Top Drain Pipe Fitting

Camco 20856 28"ID x 2" Aluminum Drain Pan with CPVC Fitting

  • Durable pans will not rust, corrode or crack.
  • Included CPVC drain fitting will fit 1″ or 1.5″ Drain pipe.
Check Stock

LeiJunDuoRong Drain Strainers/Plastic Grate/Resin Plastic Strainers Strainers/Sewer Cover Grates/Drain Sewer Cover/Plate Grid Rainwater Grate Rectangular Well Cover/Drain Garage black 19.7x11.8x0.8in

  • Protect your drainage system by using a grate on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Ideal for draining light water flows from small lawns, landscaped areas, walkways, and patios.
  • Fits 4 in. Sewer and Drain Pipe & Fittings, 4 in. Single-Wall Corrugated Pipe, 4 in. Triple-Wall Pipe. 12 GPM flow rate. 3.9 sq. in. open surface area. Rated for NDS Class A loads (up to 60 psi) when properly installed—recommended for pedestrians, bicycles, and wheelchair traffic.
  • Place on top of drain pipe or drain fitting for a soil-tight fit. 4 in. Round Drain Grates are available in a variety of colors.
Check Stock

Universal Downspout to Drain Pipe Tile Drainage Adapter (Black, 2x3x3)

  • Our universal downspout tile adapters are perfect for making the transition from the downspout to your drain tile.
  • These adapters are slightly over sized for a 2x3 inch downspout to make it easy to slip the downspout in to fitting.
  • For use with black corrugated pipe, pvc schedule 40, sdr 28 & 35 sewer pipe.
Check Stock

Toolazy Ebb & Flow Fitting Kit，Ebb and Flow Fitting Complete Kit Combo Set with 2 Extensions

  • HIGH QUALITY PLASTIC ： Each kit is made from 100% black virgin plastic and is BPA free。.
  • TIDAL IRRIGATION SYSTEM ： Can be used for hydroponics, Tidal irrigation, Aeroponic, aquaponics, flood and drain and drip irrigation systems。.
  • PACKAG KIT ： Ebb & Flow Kit Fill & Drain Fitting comes sealed in a bag，1/2" Tub outlet fitting(1 piece), 3/4" Tub outlet fitting(1 piece), Screen fitting(2 piece) and outlet extension fitting(3 piece)。.
  • EXCELLENT QUALITY ： Filling/draining kits made with the highest quality materials and craftsmanship, strict quality control to ensure tight fit。.
  • INCREASED VERSATILITY ： Thread PVC pipe fittings into bulkhead fittings，Used in homemade tidal irrigation systems。.
Check Stock

PVC Termination Cap Mesh Screen Vent Cover, Furnace & Roof Vent Cap, Stainless Steel Wire Round Exhaust Pipe Cover End 4

  • ...nch and the outer diameter measures 4.5" inch, therefore any pipe connected with mesh pipe cover WILL NOT FIT so adapter such as PVC / rubber elbow or coupling must be purchased separately (not included) - please see listing images and infographic below for more details on compatible size to ensure correct pipe cap fitting.
  • PRODUCT PATENT: PVC drain screen cover with wire round mesh screen built in slot allows water condensation to drain out on the side of the PVC vent screen cap attached to the exposed pipe outdoor through the ground, wall, or roof as shown in the listing images and infographic.
  • SIMPLE & COMPATIBLE: mesh screen vent cover is easy to install and no effort is required by inserting the termination vent cap inside the hub or adapter of the PVC / rubber elbow or coupling (not included) compatible with pipes connected to high efficiency furnace, steam, water heater, air intake, exhaust, roof vents, sewer and water drains.
  • TOUGH: the white stainless steel termination vent mesh screen cover is the best pipe cover for outdoor that won't corrode or rust preventing leaves, debris, birds, bugs, and wildlife from entering the mesh screen vent pipe cover.
  • AIRFLOW: PVC pipe cover works as pipe screens with stainless steel mesh screen cap that allows m....
Check Stock

Eastman 60079 Water Heater Drain Pan 24 inch ID x 26 inch OD 24 x 26 Aluminum Silver

  • The drain pan has an outer diameter (OD) of 26 inches with an inner diameter (ID) of 24 inches.
  • Constructed of heavy-duty aluminum for extra strength and durability.
  • Protects nearby fixtures and floors from water runoffs.
  • Includes (1) drain pain and (1) 1 inch PVC fitting for a drain pipe connection.
Check Stock

Camco 20932 Water Heater Drain Pan 30-Inch x 30-Inch x 6-Inch

  • Bottom of the pan measures 30" x 30" x 4" Deep.
  • Included PVC drain fitting will fit 1" or 1.5" drain pipe.
Check Stock

Camco 20922 Water Heater Drain Pan, 24-Inch x 24-Inch x 4-Inch

  • Top of the pan measures 25.25″ x 25.25″.
  • Bottom of the pan measures 24″ x 24″ x 4″.
  • Included PVC drain fitting will fit 1″ or 1.5″ drain pipe.
Check Stock

4 in. Green Angled Drainage Grate Yard Drain, Yard Drain Emitter for Sump Pump Discharge & Downspout Extensions, Protect Home Foundation & Reduce Stagnant Water, Compatible with 4-Inch Connections

  • ...al drop inlets. The drainage grates can prevent critters into the pipe and filling with nesting debris. Our drain grate is perfect for use in hard to drain areas where lack of grade difference is a problem, and works well in cold and frozen conditions. You must use a pvc schedule coupling/adapter/conversion or fitting bell to connect to our drain. (Coupling Not Included).
  • 【Fix Landscape Drainage Problems】The oblique angled drainage grate blends perfectly with a sloped landscaped and holds up perfectly to lawn tractors. Low profile exit grate that keeps critters out of your drainage system without impeding the exodus of storm water. Great for drainage in grass and matches the color of grass and its presloped to work with the slope of the soil. Easy to mow over or around and virtually maintenance-free..
  • 【Easy To Install】Hand trenching or using a small walk-behind trenching machine to create a smooth, even trench or installation. Install the downspout lines by attaching each section of pipe and properly securing them to make sure all water flows out to the exit point. All pipes are verified for flow to the exit point. Install a yard grate at the end of the....
Check Stock

Rheem AP12934 Plastic Water Heater Drain Pan with Fittings, 20-Inch

  • For best results, use only Rheem replacement parts for repairing your Rheem Water Heater.
  • Material: Plastic, Shape: Round, Diameter – Bottom (in.): 20, Diameter – Top (in.): 22.
  • Height (in.): 2-3/4, Drain Hole Size (in.): 1, PVC Drain Fitting: Glue-in for 1 in. pipe.
Check Stock

20 Pcs of PVC Pipe Plug,Eau 3/4 NPT Water Heater Drain Plug Compatible with RV,Irrigation,Underground Sprinkler Systems,Swimming Pools,Outdoor Applications and Water Supply Lines.

  • The 3/4 NPT pipe fitting plugs made of durable PVC material. They are highly resilient, with high-tensile and high-impact strength..
  • PVC Sch. 40 pipe caps meet standards: ASTM D 1784, ASTM D 2466, NSF 14 and 61. 3/4 water heater drain plug has better sound deadening qualities than....
  • 3/4 PVC pipe plugs maximum working pressure of 2.5 MPA which are used perfectly in irrigation, underground sprinkler systems, swimming pools, outdoor....
  • One order comes with 20 pieces 3/4 inches 11630 water heater drain plug, convenient for your replacement, also suitable for using as a backup.
  • Require no special tools for cutting and to be installed with solvent cement.
Check Stock

PVC Pipe Reamer with 1-½-Inch Head Aluminum, PVC Fitting Saver, PVC Socket Saver with 0.315″ Hex Shaft, For Water Lines, Drain Lines, Vent Lines

  • Robust Build Quality: This PVC fitting saver built with premium quality aluminum alloy body with stainless steel hex key shaft, durability and high hardness..
  • Feature: Whether you are a professional or not, Gohelper PVC reamer is excellent for you. It is works great for Schedule 40 PVC Pipe, CPVC and ABS Ventilation pipe, drain pipe, water pipe, but it does NOT work on schedule 80 pipe..
  • Compatibility: PVC fitting saver come with 0.315″ hex key shaft design can be compatible with standard drills, cordless drills, or impact drills. It is very suitable for family and temporary work..
  • Durable and Versatile: Square carbide insert provides four cutting surface, you can be turned 90 degrees for new cutting surface before use, the cutting efficiency is higher and faster..
  • Note: It is recommended to use a variable-speed electric drill with low-speed cutting.
  • Appropriately add water for cooling to prevent the pipeline from melting at high temperature,Check if the hex key shaft is locked or not before use. Warm tips: CN,US,EU Patent Pending..
Check Stock