Top Current Sensing

Seco-Larm E-931-S35RRQ Enforcer Indoor/Outdoor Wall Mounted Photoelectric Beam Sensor with 35 Foot Range

  • Weatherproof (IP66) construction for indoor/outdoor usage.
  • Dark ON operation, Adjustable sensing distance, Compact size.
  • 12~240VDC / 24~240VAC Operation, Current: Up to 40mA@12VDC.
  • Bracket and mountinghardware Included, Pre-wired 6ft (1.8m) cord.
  • Sensing Range: 0.5' to 35' (0.1 - 11m), Response Time: 10ms (Max).
Check Stock

Gebildet 5pcs Recessed Wired Security Window Gate Contact Sensor Alarm Magnetic Reed Switch Black, Magnetic Door Sensor, Normally Closed Magnetic Switch

  • Product Name: Door Magnetic Sensor Switch.
  • Product size: 29*15.5*9mm Wire length: 33cm.
  • Sensing distance: 10mm-15mm Service life: 1000000 times.
  • Working current: 0.5A/Working voltage: 100V (1-100V)/Maximum power: 10W.
Check Stock

KouTouy Current Switch, Normally Open AMP Sensor Sensing Switch Monitoring Relay, AC 1-50A Detectable

  • ☛Self-powered, no external power supply required..
  • ☛Offers a sensing range of 1 to 50 amps and universal, solid-state outputs..
  • ☛The device output will switch loads at 120 Vac and 2.5 Amps maximum. In 240V circuit, only one 120V hot line is connected..
  • ☛Faster response time, once current flow is detected, it closes a set of contacts immidiately..
  • ☛Accurate and dependable, offers a sensing range of 1 to 50 amps and universal, solid-state outputs. Accuracy: 1%.
Check Stock

CR Magnetics CR4395-EH-120-110-X-CD-ELR-I Current Sensing Relay with Internal Transformer, 120 VAC, Energized on High Trip, 1 - 10 AAC Trip Range

  • Current sensing relay for monitoring electrical current.
  • Current carrying wire is routed through an aperture.
  • Electrical isolation between circuits (SPDT).
  • Variable trip point range with adjustable timer for stability.
  • UL recognized for safety and RoHS compliant for hazardous substances.
Check Stock

AC Current Sensing Switch Flameproof Adjustable 0.2~30A IP30 Self-Powered Sensing Switch(Normally Closed)

  • Control of various automatic industrial control equipment, flash, buzzer, relay, single chip, or other power load equipment..
  • Using the electromagnetic mutual inductance principle of current, the advanced switch output detection, monitoring and protection alarm type products without power supply technology are adopted..
  • Widely used in substation, frequency control device, inverter device, electrolytic plating, electric locomotive, street lamp monitoring, coal mine and other need current monitoring automation industry..
  • Compared with traditional transformer and thermal protector, it has the advantages of high accuracy, stable performance and long service life..
  • The current-sensing switch is for safe, convenient monitoring or detecting the current of electric equipment. An ideal choice for automatic industrial control equipment and electric power monitoring..
Check Stock

TPI 270 HVAC-R Autoranging Digital Clamp-On Meter Digital Multimeter 40 Megaohms Resistance 600V AC/DC Voltage 400A AC 400 Microamperes DC Current

  • Digital clamp meter measures AC current to 400 amp, DC current to 400 microamperes, AC and DC voltage to 600V, resistance to 40 megohms, frequency to....
  • Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform.
  • Clamp with 35mm (1.37") jaw opening measures current without touching or interrupting the circuit.
  • Includes K-Type thermocouple probe to measure temperature.
  • Meets IEC safety standard 61010, and is rated for CAT III installations to 600V.
Check Stock

Fluke 325 Clamp Multimeter AC-DC TRMS

  • Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohms.
  • True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform.
  • Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit.
  • Audible continuity sensor confirms that the circuit conducts electricity.
  • Meets IEC safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V.
Check Stock

Slim DIN Rail Mount AC/DC Current Sensor Module, Based on ACS712. (+/-20Amp)

  • The item disign based on ACS712 IC. The item provides economical and precise solutions for AC or DC current sensing in industrial, commercial, and communications systems. Typical applications include motor control, load detection and management, switched-mode power supplies, and overcurrent fault protection..
  • Operating Voltage: Regulated 5VDC. Operating Current: 20mA(max). Load Maximum Current: +/-5Amp, +/-20Amp and +/-30Amp selectable. Load Frequency Bandwidth: DC ~ 80 kHz. Minimum Isolation Voltage: 2.1 kV(RMS). Output voltage proportional to AC or DC currents. LED indicator for power supply +5V. Pin jumper option for signal output capacitor..
Check Stock

Harmony Audio HA-A1500.1 Car Stereo Class D Amp Mono 3000 Watt Subwoofer Amplifier - 1 Ohm Stable - Includes Bass Remote

  • Power – 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms.
  • Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
Check Stock

BOSS Audio Systems Elite BE1500.1 Monoblock Car Amplifier - 1500 Watts, 2 4 Ohm Stable, Class AB, Mosfet Power Supply, Great For Subwoofers

  • POWER: 1500 Watts Max x 1 @2-Ohms, 750 Watts Max x 1 @4-Ohms.
  • CLASS A/B TOPOLOGY: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • MOSFET POWER SUPPLY: A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss And eliminating all secondary feedback circuitry.
  • VARIABLE LOW-PASS CROSSOVER: Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • SWITCHABLE BASS BOOST: Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

Pump Boys and Dinettes

  • Power – 450 Watts Max x 4 @2-Ohms, 225 Watts Max x 4 @4-Ohms, 900 Watts Max x 2 Bridged @4 Ohms.
  • Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Mosfet Power Supply – A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
  • Variable BASS Boost – With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s).
  • Bridgeable – Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels.
  • Specs – Dimensions: 13.5” x 10.31” x 2.25, Weight: 12 lbs..
  • Warranty – BOSS Audio Systems provides a powerful 6-year Platinum Onli....
Check Stock

BOSS Audio Systems PT1000 2 Channel Car Amplifier - 1000 Watts Full Range Class A/B 2-8 Ohm Stable Mosfet Power Supply Bridgeable

  • Power - 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms.
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
Check Stock