Top Digital Oscilloscope Frequency Counter

AUKUYEE Updated 2.4″ TFT Digital Oscilloscope Kit with Power Supply and BNC-Clip Cable Probe Q15001 (Assembled Finished Machine)

  • Digital DIY oscilloscope uses ARM Cortex-M3 processor and contains a 2.4-inch color TFT display, which can be used as an ARM development test board..
  • Let you effectively observe and measure signal waveforms in many occasions such as audio, video synchronization, low-frequency switching power supply, infrared receiving and transmitting..
  • Can make a tailor-made software development on the basis of this kit, which can be can be changed to millivoltmeter, data recorder, etc..
  • The variety of components is suitable for students to understand the oscilloscope structure and principles, and do in-line component welding, and chip component welding training..
  • The oscilloscope kit is a kit specially designed for professional teaching and training in electronics. Please note that this kit need to be assembled and soldered by yourself..
Check Stock

allsun Handheld Digital Oscilloscope Multimeter DIY Portable Automotive Diagnostic Lab Scope 3 in 1 Color LCD Display DMM 50MHz Single Channel

  • Digital Oscilloscope is portable tool for waveform measurement. In contrast with analog oscilloscope, desktop digital oscilloscope or digital multimeter, it is one of the best test tool for use in teaching or field.
  • The handheld oscilloscope the bandwidth is 50 MHz, the sampling rate is 200 MSa/s, and it owns 320*240 mm high-resolution color-screen, auto function works great and gives the best results most of the time, saving time and adjustments.
  • The Automotive Oscilloscope combines scope function, multimeter function and signal generator function,it is a beautiful looking unit works pretty well and has a nice feel from the rubber case.
  • The oscilloscope can quickly and accurately detect the faults of the circuit under test and can serve as an electronic engineer's assistant, and will provide great convenience for you in work.
  • The portable oscilloscope fetures 6000-count high-precision multimeter chip, NPX intelligence collection chipset. 4100 mAh Sony lithium-battery long working hours.
Check Stock

DSO 138 DIY Oscilloscope Kit Opening Source 2.4″ TFT 1MSPS Digital Oscilloscope Kit with DIY Parts & Probe, Handheld Pocket Sized 13803K, SMD Soldered Electronic Learning Set

  • Digital DIY oscilloscope uses ARM Cortex-M3 processor and contains a 2.4-inch color TFT display, which can be used as an ARM development test board..
  • Let you effectively observe and measure signal waveforms in many occasions such as audio, video synchronization, low-frequency switching power supply, infrared receiving and transmitting..
  • Can make a tailor-made software development on the basis of this kit, which can be can be changed to millivoltmeter, data recorder, etc..
  • The variety of components is suitable for students to understand the oscilloscope structure and principles, and do in-line component welding, and chip component welding training..
  • The oscilloscope kit is a kit specially designed for professional teaching and training in electronics. Please note that this kit need to be assembled and soldered by yourself..
Check Stock

1HZ-500KHZ FG-100 DDS Functional Signal Generator Frequency Meter Signal Source Module Frequency Counter

  • Feature FG-100 DDS Function generator is a low frequency signal generator..
  • It is small size, full function, easy operating and portable. Its power supply can be either AC/DC adaptor or a Lithium battery..
  • Working with an oscilloscope, it can be used to troubleshoot the electronic circuit, characterize the audio amplifier frequency response or measure the impulse response..
  • Due to the excellent DSS accuracy and frequency stability, it can also be used to calibrate the sweep time factor for oscilloscopes. You can also use its square wave to calibrate your oscilloscope attenuator or adjust your oscilloscope probe.
  • Have a filter (can be opened and closed) to suit the output of sine wave and pulse wave..
Check Stock

OWON Oscilloscope HDS272 2 in 1 2CH Digital Handheld Oscilloscope Multiumeter 3.5\ LCD 70MHz Bandwidth 20000 Counts Multiumeter OSC+DMM+for Automobile Maintenance,Power Detection

  • Parameter---HDS272 3.5 inch LCD automotive oscilloscope with 2 channel (oscilloscope+multimeter), 70MHz bandwidth, 250MS/s sample rate, 8K record length.
  • 2-in-1---2CH digital oscilloscope with 2 in 1 function, portable oscilloscope built-in multimeter is very handy. You can work well done with one device for your jobs or your experiments. At the same time, its detection date is very accurate, 20,000 count DMM, Scope update rate at 10k/s, perfect ranges of sweep time and vertical scales..
  • Crisp and Portable---Crisp and bright 3.5 inch color LCD screen, showing a higher resolution larger character display, even though in dim ambient light situations or outdoor environment, digital oscilloscope can be intuitive in its read. This handheld oscilloscope is portable and comfortably fits in the hand. It is much lighter, easier and perfect for field use. Practical and intuitive menu page layout, it is intuitive and handy in its use..
  • Excellent battery life---Power by standard 4400mAh 18650 Lithium battery, portable oscilloscope can work continuously for about 6 hours, a single battery can supply power normally, which are....
Check Stock

ALMOCN for Digital Oscilloscope Kit Open-sourced 2.4″ TFT 1MSPS for Digital Oscilloscope DIY Kit Handheld Pocket Sized 13803K, SMD pre-soldered

  • Digital DIY Oscilloscope Kit uses ARM Cortex-M3 processor (STM32F103C8), 2.4-inch color TFT display screen can be used as ARM test development board. Can freeze at any time waveform display (HOLD function).Comes 1Hz /3.3V square wave test signal source..
  • Can be secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers.Adjustable vertical displacement, and with instructions..
  • With automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable..
  • With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
  • The oscilloscope kit is a kit specially designed for professional teaching and training in electronics. Please note that this kit need to be assembled and soldered by yourself..
Check Stock

Riiai 2-in-1 Digital Oscilloscope & Transistor Tester, Real-time 2.5MS/s Sampling Rate 200kHz Bandwidth, 2.4 inch TFT Color Screen, PWM Square Wave Output, Diode Voltage Continuity Tester

  • ⭐【2 in 1 Oscilloscope & Transistor Tester】--- This portable digital oscilloscope combines an electronic component tester, PWM signal generator, and other functions into one."Oscilloscope" mode to test the signal waveform of the circuit while"Mos Test" mode can test various types of transistors and can identify device type, pin polarity, hFE, turn-on voltage, junction capacitance, resistance, inductance components and etc. More cost-effective to use, more test functions to choose from..
  • ⭐【High-precision & Real-time Display】--- The oscilloscope has a real-time sampling rate of 2.5MS/s and a 200kHz bandwidth. Up to ±400V voltage signal can be measured. Self-contained 80Khz/5.0V PWM wave test signal source with adjustable duty cycle. With a Single, Normal, Automatic trigger, it can be used for both periodic and aperiodic digital signals. Other modes include circuit continuity test, 0-16V input voltage measure, PWM output, 0-24V Zener diode measure and etc..
  • ⭐【2.4 Inch TFT Screen & 1500mah Rechargeable Battery】--- The transistor tester adopts a built-in 1500 mah battery that will get fully charged within 1-2 hours via a 5V/2A adapter and can work for 4 hours(Finish Green Indicator/Charging Red Indicator). The digital handheld pocket oscil....
Check Stock

FNIRSI 1013D Plus Oscilloscope – Portable Handheld Tablet Oscilloscope with 100X High Voltage Prob, 2 Channels 100Mhz Bandwidth 1GSa/s Sampling Rate 7″ TFT LCD Touch Screen

  • Professional Designed: FNIRSI oscilloscope has a real-time sampling rate of up to 1GSA/S and an analog bandwidth of 100MHZ * 2. Fnirsi oscilloscope has a complete trigger function (single/normal/automatic), it can be used freely for both periodic analog signals and aperiodic digital signals..
  • Highly Performance: 7 inches, 800 * 480 resolution, bright colors and high contrast. Ultra-thin and easy to carry. Built-in high-voltage protection module,can tolerate a continuous voltage of up to 400V. 6000mAh high-performance lithium battery, can be used continuously for 4 hours after fully charged..
  • Easy to Operate: Equipped with efficient one-button automatic device. One-click waveform saving and screenshots. The built-in 1GB storage space can store up to 1000 screenshots 1000 sets of waveform data.Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc.
  • Easily Measuring : Capacitive screen touch & gesture operation, cursor measurement function, when manually reading amplitude-frequency parameters, you do not need to read the background scale unit and quantity, and you can directly get the peak-to-peak value and frequency without conversion..
Check Stock

diymore Oscilloscope Case DIY Kit 2.4

  • It is simple to finish assembling the oscilloscope case kit pieces. It does fit like a glove.
  • diymore oscilloscope acrylic case will offer excellent protection while maintaining the beauty of your digital oscilloscope.
  • Note: The Kit doesn't include the oscilloscope, wish you could understand.
  • It is a function of design which this fits, all the parts were cut correctly and fit perfectly when assembled.
  • Acrylic material, looks transparent(need to tear down the film).
Check Stock

P4250 Oscilloscope Probe High-Voltage Probe Oscilloscope Probe BNC Oscilloscope Scope Clip Probe Test Lead Kit

  • DETACHABLE HOOK TIP: The oscilloscope scope clip probe has detachable hook tip, the hook is well protected by the plastic case.
  • HIGH PRECISION: Oscilloscope probe has insulated BNC head, high precision, suitable for all standard BNC head oscilloscope.
  • EASY TO USE: Oscilloscope clip probes have compact size, several functions combined in one, this probe is convenient to use.
  • STABLE PERFORMANCE: Locating sleeves of oscilloscope passive probes ensure the stability and reliability of the tip exposed to the test point.
  • PRACTICAL: Marker rings of digital oscilloscope clip probe in different colors help to identify different channels.
Check Stock

OWON HDS272S Oscilloscope 3 in 1 Professional Handheld PC Oscilloscope,20000 Counts Digital Multimeter, Universal Test Instrument, Large Capacity Lithium Battery(70 MHz+2CH+1CH Waveform Generator)

  • ✨[20000 Counts Digital Multimeter ]: Digital multimeter be used to measure AC/DC voltage/current, resistance,diode,capacitance,on-off test. High sensitivity and accuracy, showing clear, stronganti-overload capability, easy to carry..
  • ✨[Small Size & Powerful Function]: Mobile phone body,Oscilloscope, Digital Multimeter multifunction in one.3.5-inch high-resolution,high-contrast color LCD display,suitable for outdoor use..
  • ✨[Great Power Management]: Ultra-low comprehensive power consumption less than 3W.Powered by 4400mAh lithium battery.The lithium battery may not be fully charged when delivered. To make the battery fully charged, it takes up to 4.5 hours (when the device is turned off) or it is subject to the charging indicator. After charging, the battery can supply power for about 6 hours..
  • ✨[Excellent Oscilloscope Performance]: OWON Handheld Oscilloscope have two acquisition modes,high refresh,deep storage,7 kinds of auto measurement,cursor measurement function and save function..
  • ✨[Waveform Generator Functions]: 70 MHz Digital Oscilloscope with 1-CH 125MSa/s Sampling Rate,20mVpp-5Vpp Amplitude Range, 8K Waveform Length, 14 bits Vertical Resolution and 50Ω Output Impedance..
Check Stock

Rigol MSO5074 - Four Channel, 70 MHz Digital/Mixed Signal Oscilloscope

  • 70 MHz Digital Oscilloscope with 4 channels, 8GS/s, 100Mpoint memory.
  • Four channel, 70 MHz digital / mixed signal oscilloscope.
  • 100 Mpts memory depth, optional memory depth up to 200 Mpts.
  • 16 digital channels included - requires optional PLA2216 logic probe to operate.
Check Stock