Top Die Erweiterung - BuyWiseBest.com

Lionel Racing Kevin Harvick 2019 Busch Harvick Beer 1:64 Nascar Diecast

1: 64 scale die-cast action racing collectables measures 3" X 1.2" X 1".
Driver: Kyle Busch | sponsor: intersate batteries | model Year: 2019 | car Make: Toyota | car model: Camry.
Finish: Standard | Production Quantity: limited edition.
All 1: 64-scale die-cast will come on a base.
Each limited edition 1: 64-scale collectible die-cast includes manufacturer-specific engine detail, die-cast body, and detailed interior. Each 1: 64-scale collectible die-cast also features a dintm (die cast Identification number) for registration as well as a silver sticker with 1 of 0000 indicating production run size..

Adjustable Die Handle Round Die Stock Wrench Holder with adjustable screws. Suitable for making or repairing male and female threads. Good for general purpose applications..
Special Design: High-speed steel machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. With adjustable screws, the die stock can securely hold round dies..
Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened..
Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads..
Measure the size manually. If the product you receive does not meet your needs, please contact us and we will do our best for you..

Includes Carbide Full Length Die, Bullet Seating Die, Powder Thru Expanding Die, Carbide Factory Crimp Die, Universal Shell Holder, Powder Dipper and....

Carbide Die Sets consist of a Carbide Sizer Die, Seater Die, and Bullet Seater Plug.

PRECISE MATING OF LOCK RING: Easy-to-use cross bolt connects the two ends of the ring instead of a traditional screw design that tightens directly into the threads of the die, resulting in a more precise mating of the lock ring threads to the die threads..
RELIABLE ALIGNMENT: Full size lock ring provides a more reliable alignment with no canting, and no damage to the die threads, which remain undamaged..
EASY ADJUSTMENT: Tightening or loosening the steel cross bolt screw requires only a 7/64″ Hex/Allen Key (not included)..
STANDARD FIT: The Forster Cross Bold Die Lock Rings fit standard 7/8″-14 thread dies from most manufacturers..
FOR FORSTER SEATER & SIZING DIE: Works with all Forster Products high-quality sizing and seater dies. The Forster DIE-G-10 is a direct replacement part for the lock rings on Forster sizing and seater dies..

Lathe Tailstock Sliding Tap Die Holder MT2 Shank - Tapping Threading Reaming Drilling - 2MT.
A Tail Stock Tap Die Holder Should Be Among The First Accessories a Machinist Makes For His Lathe, Since Threading With A Hand Held Die Stock....
3 Die Holders Are Interchangeable & Can Hold Die Sizes of 13/16" + 1" + 1-1/2"..
3 Tap Holders Are Interchangeable & Can Hold Taps 0" to 1/4" + 1/4" to 1/2" + 1/2" to 3/4".
EXCLUSIVE - TAP AND DIE HOLDER SET - OTHER SIZE MT1 AND MT3 IN OUR SHOP !.

MINI TOOL SET - The perfect black mini set that has been inspired by Tim Holtz, it's a great accessory to your crafting kit..
DIE PICK - The Die Pick, picks scraps out of dies and small pieces of paper from the die cut-out..
MINI DIE BRUSH - The Mini Die Brush rolls away excess paper in any wafer-thin, chemically-etched die..
MINI FOAM PAD - Mini Foam Pad act as a perfect work surface for removing excess paper from the dies and the cut-out!.
PRODUCT DIMENSIONS – Foam Pad (5. 2” x 0. 5” x 0. 5”).

20 cards 20 die cut shapes 10 card stock sheets 48 interior sentiment stickers 24 Exterior sentiment stickers 24 Exterior sentiment die cuts.
Also includes 72 flower die cuts 48 foil stamped corners 30 foil die cuts 1 mat 1 set of dies 150 foam adhesives 30 envelopes perfect for any crafter.

Includes a Full Length Sizing Die and standard Bench Rest Seater Die in a Deluxe Die Box.
We recommend a Full Length Sizing Die/Bench Rest Seater Die set for each rifle caliber you own.
If using Forster Dies in a Forster Co-Ax press, shellholders are not required.
If using Forster Dies in any non-Forster press, use manufacturer-recommended shellholders.

Hornady Lock-N-Load Die Bushings – The Lock-N-Load bushing system will forever change the way you switch from one caliber to another. Lock-N-Load technology allows you to change dies and start loading another caliber in a matter of seconds. Includes 10 die bushings.
Maximize Reloading Time – Quickly and easily change from one die to another with a simple twist.
Positive Locking Action – Holds the dies in perfect alignment. Compatible with all Hornady Reloading Presses.
The Easy Way – Get the most out of your reloading press. Change the caliber by a simple twist of the die counterclockwise.
How to Use – Thread your die (7/8"-14 thread) into the Lock-N-Load Die Bushing and insert the assembly into the press bushing. Twist it clockwise to lock it in to position, then adjust your die as usual and tighten the lock ring.

With the easy peel strip, these Adhesive Sheets are quick and easy to use. You can use them to transform your die cuts into stickers. Simply peel off the backing, adhere to your card stock, place your die on the card and roll through your die-cutting machine. Peel off the other backing from your die-cut and adhere to your make. Alternatively, you could make the sticker and use the sticky side to adhere glitter or gold leaf to decorate your die-cut..
This package contains ten 6×6 inch adhesive sheets.

ULTIMATE PIPE THREADER SET: Dependable, heavy-duty construction tools including die heads, ratchet assembly, ratchet handle, alloy dies, and a coordinating carrying case for organized use on job sites.
DESIGNED FOR EASE OF OPERATION: Makes threading pipe or conduit quick and effortless and uses individual die heads for each pipe size and manually operated ratchet.
DUCTILE CAST IRON DIE HEADS: Kit includes 1/2-in., 3/4-in., 1-in., 1-1/4-in., 1-1/2-in., and 2-in. sized die heads, and all of the sizes fit in the ratchet without any additional pieces.
CONVENIENT CARRYING CASE: Lightweight yet rugged carrying case accommodates all dies heads in the set to keep them organized and together and features labeled compartments for clear identification.
1/8"-2" PIPE CAPACITY: Works with any 12-R die heads with a 1/8-in. to 2-in. pipe capacity, all threader sets use the same 12-R dies in die head.