Top Current sensing Motor Driver

Kiro&Seeu L293D DC Motor Drive Shield Stepper Motor Drive Shield Expansion Board Compatible with Arduino Duemilanove Raspberry Pi

  • This is a commonly used DC motor drive module, using a small current 293 chip DC motor driver chip..
  • Using this chip you can use DC motors and power supplies of up to 10 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel..
  • Tested compatible for Arduino Mega, Diecimila & Duemilanove..
  • 2 interface for 5V Servo connected to the Arduino's high-resolution dedicated timer - no jitter..
  • Multi-function, easy to operate, a strong driver library support and feature updates..
Check Stock

4 Axis CNC Nema23 Stepper Motor Dual Shaft 425oz-in 3A+FMD2740C Driver 40V 4A+400W 36V Power Supply+USB CNC Breakut Board Controller Kit For CNC Router

  • ♞【Product】4 Axis nema23 stepper motor driver usbcnc controller kit.
  • Wirings: "A+"=Red / "A-"=Green / "B+"=Yellow / "B-"=Blue.
  • ♞【Driver】FMD2740C driver Voltage: DC12-50V.
  • Current: rated maximum output reaches: 4A.
  • Subdivision precision 2 8 16 32 64 128 10 20 optional.
  • ♞【4 Axis USBCNC Breakout Board】USB port,only support USB CNC Software,not fit for Mach3 software.Our parcel include a CD,it include the user manual and USBCNC software.
  • ♞【400W 36V 11A DC Switching power supply】Please flip the side input voltage selector switch,Input: AC110V-120V or AC220V-240V.
  • 【Computer system 】Support Win XP/7/8/10,if you can not get the activation code on Win 10,pls let us know,we will help you to solve it..
Check Stock

PWM DC Motor Speed Controller, DC10-55V/40A Max 60A Stepless DC Motor Speed Controller with Forward-Brake-Reverse Switch Adjustable Potentiometer and LED Display,Continuous Current 40A

  • 【Regulate Range】 Input supply voltage: DC 10V-55V.
  • Control frequency: 15KHZ.Please connect the DC power supply to use! Do not continue to use excessive load, the continuous current is 40A, and the peak value is 60A..
  • 【Switch Function】The PWM DC motor speed controller come with switch function. High power speed controller switch which is much more adaptable and conveniently change the motor direction..
  • 【Excellent Heat Dissipation Performance】 The enclosure of the speed controller for motor is an aluminum enclosure. Aluminum shell is very strong to prevent damage, holes on its side and top which are helpful for heat dissipation..
  • 【Easy to Operate】The stepless motor controller has a simple potentiometer knob adjusts the motor speed from 0% ~ 100% smoothly. And with LED display is accurate to show 0 ~ 100% of the motor speed. The input voltage of PWM motor speed controller should be equal to the rated voltage of the motor within 10-55V,or it will be burnt.Do not reverse the positive and negative poles！.
  • 【Application】 The dc motor driver can be used to brush motor speed regulation, light dimming regulation in the DC circuit.Note: The motor cannot be used in electric veh....
Check Stock

DORHEA PWM DC Motor Speed Controller DC 10-55V 24V 36V 48V 60A Stepless Motor Speed Controller with Adjustable Potentiometer Forward-Brake-Reverse Switch and LED Digital Display DC Brush Motor

  • Motor speed controller input supply voltage: DC 10V-55V.
  • The motor speed controller is an aluminum case, very strong to prevent damage, holes on its side and top which are helpful for heat dissipation..
  • The pmw dc motor speed controller come with switch function. High power speed controller switch which is much more adaptable and conveniently change the motor direction..
  • The stepless motor knob adjusts the motor speed from 0% ~ 100% smoothly with LED display is accurate to show 0 ~ 100% of the motor speed..
  • The input voltage of PWM motor speed controller should be equal to the rated voltage of the motor within 10-55V,or it will be burnt, the dc motor driver can be used to brush motor speed regulation, light dimming regulation in the DC circuit.Note: The motor cannot be used in electric vehicles..
Check Stock

Nema23 2N.m 57 Hybrid Closed Loop Servo Stepper Motor 2Nm 76mm+HSS57 Servo Driver Controller CNC Kit 24-50V DC For CNC Router Engraving Milling Machine

  • Name:Nema23 2N.M Servo Motor Driver CNC Kit.
  • Servo Driver:HSS57 2-Phase Hybrid Stepper Servo Driver.
  • The torque reducing is much lower than open loop stepper motor when it is at higher speed.The high speed performance and torque are enhanced in a....
Check Stock

MELIFE 3D Printer Controller Kit RepRap, RAMPS 1.4 + Mega 2560 Board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display 3D Printer Controller Kit for RepRap.

  • The Mega Pololu Shield, or RAMPS for short,designed to fit the entire electronics needed for a RepRap in one.RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion..
  • The Mega2560 is an ATmega2560 as core microcontroller,development board itself has 54 groups digital I / O With the bootloader, download the program directly via USB without having to go through other external writer..
  • Large screen 12864LCD integration for SD card in the back, after slicing the file into the for SD card, you can select the corresponding files on the LCD.The board has encoder, can be achieved parameter adjustment, and the file selection print!The ramps can be Plug-and-Play, but it need to modify the firmware to support..
  • A4988 Stepper Motor Driver can adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated..
  • Packing List:RAMPS 1.4*1+Mega 2560 R3 with cable *1+A4988 Stepper Motor Driver*5+Heat sink*5+LCD control screen+cable*1.
Check Stock

Aideepen 5pcs Dual H-Bridge DC Stepper 1.5A 2 Way DC Motor Driver Module Replace Stepper L298N for Smart Car Power

  • Use of imported original chip, built-in low on-resistance MOS switch.
  • Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motor.
  • Dual 1.5A * 2, the peak current to be 2.5A, built-in thermal protection circuit, do not be afraid motor stall burned, automatic recovery after the temperature dropped.
  • Minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered.
  • Small size, light weight, low standby current, is the ideal choice for your car model.
Check Stock

4 Axis Stepper Motor Nema 23 Dual Shaft 425oz-in 112mm+CW5045 Driver 4.5A 256 Microstep+5 Axis Breakut Board+400W 36V Power Supply CNC Controller Kit for CNC Router Engraver Milling Machine

  • ♞【Stepper Motor】4pcs 23HS2430B nema23 stepper motor.
  • ♞【Stepper Motor Driver】4pcs CW5045 driver, current: 1.3A-4.5A.
  • Driver microstep: 1 (1.8°), 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256, 1/5,....
  • ♞【Control Board】1pcs 5 Axis breakout boad with cables,this breakout board needs to be connected to the parallel port and USB port of the....
  • ♞【Power supply】1pcs 400W,36V/9.7A switching power supply.
  • ♞【Application】This cnc kit are widely used in engraving machine, printer, medical equipment, embroidery machine, stage lighting, textile....
Check Stock

Makita XT614SX1 18V LXT® Lithium-Ion Cordless 6-Pc. Combo Kit (3.0Ah) & XAG04Z 18V LXT® Lithium-Ion Brushless Cordless 4-1/2” / 5\ Cut-Off/Angle Grinder, Tool Only

  • Product 1: 1/2" Driver-drill with 2-speeds (0-600 & 0-1, 900 RPM) delivers up to 480 in. Lbs. Of max torque.
  • Product 1: 1/2" Driver-drill features a compact design at only 7-1/4" Long and weighs only 3. 3 lbs. With battery for reduced operator fatigue.
  • Product 1: Variable speed impact driver (0-2, 900 RPM & 0-3, 500 IPM) provides 1, 460 in. Lbs. Of max torque for a wide range of fastening applications.
  • Product 1: 6-1/2" Circular saw delivers 3, 700 RPM for faster cutting and ripping through wood and weighs only 7. 3 lbs. With battery.
  • Product 2: Automatic Speed Change technology adjusts speed and torque during operation for optimum performance.
  • Product 2: Active Feedback-sensing Technology (AFT) turns the motor off if rotation of the wheel is suddenly forced to stop.
  • Product 2: The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life.
  • Product 2: Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
Check Stock

AOICRIE 5Pcs L298N Dual H Bridge Stepper Motor Driver Board For Arduino (5pcs)

  • 【Package Included】- 2pcs L298N Motor Driver Controller Board Modules..
  • 【Item Condition】- Drive voltage 5V-35V, high working power to 46V. Large current can reach 3A MAX and continue current is 2A. Power to 25w.(NOTE: To avoid damage, please use an external 5V logic supply when using more than 12V driving voltage.).
  • 【High Quality】- Use L298N as the main driving chip, so the module has such features as strong driving ability, strong anti-interference and low calorific value. And it also use large-capacity filter capacitor and diode with freewheeling protection function, thereby improve the reliability of module..
  • 【High Efficiency】- Dual-channel H-bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
  • 【Easy of Use】- No assembly required. This L298N board comes ready to go. Just wire up motors and power, this thing will work wonders..
Check Stock

STEPPERONLINE Closed Loop Stepper Motor 1 Axis CNC KIT 9 Nm/1274.76oz.in Nema 34 Stepper Motor & 0-8.2A 24-80VDC Stepper Driver

  • High torque, long life, low temperature rise, low noise, well-package.
  • Motor specifications: 2 phase, Torque: 9 Nm(1274.76oz.in), Current: 6A.
  • Driver Specification: Power: +24-80VDC,  Output Current: 0-8.2A, Temperature: -20℃~+65℃.
  • Suit for 3D printer/CNC machine/Carving Machine/Dispenser/Automation Application.
  • 100% service satisfactory. We provided this stepper motor kit with 30 days free replacement or refund, 1 year warranty and whole life customer service from the date of purchasing..
Check Stock

STEPPERONLINE Closed Loop Stepper Motor 1 Axis CNC KIT 12.0 Nm/1699.68oz.in Nema 34 Stepper Motor & 0-8.2A 24-80VDC Stepper Driver

  • High torque, long life, low temperature rise, low noise, well-package.
  • Motor specifications: 2 phase, Torque: 12.0 Nm(1699.68oz.in), Current: 6A.
  • Driver Specification:Power: +24-80VDC,  Output Current: 0-8.2A, Temperature: -20℃~+65℃.
  • Suit for 3D printer/CNC machine/Carving Machine/Dispenser/Automation Application.
  • 100% service satisfactory. We provided this stepper motor kit with 30 days free replacement or refund, 1 year warranty and whole life customer service from the date of purchasing..
Check Stock