Top Di Pipe Fitting Coupling

Blue 2\ x 100' Pool Pump Water PVC Hose - Backwash Filter Discharge Drain Hose - Blue Lay Flat Trash Pump Rubber Hose

  • Male coupling - Aluminum 2 inch Pipe Thread (NPT).
  • Female Coupling - Brass 2 inch Straight Pipe Thread (NPSH) With Gasket.
  • The Female Coupling Will Only Connect To A Male 2 inch NPT PVC Pipe, Pool Pump or Metal Pipe.
Check Stock

Dixon FAB250N Aluminum Hose Fitting King Short Shank Suction Coupling with Brass Nut 2-1/2 NST Female x 2-1/2 Hose ID Barbed

  • Coupling for connecting a hose to a pipe or fitting.
  • Hose barb on one end and female NST threads on the other.
  • Aluminum shank for resistance to corrosion and chemicals and brass nut for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Barbed fitting for a tight seal on hoses and a rubber seal for high elasticity and resistance to abrasion and impact forces.
  • Nut for tightening threaded fitting with a wrench.
Check Stock

PATIKIL Hose Barb Fitting Elbow 8mm Barbed M14x1.5 Male Thread 2 Pack Carbon Steel Pipe Adapters Connectors for Air Water Fuel Oil Gold

  • Overall Size: 46 x 35mm / 1.81 x 1.38 inch (L*W).
  • Advantage: Carbon steel material features high strength, high pressure, and high-temperature resistance. Leakproof comes with 2 washers for good sealing performance.
  • Instruction: The thread-to-barb pipe fitting is commonly used to connect pipes such as air, gas, water, oil, and fuel in a quick and simple way..
  • Application: The thread-to-barb pipe fitting is a coupling for joining 2 diameter sizes pipes in different directions. Can be used with PE, nylon and PU tubing in industrial environments, for many fluids.
  • Notice: Please confirm the correct size before ordering. You can dip the end of the tubing/hose in hot water for a while for push-on installation easily.
Check Stock

Mudder 100 Pieces 1/4 Inch Straight Barbed Connectors Fitting Drip Irrigation Barbed Coupling Single Barbed Connector for Irrigation Tubing System and Garden

  • Wide range of applications: drip irrigation single barbed connector works well in connecting 2 sections of 1/4 inch mm tubing to direct water to another location, which can be applied for drip irrigation tubing system, flower beds, vegetable gardens, herbs gardens.
  • How to install: just easily install the barbed coupling fitting by push the tubing firmly over the barbed part for a tight fit, not easy to fall off, which has strong holding power with barbed ends, making the connection more firm.
  • No need for glues or tools: after fully inserting straight barbed connectors at the ends of the water pipe, you don't have to use any glue, tools, or clamps to fix the drippers or nozzles, garden work can be much easier and more relaxing.
  • Long term to use: made of quality plastic, this drip irrigation barbed coupling is water and rust resistant, not easy to fade or deform, sturdy and durable to use, which can work as practical fitting for your drip irrigation tubing system for a long time.
  • Sufficient quantity: 1 package comes with 100 pieces of 1/4 inch single barbed connectors, sufficient quantity to use or take as backup, sharing some with close people in your life will also be nice, they are practical fittings for tubing.
Check Stock

TIRDITY 3/4\ Pipe Fittings - 24 Pack 3/4 Inch Black Floor Flange Elbow Tee Combo | Malleable Cast Iron Vintage Furniture Grade Threaded Pipes for DIY Industrial Shelves, Pipe Shelving, Steampunk Decor

  • ...ded to install steampunk pipe fittings. Easy to install, no DIY difficulties to connect Pipe furniture fittings. You will love black iron pipe connectors..
  • 【 MATERIAL OF RAW IRON 】Since threaded metal pipes are unprocessed cast iron parts, we strongly recommend you to clean and seal each part of black steel pipe coupling to ensure they remain rust-free. Our steel pipe fittings are coated with a layer of light black grease so the product may seem dirty upon receipt but still new to use when you clean up the grease..
  • 【 100% NEW PRODUCT 】Every pack of decorative pipe flange fitting that we sell is definitely brand new. Our threaded pipe flange has high quality, steady strength, heavy duty, flexibility and machinability to ensure pleasing appearance and satisfying longevity. If you have any questions about black steel pipe floor flanges, you can contact us. We will respond to you within 24 hours. Your satisfaction is our goal..
Check Stock

SharkBite 3/4 Inch Polybutylene Transition Coupling, Pack of 6, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U4016LF

  • SHARKBITE BRASS PUSH POLYBUTYLENE TRANSITION COUPLING: Polybutylene transition couplings are used to perfectly transition from a polybutylene pipe to another pipe.
  • remove using a disconnect clip or disconnect tongs.
  • COMPATIBILITY: Color-coordinated collars on the ends of the fittings identify which side goes with which pipe.
  • gray collar end works with polybutylene pipe.
  • tan collar end is compatible with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • EASY TO INSTALL: The SharkBite brass transition coupling features a push-to-connect mechanism for a watertight union, and allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this transition coupling can withstand 200 degrees F and 200 PSI.
Check Stock

Jonard M-145/5 Captive Spring Hook, 7\ Length (Pack of 5)

  • Package Content: 10pcs x Expansion Hook Bolt.
  • Eyelet Diameter: 27 x 17mm/1.1" x 0.67" (Outer Dia.*Inner Dia.)(Diámetro del eje del gancho: 5 mm / 0.2' '.
  • Diámetro del ojal: 27 x 17 mm / 1.1' 'x 0.67' '(Diámetro exterior * Diámetro interno).
  • Can effectively prevent expansion pipe turning while tightening the screws,enhancing friction as well..
  • Used in concrete and masonry. Widely used in fence,burglarproof doors and window,canopy,air conditioning fixation,home decoration,engineering, etc..
Check Stock

Z-Rack Replacement Caster Set – 3/4 NPT Pipe Threaded Stem Swivel Rack Casters w/4” x 1” Black Soft Rubber Wheels – 680 lbs Total Capacity – Set of 4 – Service Caster Brand

  • These Service Caster Series #05 swivel rack casters feature 4” diameter wheels and a 4-3/4” mounting height..
  • Weight Capacity: 170 lbs. Capacity Per Caster (680 lbs. Total Capacity).
  • Pipe Threaded Stem: 3/4" NPT (3/4"-14 x 3/4") – Approximately 1-1/16” in diameter – Fits standard 3/4" pipe coupling – The pipe threaded stem screws directly into a standard pipe coupling for a rigid and permanent fit with full swivel action..
  • garment, clothing, and mobile retail racks that use a 3/4" threaded pipe stem..
  • Find other wheel materials, sizes and all Service Caster products at our Amazon Storefront. Click on the “by Service Caster” link above the main title on any Service Caster page listing..
Check Stock

SharkBite 3/4 Inch x 1/2 Inch Reducing Coupling, Pack of 12, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U058LF

  • SHARKBITE BRASS PUSH REDUCING COUPLING: This push-to-connect fitting allows you to make a connection between two different-sized pipes in any combination.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The SharkBite brass reducing couplers allow for easy installation, with no tools, crimping, glue, or soldering required.
  • can be installed in wet lines and approved for underground and behind-the-wall applications with no access panels.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • SPECS: Made with DZR forged brass, this brass reducing coupling can withstand 200 degrees F and 200 PSI.
Check Stock

Daoke 12mm Dia Punch Sleeve Expansion J Type Screws Closed Cup Hook Anchor Bolts 4 Pcs (Color : Multiple Colors)

  • Package Content: 5pcs x Expansion Hook Bolt.
  • Eyelet Diameter: 27 x 17mm/1.1" x 0.67" (Outer Dia.*Inner Dia.)(Diámetro del eje del gancho: 5 mm / 0.2' '.
  • Diámetro del ojal: 27 x 17 mm / 1.1' 'x 0.67' '(Diámetro exterior * Diámetro interno).
  • Can effectively prevent expansion pipe turning while tightening the screws,enhancing friction as well..
  • Used in concrete and masonry. Widely used in fence,burglarproof doors and window,canopy,air conditioning fixation,home decoration,engineering, etc..
Check Stock

DCT 4in Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection

  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
  • 1/8-inch (3mm) quick adaptor coupling thickness.
  • 4.5-inch (11.4cm) quick adaptor coupling length.
  • Fits snugly on dust ports for table saw, planer, jointer, and more.
  • CONTENTS: Package includes (1) quick adapter threaded hose coupling.
Check Stock

4 in. Green Angled Drainage Grate Yard Drain, Yard Drain Emitter for Sump Pump Discharge & Downspout Extensions, Protect Home Foundation & Reduce Stagnant Water, Compatible with 4-Inch Connections

  • ...t occurs in the bottom of typical drop inlets. The drainage grates can prevent critters into the pipe and filling with nesting debris. Our drain grate is perfect for use in hard to drain areas where lack of grade difference is a problem, and works well in cold and frozen conditions. You must use a pvc schedule coupling/adapter/conversion or fitting bell to connect to our drain. (Coupling Not Included).
  • 【Fix Landscape Drainage Problems】The oblique angled drainage grate blends perfectly with a sloped landscaped and holds up perfectly to lawn tractors. Low profile exit grate that keeps critters out of your drainage system without impeding the exodus of storm water. Great for drainage in grass and matches the color of grass and its presloped to work with the slope of the soil. Easy to mow over or around and virtually maintenance-free..
  • 【Easy To Install】Hand trenching or using a small walk-behind trenching machine to create a smooth, even trench or installation. Install the downspout lines by attaching each section of pipe and properly securing them to make sure all water flows out to the exit point. All pipes are verified for flow to the exit point. Install....
Check Stock