Top Digital Manifolds

Eastwood High Temperature Resistant Satin Black Coating Aerosol 11.75 oz

  • Produces A Custom Look For Manifolds, Headers.
  • Temperature Resistant Up To 1400 Degrees.
  • Each Can Is Sufficient To Coat 2 Standard Cast Iron Manifolds Or About 6 Sq Ft.
Check Stock

BBC Holeshot Dual Plane Intake Manifold Oval Port, Plain

  • This Holeshot Manifold by Speedway Motors is the lowest profile intake design.
  • It is the perfect improvement over stock intake manifolds without worrying about hood clearance.
  • Manifolds are a dual-plane intake runner design and machined to accept spread port carburetors.
  • Has a idle-5500 rpm range and an oval port.
  • Features an aluminum construction with a natural finish.
Check Stock

TITAN 757 PERFORMANCE Mercruiser Water Shutter Flappers Replaces 807166A2 V6 4.3L

  • New Mercruiser Water Shutter Kit for 4.3L V6.
  • This will only fit in y-pipe that was on the V-6 engines originally equipped with the one-piece exhaust manifolds. Will not fit later model y-pipes....
Check Stock

GM 4.3L Turbo Kit Hot Parts T3 Cast 4.3 GMC Chevy Turbocharger V6 Wastegate Oil

  • Fantastic design places turbo on the passenger side, very strong manifolds.
  • Parts Included:TurboCharger -cast t3 wastegate block -35/38mm wastegate -pair of cast manifolds -Crossover pipes -Oil line kit.
Check Stock

Drip Depot 4 Zone 1\ PVC-Lock Push to Fit Manifold Kit

  • The unique design of 8 manifolds, with 3 plugs, no need to use so many manifolds for closed management..
  • There are fixed ports on both sides, which are convenient to fix after installation..
  • High temperature resistance, corrosion resistance, aging resistance, and more durable to use..
  • There is a plug at the other end of the straight line. If the connection is needed, just pull out the plug..
  • Applicable to spa massage, hot spring, swimming pool, bathtub massage, etc..
Check Stock

Exhaust Bellows Replace Mercruiser 3-4' 70981A3 Sierra 18-2762 Mallory Marine 9-72808

  • Upper Exhaust Bellows for Mercruiser 3-4" 70981A3 3.0 3.7 5.0 5.7 18 2762 89070.
  • 165/170/3.7L/180/190/470/485/488 manifolds(1980 - 1989) Chevy 305/350/377 (1983 - up) Big block 454/502 (1981 - up) V6 229/262 (1983 - up).
  • After market Ref:Mercruiser:70981A3,Mallory Marine: 9-72808,Sierra: 18-2762,GLM: 89070.
  • Installs on to 3 inch 15 degree center mounted risers with 4 inch elbow.
  • used: 165/170/3.7L/180/190/470/485/488 manifolds(1980 - 1989) Chevy 305/350/377 (1983 - up) Big block 454/502 (1981 - up) V6 229/262 (1983 - up).
Check Stock

Wilmad-LabGlass IG-357-100 Air-Tite 4-Place Double Vacuum Gas Manifold

  • The unique design of 8 manifolds, with 3 plugs, no need to use so many manifolds for closed management..
  • There are fixed ports on both sides, which are convenient to fix after installation..
  • High temperature resistance, corrosion resistance, aging resistance, and more durable to use..
  • There is a plug at the other end of the straight line. If the connection is needed, just pull out the plug..
  • Applicable to spa massage, hot spring, swimming pool, bathtub massage, etc..
Check Stock

2 Manifold Coupler Kit Old Plumbing to New Hot Tub Spa Part for 1-2 Manifolds

  • 2" Manifold Coupler Kit Old Plumbing to New Hot Tub Spa Part for 1-2 Manifolds.
  • This Kit consists of (1) 2" Coupler, 2"Slip X 2"Slip (6") of 2" Flex Pipe, (1) 1/4 Pint of Christy's Red Hot Blue Glue and (1) 1/4 Pint of Christy's....
  • This kit is used to Connect a New 2" Manifold to old 2" Flex or Hard Pipe.
  • This Kit is enough glue to install 1-2 Manifolds.
  • To see our You Tube Video about this kit search for "Spin It to Win It Coupler Kit Plumbing Hot Tubs How To The Spa Guy".
Check Stock

10 inch Sprinkler Valve Box Cover in ground Valve Box Cover Lid Replacement for Circular Sprinkler System Irrigation Control Valve Box,1 Piece

  • The outer diameter of the sprinkler valve cover is 10"..
  • Sprinkler valve box lid with high quality durable plastic, with strong bearing capacity,enough for many years of use..
  • Irrigation valve box cover perfect for sprinkler valves or drip manifolds, flush with the grass , they don't get suck up in the mower..
  • Just snap irrigation valve box cover lid on sprinkler system valve box ,to protect sprinkler valves or drip manifolds, etc..
Check Stock

JEM&JULES Carburetor Intake manifolds CX500 w/boots gaskets for Honda Carb Holders kit

  • ★100% brand-new, never ever been utilized, all parts are tested and quality controlled prior to shipment.
  • ★Fitment: for 1978-1979 Honda CX500 1979-1982 Honda CX500C 1979-1981 Honda CX500D.
  • ★Intake boots become dried out and cracked over time causing air leaks which lead to lean running engines that prematurely fail. Replaces dried out, cracked intake manifolds that can cause engine failure. Give your machine the new power and torque it really deserves, and have more fun with the power at your finger tips..
  • ★Please check pictures for more details, and check your part number and our fitment before placing an order.
  • ★1 set of 2 Brand new Aluminum carb manifolds rubber boots and orings (1 BID = SET OF 2 HOLDERS).
Check Stock

Air Manifold, 5 Way 8 Port Air Compressor Manifold, Aluminum Air Hose Inline Manifold Block Splitter, Pneumatic Manifold Air Distribution Block, NPT 1\\/4 Inch Supply Port, NPT 1\\/4 Inch Output Port

  • Bring Convenience: When your air compressor need to feed several different systems, this product is what you need. Rather than being forced to constantly change connections, you can instead a single hose with this manifold of multiple ports, a really functional product..
  • Excellent Quality: The air manifold is made of aluminum alloy, which is highly corrosion-resistant, not easy to deform, durable and lighter than other material. The ports are based on standard size for easy mounting..
  • Working Parameters: The working pressure is 0-1MPa, maximum working pressure is 1.2MPa, working temperature is 32 - 140 °F. If you want to know more about the products, please feel free to contact us..
  • Easy to Use: Unlike other manifolds on the market, our air manifolds are all designed with NPT threads instead of PT threads or G threads, so the fit is tighter, no air leakage and easy to mount. Each port is well arranged for enough space..
  • Wide Application: It is suitable for the situation when multiple tools need to access an air compressor, so it is widely used for air compressor, cylinder, vacuum engine and other similar system, or used as supporting parts of machine equipment..
Check Stock

Air Manifold, 5 Way 7 Port Air Compressor Manifold, Aluminum Air Hose Inline Manifold Block Splitter, Pneumatic Manifold Air Distribution Block, NPT 1\\/2 Inch Supply Port, NPT 1\\/4 Inch Output Port

  • Bring Convenience: When your air compressor need to feed several different systems, this product is what you need. Rather than being forced to constantly change connections, you can instead a single hose with this manifold of multiple ports, a really functional product..
  • Excellent Quality: The air manifold is made of aluminum alloy, which is highly corrosion-resistant, not easy to deform, durable and lighter than other material. The ports are based on standard size for easy mounting..
  • Working Parameters: The working pressure is 0-1MPa, maximum working pressure is 1.2MPa, working temperature is 32 - 140 °F. If you want to know more about the products, please feel free to contact us..
  • Easy to Use: Unlike other manifolds on the market, our air manifolds are all designed with NPT threads instead of PT threads or G threads, so the fit is tighter, no air leakage and easy to mount. Each port is well arranged for enough space..
  • Wide Application: It is suitable for the situation when multiple tools need to access an air compressor, so it is widely used for air compressor, cylinder, vacuum engine and other similar system, or used as supporting parts of machine equipment..
Check Stock