Top Dmm Temperature Probe

OWON Current Clamp Meter Multimeter CP-05+ Clamp Current Probe 200KHz 400A for Oscilloscope 4A 40A 200A 200-400A Test Range with BNC Connector

  • ¡¾BNC connector¡¿The current clamp Multimeter features a BNC connector and can be plugged directly use. After connected well, switch the current clamp on (power LED should light) and then clamp the jaws around the current carrying conductor as shown. Typical Uses The AC/DC Current Probe simply offers the best value for money without compromising resolution..
  • ¡¾Multiple Test Ranges¡¿The OWON CP-05+ current clamp is ideal for use with automotive oscilloscopes for measuring currents between 1 mA and 400 A. Various current test range, 4A, 40A, 200A, 200-400A test range are available.Low noise level, and high detection accuracy..
  • ¡¾Easy to Use¡¿The current clamp has range selection settings, set by a slider switch on the handle of the probe. In use there is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current carrying conductor. No electrical contact is required. These current clamps have been designed for use with oscilloscopes..
  • ¡¾Portable¡¿Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra....
Check Stock

RTD Temperature Probe Sensor Replacement Parts for Camp Chef Wood Pellet Smoker Grill Temp Probe

  • Temperature Probe for Camp Chef Pellet Grill.
  • RTD Probe for Camp Chef Dlx Series, PG 22-24, PG24MZG, Woodwind, PG24-44, etc.
  • GREAT Camp Chef Rtd replacement probe and/or additional probe.
  • Digital control meat probe capability, Maintains more consistent temperatures.
  • Waterproof and healthy material,that gave you the ability to keep an eye on the internal temperature of both a whole small food at the same.
  • Camp Chef temperature probe package includes probe and screws with nut.
Check Stock

High-Temperature Meat Temperature Probe Compatible with Green Mountain Grill/GMG Pellet Grills Works with Jim Bowie Daniel Boone Choice & Davy Crockett Grills GMGP-1035/GMGP40

  • [FITMENT] Meat Temperature Probe, Compatible with Green Mountain Grill fits for Green Mountain Grills, Jim Bowie, Daniel Boone Choice & Davy Crockett....
  • [REPLACE PART NUMBER] GMGP-1035/GMGP40 High-Temperature Meat Temperature Probe..
  • [FUNCTION] The Temperature Sensor Probe reads the internal temperature inside your BBQ and sends a signal back to the controller to maintain....
  • [SPECIFICATIONS] Temperature Probe Sensor 5"(12cm) Probe Sensor, 40"(100cm) heat woven Wires. 1/4” / 6.27mm Plug..
  • [SERVICE GURANTEE] Package include: 1Pc x GMGP40 Meat Temperature Probe, if it fails, feel free to contact us any time..
Check Stock

Extech EX410A Professional True RMS Multimeter with 8 Functions

  • Averaging DMM with 8 functions and 0.5% basic accuracy.
  • AC/DC voltage & current, resistance, temperature, diode/continuity.
  • Input fuse protection and mist-connection warning.
Check Stock

MASTECH MS8229 Digital Temperature Humidity Lux Sound Meter Multimeter

  • DMM + Lux Meter + Humidity Meter + Sound Level Meter + Thermometer.
  • 20%-95% RH 40-100 dB 40000 LUX -4-1832F 0-200 KHz 0-100 uF.
  • LED / Sound Warning shows you where to plug the test leads.
  • Built-in Temperature & Humidity Sensors show you the environmental temperature and humidity.
Check Stock

Replacement Temperature Meat Probe Compatible with Green Mountain Grills Works with GMG Pellet Grills Daniel Boone Choice& Jim Bowie Choice Grill

  • REPLACE OEM ACCESSORIES - Grill temperature probe Compatible with Daniel Boone Choice/ Jim Bowie Choice Pellet Grill (TIP: Only fit for GMG Choice....
  • PLUG AND PLAY - Replacement part for GMGP-1035/ GMGP40. It's easier to know when meat is ready with a high-temperature meat probe..
  • MEAT PROBE STORAGE - To avoid damage to the temp probe, the grill probe should be rolled into a large and loose coil during storage.
  • BE CAREFUL WITH MOISTURE - Only the tip of the probe is waterproof. Smoker temperature probe, 5" probe length, 43" line length.
  • FRIENDLY SERVICE - If you have any questions, please contact us through Amazon Messenger..
Check Stock

GRILLME Replacement High-Temperature Meat BBQ Probe for Camp Chef NTC Pellet Grills

  • For use with all meats, great replacement probe and/or additional probe.
  • High-Temperature Meat BBQ Probe, Replacement for Camp Chef Pellet Grills.
  • Monitor the meat temperature or ambient temperature (smoker/grill).
  • The tip of the probe tube can be run under a tap or cleaned with a damp rag.
  • The probe can be used for either BBQ or food..
Check Stock

Upgraded Thermpro Probe Replacement for TP08S TP20 TP25 Thermopro Probe ReplacementTP17 TP16 TP10 TP09 TP08 TP-08S TP-07 TP06S TP04

  • [Ready to use, Hassle-Free Setup] New upgrade, Better quality. Perfect replacement grill meat oven probe of ThermoPro TP20 TP-08S TP-07 TP06S TP09....
  • [Replacement or Spares Replacement Probe] 2pc probe for food and ambient temperature. Grill/BBQ/ Oven/Smoker temp and Food..
  • [High-Temperature, Waterproof and Easy to Clean] Probe and Wire can withstand up to 716°F(380°C). The tip of the probe tube can be run under a tap....
  • [Accuracy & Wide Temperature Range] The replacement high-temperature meat probe Accurate within ±1.8°F, Monitor temperature range 32°F to 716°F..
  • [Customer Service] Manufacturer warranty for 90 days from the date of purchase.
Check Stock

Mastech MS8229 Auto-Range 5-in-1 Multi-Functional Digital Multimeter

  • Dmm + Lux meter + humidity meter + sound level meter + thermometer.
  • 20%-95% RH 40-100 dB 40000 Lux -4-1832f 0-200 kHz 0-100 UF.
  • LED/sound warning shows you where to plug the test leads.
  • Built-in temperature & humidity sensors show you the environmental temperature and humidity.
Check Stock

Dual Probe Digital Meat Thermometer for Cooking and Grilling with Backlight & Calibration Instant Read Kitchen Food Thermometer for BBQ Baking and Candy Thermometer for Christmas

  • ...er more convenient to use, our thermometer not only has a rotation probe, but also a 47.6 inches long wire probe, which can be use in the oven..
  • Fast and Accurate Reading: Our meat thermometer only takes 2-4 seconds to measure the food, with accurate display and clear readings. Press the ℉/℃ button to switch the temperature. Press the hold button to lock the current temperature. What’s more, you can turn on the backlight..
  • Easy to Use: Rotate the built-in probe or insert the wired probe into the pinhole to turn it on, fold or unplug the probe to turn it off. The unit will automatically turn off after 5 minutes if no other buttons are pressed to keep battry life and extend the use time..
  • Calibration & Temperature Alarm Set: The temperature setting can refer to the meat temperature guide. Pre-set the temperature, after the thermometer reaches the appropriate temperature you have adjusted, it will automatically alarm, which can save you cooking time. After multiple uses, if you are not confident in the accuracy of the thermometer, you can check or calibrate the temperature yourself..
  • IPX7 Waterproof: Built for durability, our digital meat thermometer can be washed under running water. It also withstands drops and other kitchen accidents! Please take c....
Check Stock

Mastech MS2108 True-RMS AC/DC Clamp Meter with Inrush Current Measurement

  • Dmm + Lux meter + humidity meter + sound level meter + thermometer.
  • 20%-95% RH 40-100 dB 40000 Lux -4-1832f 0-200 kHz 0-100 UF.
  • LED/sound warning shows you where to plug the test leads.
  • Built-in temperature & humidity sensors show you the environmental temperature and humidity.
Check Stock

SeedRanch Falcon IV Turf Type Tall Fescue Grass Seeds - 50 lbs.

  • Monitor pH up and down, temperature, nutrient (TDS) level in water to maximize your grow and ensure plants get a balanced feed.
  • General uses includes growing tent and reservoir.
  • Selectable conductivity units include TDS, EC, ppm 500, ppm 700 and CF.
  • This hydroponics tester has ATC that provides consistent reading regardless of any fluctuations in temperature.
  • High and low alarm when outside parameters, selectable units include TDS, EC, ppm 500, ppm 700 and CF.
  • Lab quality glass pH probe with easy two point calibration.
  • Conductivity / temperature probe comes factory calibrated so it's ready to be used.
  • Double junction probe is more accurate than test strips and drops.
  • Combine with Bluelab pen and meter for full garden nutrients monitoring in water and soil.
  • Other features: International power supply, water resistant design.
  • KIT INCLUDES: Calibration solution, EC probe and pH probe, probe care kit is sold separately.
  • Made in New Zealand and manufactured by Bluelab, the industry leader in hydroponic testing equipment, built for growers.
  • 2-Year Limited Warranty with proof of purch....
Check Stock