Stripper and Crimper Capacity - Strips 10-18 AWG solid and 12-20 AWG stranded wire.
  • Wire terminal crimping from 0.5 to 2.5, wider than standard pliers set.
  • Crosscut Teeth - Help multiple wires stay in position while twisting. Hardened teeth can also be used as smoothing and shaping files.
  • Comfortable Grip - Environmental PP+TPR Handle, more cutting power over other cutting pliers.
Check Stock

Vornado 184 Whole Room Air Circulator Tower Fan, 41', 184-41', Black & Duo Small Room Tower Air Circulator Fan

  • Product 1: V-FLOW TECHNOLOGY – Utilizes Vornado's signature V-Flow Technology to provide complete circulation of all the air in a room. Unique crosscut outlet create a wide span of constant airflow, eliminating the need for a wobbly oscillating base..
  • Product 1: MOVES AIR FURTHER – Powerful motor produces higher volume of air movement and pushes air up to 100 feet. Blade Diameter-4.039.5 inch.
  • Product 1: ENERGY SAVING TIMER – Choose from 1, 2, 4, or 8 hour timer to ensure you run your tower circulator in an efficient, energy-saving way..
  • Product 1: SIMPLE CONTROLS – Push-button controls allow you to select from 4 speed settings, and a remote control that magnetically cradles at the top of the unit provides additional convenience..
  • Product 2: CONTINUAL AIRFLOW – Utilizes Vornado's signature Versa-Flow Technology to provide complete circulation of all the air in a small room Unique crosscut outlet create a wide span of constant airflow eliminating the need for a wobbly oscillating base.
  • Product 2: DUAL VERSATILITY — Easily switch airflow direction from a small-footprint vertical tower position to a low-profile horizontal position.
  • Product 2: MOVES AIR FURTHER – Powerful motor produces higher volume of air movement and pushes air up to 50 f....
Check Stock

DEWALT Wet Tile Saw with Stand, 10 Inch, 15-Amp, 1,220 MWO, Corded (D36000S)

  • Cutline indicator, rigid frame, and stainless-steel rollers provide cutting accuracy to within 1/32 in. over 30 in. cuts.
  • 37 in. rip cut capacity (41 in. with plunge) and 18 in. cutting clearnace left of blade allows users to rip 36 in. x 36 in. tile in half.
  • 8-1/2 in. crosscut capacity is ideal for cutting 6 in. sills and 8 in. x 48 in. planks at a 30% offset.
  • 91 lbs. for portablility to and from the jobsite.
  • 28-7/8 in. width from column to cart edge fits through standard 30 in. door frames.
  • 15 Amp motor provides 1220 MWO for demanding applications.
  • 18 in. x 36 in. and 24 in. x 24 in. tile fully contained within water tray system, helping keep the work area clean and dry.
  • Integrated storage for the cart extension, miter guide, and wrenches keeps accessories with the saw during transportation.
Check Stock