Top Cutting Depth Guide Sets

Mini Circular Saw, HYCHIKA Compact Circular Saw Tile Saw with 3 Saw Blades 4A Pure Copper Motor, 3-3/8”4500RPM Ideal for Wood, Soft Metal, Tile and Plastic Cuts, Laser Guide, Scale Ruler

  • 【DURABLE AND POWERFUL MOTOR】: Featured with a 4 Amps copper motor, the compact circular saw can reach a high cutting speed of 4500RPM to cut tile, wood, plastics, plaster board, PVC with ease. Heavy gauge iron wraparound base and aluminum upper cover adds extra durability and safety..
  • 【3 BLADES AND COMPACT】: Comes with 1x30T HW for wood cuts/ 1x36T HS for metal cuts/ 1pcs grit diamond blade for tile cuts, small size and weight also make it a good addition to your toolkit, great for DIY projects around the house and your workshop. (1"for Wood.
  • 【PRECISE AND ADJUSTABLE CUTTING DEPTH】: With the laser guide, the mini circular saw keeps the cutting on a straight line. Also the parallel guide attachment allows you to make a precise and quick cut with ease. Easy-set depth gauge lever for adjustable cutting depth from 0-25mm(1’’). Laser Level: Class 2..
  • 【ERGNOMIC AND SAFE】: The soft rubber handle reduces hand fatigue effectively. Also with a dust port and the saw dust pipe, you can connect it to your vacuum to maintain a clean working environment. The double protection switch enhances safety in use..
  • 【PACKAGE CONTENTS】 1 * Compact Circular Saw.
Check Stock

GALAX PRO 5.8 Amp 3500 RPM Circular Saw, Max. Cutting Depth 1-11/16\(90°),1-1/8\(45°）Compact Saw with 4-1/2\ 24T and 40T TCT Blades, Vacuum Adapter, Blade Wrench, and Rip Guide

  • Powerful motor and application: A motor of 5.8 Amps delivers full-size performance at 3,500 rpm to cut wood, plastics, plaster board and PVC pipe in a single pass.
  • Motor postposition separate the front and rear gravity, making the operation comfort.
  • Adjustable cutting depth: There is a bevel lever allows you to change your cutting angle up to 45 degrees. It's the safe, stress free way to make accurate cuts. The max cutting depth is 1-11/16" at 90°and max cutting depth is 1-1/8" at 45°.
  • Compact and ergonomics design: Compact in structure, small in size and light in weight. It’s very lightweight to handle. Optimized ergonomic slim grip provides easy to one-handed operation and less fatigue.
  • Rip guide and dust extraction: The design making the cutting line straight but not curved. Dust extraction facility with build-in dust port and vacuum adaptor, which keeps clean area. The lower guard and upper guard greatly improve the safety of use.
  • What you get: 1* mini circular saw, 1* 24T tungsten-carbide-tipped wood/plastic blade,1* 40 T tungsten-carbide-tipped wood/plastic blade, 1* Allen key for saw change, 1* rip guide, 1* vacuum adapter, 1* user Manual, 1* warranty card.
Check Stock

11-Amp 2 HP Fixed-Base Wood Router with Edge Guide, 1/2-Inch, 3/8-Inch and 1/4-Inch Collets and Carrying Bag

  • POWERFUL & EFFICIENT: 11-Amp motor produces 2 peak horsepower to handle a range of woodworking applications.
  • This router also features a 25, 000 RPM for the fastest and cleanest cuts. Easily tackles the tough hardwoods..
  • PRECISE DEPTH ADJUSTMENT: Micro-fine depth adjustment ring provides precise depth adjustments in 1/64-inch increments. This router can be used for a broad range of applications, including precise bit plunging, edge forming, slot cutting, laminate trimming and dovetail cutting..
  • DURABLE & COMFORTABLE: The motor housing and bases are made of aluminum, and the power switch is completely dust-sealed for added durability.
  • Rubber molded handles provide you with superior comfort, balance, and control, even during extended jobs.
  • GREAT COMPATIBILITY & EDGE GUIDE: Accepts all 1/4, 3/8 and 1/2-inch router bits.
  • The included edge guide lets users route perfectly straight lines, helping to create grooves along the workpiece.(The router itself is equipped with a 1/2' collet chuck, extra 3/8'' & 1/4'' collets are packed in the carrying bag.).
Check Stock

DEWALT 20V MAX* XR Brushless Drywall Cut-Out Tool (Tool Only) (DCE555B)

  • Tool-free bit change enables fast bit changes without the need for a wrench..
  • LED light helps to illuminate dark work surfaces for accurate cutting.
  • Accepts 1/8", 5/32", and 1/4" bits and collets.
  • Compact size and weight designed to reduce fatique during periods of extended use..
  • Depth guide designed for consistent cutting depth and consistent engagement with cutting edge of bit.
Check Stock

RIDA 4200RPM Cordless Brushless Circular Saw with Laser Guide,Adjustable Cutting Depth and Angle Aluminum Base Plate 4.0Ah Lithium-ion Battery and Fast Charger 2 Blades

  • ☆ Highly efficient brushless motor has less physical contact , which lead to less motorwear and heat build-up . Less energy consumption highly....
  • ☆ Adjustable bevel and depth levers for a variety of cut angles , cutting depth up to 2-1/8''(54mm)at 90° , and cutting depth up to 1-3/8''....
  • ☆ On-tool allen key storage for fast and easy blade changes , High strength aluminum footplate for safety and durability , integrated Laser Guide....
  • ☆ You will get : 1 x cordless circular saw , 1 x 20V 4.0Ah battery , 1 x fast charger , 1 x parallel guide , 2 x 24T Carbide-tipped blades(6-1/2'')....
Check Stock

5.8A Corded Electric Circular Saw with 6 Saw Blades and Laser Guide, Max Cutting Depth 1-11/16'' (90°), 1-3/8'' (45°), Ideal for Wood, Soft Metal, Tile And Plastic Cuts

  • POWERFUL MOTOR & 6 BLADES: Features a 5.8 Amps copper motor to deliver full-size performance at 3,500 rpm. 6 Blades: 2x24T TCT(120mm) for wood cuts/ 2x60T HSS(115mm) for wood and soft metal cuts/ 2pcs grit diamond blade(115mm) for tile cuts.
  • METAL HANDLE & LASER DESIGN: Comes with a unique metal handle, which offers a stronger clamping force to make the cutting more stable. Easy and quick to install and disassemble by rotating the handle without any auxiliary tools. The laser guide ensures a professional and precise cutting line.
  • FLEXIBLE 90° & 45° BEVEL CUTTING: Easy-set depth scaled gauge lever allows the cutting depth up to 1-11/16 inches(42.9mm) at 90°.
  • The bevel capacity at 45° is 1-1/8 inches (29mm). A parallel guide attachment ensures straight, precise cuts easily and quickly.
  • SAFETY DESIGN & ERGONOMIC DESIGN: The double protection switch prevents the machine from accidentally opening, and promises a safer cutting job. The optimized ergonomic slim grip provides ease and less fatigue in operation.
Check Stock

CMT DET-003 Laminate/Veneered Cutter

  • Cutting width 15/32~ 4-21/64-in, cutting depth 0~5/64-In, weight 2.65 lbs..
  • Place your material into the fence provided and have the cutter run along the edge of the panel..
  • Two opposing steel-made circular cutting blades mounted on roller bearings trace the cutting line..
  • Knob on the tool top sets cutting thickness, adjust the strip width by using the scale provided..
  • Loosen and tighten lock knob when reaching the desired cutting width..
Check Stock

Kreg KMA3225 Shelf-Pin Jig 1/4' (6 mm)

  • Two edge alignment knobs position the cup hole from the edge of the door, while the edge pin sets the distance from the top/bottom..
  • The drill guide with metal bushing locks into jig and creates a perfectly straight hinge cup hole.
  • Guide bushings built into body of drilling jig leta you pre-drill pilot holes in 4 common locations, making sure hinges are straight and door closes true. The 1/16″ diameter drill bit for pilot holes is included..
  • Easily set your cup hole depth on the included 35mm drill bit using the built-in depth setting fixtures on the left and right side..
  • The hinge marking guide detaches from bottom of jig and allows you to transfer and mark center lines and hinge location to cabinet wall or frame.
Check Stock

Minova Cordless Circular Saw, 20V 4-1/2''Handiness Mini Saw with 4.0 Ah Lithium Battery, Laser&Parallel Guide, 3 Multifunction Cutting Blades, adapt to wood, plastic, aluminum and other soft materials

  • 【Convenient & Handiness】This cordless circular saw weighs only 4.6 lbs along with battery, bringing less fatigue, suitable for continuous work. Small and compact size for excellent maneuverability and portability..
  • 【Adjustable cutting angle】: The maximum depth of cut at 90°is 1-11/16”and bevel capacity at 45 °is 1-1/8”.
  • Perfect for miter cuts, bevels, framing and edging.
  • Angle guide and quick adjustment gives you a huge degree of versatility in your cuts..
  • 【Powerful & Multifunctional】Powerful motor deliver up to 3,500 RPM for efficient cutting performance. You can use it for cutting wood, soft metals, PVC pipes, plastics with ease. The saw comes with 3 blades (4-1/2"): 24T TCT blade for wood cutting, plastic and other soft materials / 60T HSS blade for Aluminum and soft-metal cutting/ Diamond saw blade for tile or other simailar material. With the provided hex key, you can quickly install and remove the blade..
  • 【Laser & Parallel Guide】Laser guide ensures cutting line on the work piece, gives you a better alignment during cutting. Parallel guide provides scale and allows more precise cutting..
  • 【Safety & Ergonomic】 Double safety switch and blade guard prevent accidents and ensure safer cutting operations. The cordless saw only sta....
Check Stock

Pacific Handy Cutter S5R Safety Cutter, Right Handed Retractable Utility Knife & Ergonomic Film Cutter, Bladeless Tape Splitter, Steel Guard, Safety & Damage Protection, Warehouse & In-Store Cutting , green

  • Safe, Precise Cutting - Designed With A Sturdy Metal Protective Guard To Precisely Guide The High-Quality, Sharp Blade, Keeping Both Workers And Expensive Box Content Safe From Harm, All While Improving Speed And Efficiency. This Uniquely-Structured Steel Guard Will Not Flex, Bend, Or Break Like Other Cutters And Serves As A Guide For Executing The Perfect Cut Every Time, No Matter Who Is Doing The Cutting.
  • Integrated Fold-Out Film Cutter - The Ergonomically Designed Handel Includes A Fold-Out, Recessed Blade Film Cutter That Is Perfect For Safely Cutting Shrink-Wrap, Plastic Straps, Twine And More. The Film Cutter Is Also Replaceable When Blade Becomes Dull.
  • Heavy Duty Tape Splitter - A Sturdy Metal Bladeless Tape Splitter Safely And Easily Slices Through Even Reinforced Fiber Tape, Avoiding Exposure To Blades While Cutting Tape, Which Further Prevents Injuries And Extends The Life Of The Blades.
  • Multiple Blade Depths - Three Adjustable Blade Depth Positions Allow For Reliable, Controlled Top Cutting, Shallow Depth Window And Tray Cuts, And More.
Check Stock

GALAX PRO 4Amp 3500RPM Circular Saw with Laser Guide, Max. Cutting Depth1-11/16'(90°), 1-1/8'(45°）Compact Saw with 4-1/2' 24T TCT Blade, Vacuum Adapter, Blade Wrench, and Rip Guide

  • ...with laser beam guide and the scale ruler, which can assist you to cut a straight line for when high precision is needed. Accurate cuts are assured by the parallel guide and laser light. Angle adjustment for bevel cuts of up to 45°.
  • Depth gauge lever and dust extraction system: This mini circular saw can adjust the cutting depth anywhere from 0 to 1-11/16"(42.8mm) with a max. cut of 42.8 mm in order to adapt to perform better when cutting different materials. Leave your working area free of dust with the vacuum adaptor, for more precise cuts and helping you to focus on the task without the mess.
  • Compact & handy circular saw: Compact body and lightweight perfect for one-handed operation.
  • it features ergonomic soft handles for better hand-feeling and provides optimum cutting line visibility for tight detail work.
  • What you get: 1* Mini Circular saw, 1* 24T tungsten-carbide-tipped wood/plastic blade, 1* allen key for saw change, 1* rip guide, 1* vacuum adapter, 1* user manual, 1* warranty card.
Check Stock

Mini Circular Saw, 4 Amp 4-1/2 Inch Compact Electric Circular Saw with Laser Cutting Guide, 24T Blade, 3500RPM Small Circular Saws, 0°-45° Adjusted, Max depth 48cm, Perfect for Wood and Plastic Cuts

  • ️【Powerful Motor & 3 Saw Blades】Powerful 6.2Amps copper motor delivers full-size performance at 3,500 RPM high cutting speed, you can use HYCHIKA circualr saw to cut wood, plastic, gypsum board, PVC pipes and ceramic tiles. 3 Blades included: 1x24T TCT blades for wood cuts, 1x60T HSS blades for plastic and soft-metal cuts, 1pcs grit diamond blades for tile cuts, extending the applications of the compact circular saw..
  • ️【Precise Scale Ruler and Dust Collection】Equipped with a scale to ensure precise straightness. Greatly improves your work efficiency and cutting performance. The built-in dust collection port and included vacuum adapter allow connection to a shop vacuum or dust collection system, helping you to maintain a cleaner working environment..
  • ️【0-45° Bevel Cutting & Depth Guide】The HYCHIKA compact circular saw allows you to change your cutting angle freely from 0° to 45°(50° max). Equipped with adjustable cutting depth, the max cutting depth of 1-7/8" at 90°and 1-1/4" at 45° can meet your versatile needs. Easy-set depth gauge lever for adjustable cutting depth from 0-32mm(1’’)..
Check Stock